diff mbox series

arm64: dts: imx8mq: Default parents for PCIE1 clocks

Message ID 1562235864-12953-1-git-send-email-abel.vesa@nxp.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: imx8mq: Default parents for PCIE1 clocks | expand

Commit Message

Abel Vesa July 4, 2019, 10:24 a.m. UTC
Set default parents for PCIE1_CTRL and PCIE1_PHY clocks.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Shawn Guo July 22, 2019, 6:48 a.m. UTC | #1
On Thu, Jul 04, 2019 at 01:24:24PM +0300, Abel Vesa wrote:
> Set default parents for PCIE1_CTRL and PCIE1_PHY clocks.

Can you add a few words about why this change is necessary?

Shawn

> 
> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> index e3df9b8..23bf85f 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> @@ -235,6 +235,10 @@
>  		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
>  		 <&pcie0_refclk>;
>  	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> +	assigned-clocks = <&clk IMX8MQ_CLK_PCIE1_CTRL>,
> +			  <&clk IMX8MQ_CLK_PCIE1_PHY>;
> +	assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
> +				 <&clk IMX8MQ_SYS2_PLL_100M>;
>  	status = "okay";
>  };
>  
> -- 
> 2.7.4
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index e3df9b8..23bf85f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -235,6 +235,10 @@ 
 		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
 		 <&pcie0_refclk>;
 	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+	assigned-clocks = <&clk IMX8MQ_CLK_PCIE1_CTRL>,
+			  <&clk IMX8MQ_CLK_PCIE1_PHY>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+				 <&clk IMX8MQ_SYS2_PLL_100M>;
 	status = "okay";
 };