| Message ID | 1567517277-30919-1-git-send-email-Anson.Huang@nxp.com (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 4c2435a6572bf3c59dd86be31c223bf09a7e1e61 |
| Headers | show |
| Series | [V2] arm64: dts: imx8mn-ddr4-evk: Enable GPIO LED | expand |
On Tue, Sep 03, 2019 at 09:27:57AM -0400, Anson Huang wrote: > i.MX8MN DDR4 EVK board has a GPIO LED to indicate status, > add support for it. > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Applied, thanks.
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts index b698061..bf1c097 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts @@ -15,6 +15,18 @@ stdout-path = &uart2; }; + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + status { + label = "yellow:status"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -54,6 +66,12 @@ >; }; + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
i.MX8MN DDR4 EVK board has a GPIO LED to indicate status, add support for it. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> --- Changes since V1: - Mention color in the label. --- arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)