@@ -7564,6 +7564,8 @@ F: arch/x86/include/asm/trace/hyperv.h
F: arch/x86/include/asm/hyperv-tlfs.h
F: arch/x86/kernel/cpu/mshyperv.c
F: arch/x86/hyperv
+F: arch/arm64/include/asm/hyperv-tlfs.h
+F: arch/arm64/include/asm/mshyperv.h
F: drivers/clocksource/hyperv_timer.c
F: drivers/hid/hid-hyperv.c
F: drivers/hv/
new file mode 100644
@@ -0,0 +1,408 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * This file contains definitions from the Hyper-V Hypervisor Top-Level
+ * Functional Specification (TLFS):
+ * https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs
+ *
+ * Copyright (C) 2019, Microsoft, Inc.
+ *
+ * Author : Michael Kelley <mikelley@microsoft.com>
+ */
+
+#ifndef _ASM_HYPERV_TLFS_H
+#define _ASM_HYPERV_TLFS_H
+
+#include <linux/types.h>
+
+/*
+ * All data structures defined in the TLFS that are shared between Hyper-V
+ * and a guest VM use Little Endian byte ordering. This matches the default
+ * byte ordering of Linux running on ARM64, so no special handling is required.
+ */
+
+
+/*
+ * While not explicitly listed in the TLFS, Hyper-V always runs with a page
+ * size of 4096. These definitions are used when communicating with Hyper-V
+ * using guest physical pages and guest physical page addresses, since the
+ * guest page size may not be 4096 on ARM64.
+ */
+#define HV_HYP_PAGE_SHIFT 12
+#define HV_HYP_PAGE_SIZE (1 << HV_HYP_PAGE_SHIFT)
+#define HV_HYP_PAGE_MASK (~(HV_HYP_PAGE_SIZE - 1))
+
+/*
+ * These Hyper-V registers provide information equivalent to the CPUID
+ * instruction on x86/x64.
+ */
+#define HV_REGISTER_HYPERVISOR_VERSION 0x00000100 /*CPUID 0x40000002 */
+#define HV_REGISTER_PRIVILEGES_AND_FEATURES 0x00000200 /*CPUID 0x40000003 */
+#define HV_REGISTER_FEATURES 0x00000201 /*CPUID 0x40000004 */
+#define HV_REGISTER_IMPLEMENTATION_LIMITS 0x00000202 /*CPUID 0x40000005 */
+#define HV_ARM64_REGISTER_INTERFACE_VERSION 0x00090006 /*CPUID 0x40000001 */
+
+/*
+ * Feature identification. HvRegisterPrivilegesAndFeaturesInfo returns a
+ * 128-bit value with flags indicating which features are available to the
+ * partition based upon the current partition privileges. The 128-bit
+ * value is broken up with different portions stored in different 32-bit
+ * fields in the ms_hyperv structure.
+ */
+
+/* Partition Reference Counter available*/
+#define HV_MSR_TIME_REF_COUNT_AVAILABLE BIT(1)
+
+/*
+ * Synthetic Timers available
+ */
+#define HV_MSR_SYNTIMER_AVAILABLE BIT(3)
+
+/* Frequency MSRs available */
+#define HV_FEATURE_FREQUENCY_MSRS_AVAILABLE BIT(8)
+
+/* Reference TSC available */
+#define HV_MSR_REFERENCE_TSC_AVAILABLE BIT(9)
+
+/* Crash MSR available */
+#define HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE BIT(10)
+
+
+/*
+ * This group of flags is in the high order 64-bits of the returned
+ * 128-bit value.
+ */
+
+/* STIMER direct mode is available */
+#define HV_STIMER_DIRECT_MODE_AVAILABLE BIT(19)
+
+/*
+ * Implementation recommendations in register
+ * HvRegisterFeaturesInfo. Indicates which behaviors the hypervisor
+ * recommends the OS implement for optimal performance.
+ */
+
+/*
+ * Recommend not using Auto EOI
+ */
+#define HV_DEPRECATING_AEOI_RECOMMENDED BIT(9)
+
+/*
+ * Synthetic register definitions equivalent to MSRs on x86/x64
+ */
+#define HV_REGISTER_CRASH_P0 0x00000210
+#define HV_REGISTER_CRASH_P1 0x00000211
+#define HV_REGISTER_CRASH_P2 0x00000212
+#define HV_REGISTER_CRASH_P3 0x00000213
+#define HV_REGISTER_CRASH_P4 0x00000214
+#define HV_REGISTER_CRASH_CTL 0x00000215
+
+#define HV_REGISTER_GUEST_OSID 0x00090002
+#define HV_REGISTER_VPINDEX 0x00090003
+#define HV_REGISTER_TIME_REFCOUNT 0x00090004
+#define HV_REGISTER_REFERENCE_TSC 0x00090017
+
+#define HV_REGISTER_SINT0 0x000A0000
+#define HV_REGISTER_SINT1 0x000A0001
+#define HV_REGISTER_SINT2 0x000A0002
+#define HV_REGISTER_SINT3 0x000A0003
+#define HV_REGISTER_SINT4 0x000A0004
+#define HV_REGISTER_SINT5 0x000A0005
+#define HV_REGISTER_SINT6 0x000A0006
+#define HV_REGISTER_SINT7 0x000A0007
+#define HV_REGISTER_SINT8 0x000A0008
+#define HV_REGISTER_SINT9 0x000A0009
+#define HV_REGISTER_SINT10 0x000A000A
+#define HV_REGISTER_SINT11 0x000A000B
+#define HV_REGISTER_SINT12 0x000A000C
+#define HV_REGISTER_SINT13 0x000A000D
+#define HV_REGISTER_SINT14 0x000A000E
+#define HV_REGISTER_SINT15 0x000A000F
+#define HV_REGISTER_SCONTROL 0x000A0010
+#define HV_REGISTER_SVERSION 0x000A0011
+#define HV_REGISTER_SIFP 0x000A0012
+#define HV_REGISTER_SIPP 0x000A0013
+#define HV_REGISTER_EOM 0x000A0014
+#define HV_REGISTER_SIRBP 0x000A0015
+
+#define HV_REGISTER_STIMER0_CONFIG 0x000B0000
+#define HV_REGISTER_STIMER0_COUNT 0x000B0001
+#define HV_REGISTER_STIMER1_CONFIG 0x000B0002
+#define HV_REGISTER_STIMER1_COUNT 0x000B0003
+#define HV_REGISTER_STIMER2_CONFIG 0x000B0004
+#define HV_REGISTER_STIMER2_COUNT 0x000B0005
+#define HV_REGISTER_STIMER3_CONFIG 0x000B0006
+#define HV_REGISTER_STIMER3_COUNT 0x000B0007
+
+/*
+ * Crash notification flags.
+ */
+#define HV_CRASH_CTL_CRASH_NOTIFY_MSG BIT_ULL(62)
+#define HV_CRASH_CTL_CRASH_NOTIFY BIT_ULL(63)
+
+/*
+ * The guest OS needs to register the guest ID with the hypervisor.
+ * The guest ID is a 64 bit entity and the structure of this ID is
+ * specified in the Hyper-V TLFS.
+ */
+#define HV_LINUX_VENDOR_ID 0x8100
+
+/* Declare the various hypercall operations. */
+#define HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE 0x0002
+#define HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST 0x0003
+#define HVCALL_NOTIFY_LONG_SPIN_WAIT 0x0008
+#define HVCALL_SEND_IPI 0x000b
+#define HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE_EX 0x0013
+#define HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX 0x0014
+#define HVCALL_SEND_IPI_EX 0x0015
+#define HVCALL_GET_VP_REGISTERS 0x0050
+#define HVCALL_SET_VP_REGISTERS 0x0051
+#define HVCALL_POST_MESSAGE 0x005c
+#define HVCALL_SIGNAL_EVENT 0x005d
+#define HVCALL_RETARGET_INTERRUPT 0x007e
+#define HVCALL_START_VIRTUAL_PROCESSOR 0x0099
+
+/* Declare standard hypercall field values. */
+#define HV_PARTITION_ID_SELF ((u64)-1)
+#define HV_VP_INDEX_SELF ((u32)-2)
+
+#define HV_HYPERCALL_FAST_BIT BIT(16)
+#define HV_HYPERCALL_REP_COUNT_1 BIT_ULL(32)
+#define HV_HYPERCALL_RESULT_MASK GENMASK_ULL(15, 0)
+
+/* Define the hypercall status result */
+
+union hv_hypercall_status {
+ u64 as_uint64;
+ struct {
+ u16 status;
+ u16 reserved;
+ u16 reps_completed; /* Low 12 bits */
+ u16 reserved2;
+ };
+};
+
+/* hypercall status code */
+#define HV_STATUS_SUCCESS 0
+#define HV_STATUS_INVALID_HYPERCALL_CODE 2
+#define HV_STATUS_INVALID_HYPERCALL_INPUT 3
+#define HV_STATUS_INVALID_ALIGNMENT 4
+#define HV_STATUS_INSUFFICIENT_MEMORY 11
+#define HV_STATUS_INVALID_CONNECTION_ID 18
+#define HV_STATUS_INSUFFICIENT_BUFFERS 19
+
+/* Define output layout for Get VP Register hypercall */
+struct hv_get_vp_register_output {
+ u64 registervaluelow;
+ u64 registervaluehigh;
+};
+
+#define HV_FLUSH_ALL_PROCESSORS BIT(0)
+#define HV_FLUSH_ALL_VIRTUAL_ADDRESS_SPACES BIT(1)
+#define HV_FLUSH_NON_GLOBAL_MAPPINGS_ONLY BIT(2)
+#define HV_FLUSH_USE_EXTENDED_RANGE_FORMAT BIT(3)
+
+enum HV_GENERIC_SET_FORMAT {
+ HV_GENERIC_SET_SPARSE_4K,
+ HV_GENERIC_SET_ALL,
+};
+
+/*
+ * The Hyper-V TimeRefCount register and the TSC
+ * page provide a guest VM clock with 100ns tick rate
+ */
+#define HV_CLOCK_HZ (NSEC_PER_SEC/100)
+
+/*
+ * The fields in this structure are set by Hyper-V and read
+ * by the Linux guest. They should be accessed with READ_ONCE()
+ * so the compiler doesn't optimize in a way that will cause
+ * problems. The union pads the size out to the page size
+ * used in communication with Hyper-V.
+ */
+struct ms_hyperv_tsc_page {
+ union {
+ struct {
+ u32 tsc_sequence;
+ u32 reserved1;
+ u64 tsc_scale;
+ s64 tsc_offset;
+ } __packed;
+ u8 reserved2[HV_HYP_PAGE_SIZE];
+ };
+};
+
+/* Define the number of synthetic interrupt sources. */
+#define HV_SYNIC_SINT_COUNT (16)
+/* Define the expected SynIC version. */
+#define HV_SYNIC_VERSION_1 (0x1)
+
+#define HV_SYNIC_CONTROL_ENABLE (1ULL << 0)
+#define HV_SYNIC_SIMP_ENABLE (1ULL << 0)
+#define HV_SYNIC_SIEFP_ENABLE (1ULL << 0)
+#define HV_SYNIC_SINT_MASKED (1ULL << 16)
+#define HV_SYNIC_SINT_AUTO_EOI (1ULL << 17)
+#define HV_SYNIC_SINT_VECTOR_MASK (0xFF)
+
+#define HV_SYNIC_STIMER_COUNT (4)
+
+/* Define synthetic interrupt controller message constants. */
+#define HV_MESSAGE_SIZE (256)
+#define HV_MESSAGE_PAYLOAD_BYTE_COUNT (240)
+#define HV_MESSAGE_PAYLOAD_QWORD_COUNT (30)
+
+/* Define hypervisor message types. */
+enum hv_message_type {
+ HVMSG_NONE = 0x00000000,
+
+ /* Memory access messages. */
+ HVMSG_UNMAPPED_GPA = 0x80000000,
+ HVMSG_GPA_INTERCEPT = 0x80000001,
+
+ /* Timer notification messages. */
+ HVMSG_TIMER_EXPIRED = 0x80000010,
+
+ /* Error messages. */
+ HVMSG_INVALID_VP_REGISTER_VALUE = 0x80000020,
+ HVMSG_UNRECOVERABLE_EXCEPTION = 0x80000021,
+ HVMSG_UNSUPPORTED_FEATURE = 0x80000022,
+
+ /* Trace buffer complete messages. */
+ HVMSG_EVENTLOG_BUFFERCOMPLETE = 0x80000040,
+};
+
+/* Define synthetic interrupt controller message flags. */
+union hv_message_flags {
+ __u8 asu8;
+ struct {
+ __u8 msg_pending:1;
+ __u8 reserved:7;
+ } __packed;
+};
+
+/* Define port identifier type. */
+union hv_port_id {
+ __u32 asu32;
+ struct {
+ __u32 id:24;
+ __u32 reserved:8;
+ } __packed u;
+};
+
+/* Define synthetic interrupt controller message header. */
+struct hv_message_header {
+ __u32 message_type;
+ __u8 payload_size;
+ union hv_message_flags message_flags;
+ __u8 reserved[2];
+ union {
+ __u64 sender;
+ union hv_port_id port;
+ };
+} __packed;
+
+/* Define synthetic interrupt controller message format. */
+struct hv_message {
+ struct hv_message_header header;
+ union {
+ __u64 payload[HV_MESSAGE_PAYLOAD_QWORD_COUNT];
+ } u;
+} __packed;
+
+/* Define the synthetic interrupt message page layout. */
+struct hv_message_page {
+ struct hv_message sint_message[HV_SYNIC_SINT_COUNT];
+} __packed;
+
+/* Define timer message payload structure. */
+struct hv_timer_message_payload {
+ __u32 timer_index;
+ __u32 reserved;
+ __u64 expiration_time; /* When the timer expired */
+ __u64 delivery_time; /* When the message was delivered */
+} __packed;
+
+#define HV_STIMER_ENABLE (1ULL << 0)
+#define HV_STIMER_PERIODIC (1ULL << 1)
+#define HV_STIMER_LAZY (1ULL << 2)
+#define HV_STIMER_AUTOENABLE (1ULL << 3)
+#define HV_STIMER_SINT(config) (__u8)(((config) >> 16) & 0x0F)
+
+
+/* Define synthetic interrupt controller flag constants. */
+#define HV_EVENT_FLAGS_COUNT (256 * 8)
+#define HV_EVENT_FLAGS_LONG_COUNT (256 / sizeof(unsigned long))
+
+/*
+ * Timer configuration register.
+ */
+union hv_stimer_config {
+ u64 as_uint64;
+ struct {
+ u64 enable:1;
+ u64 periodic:1;
+ u64 lazy:1;
+ u64 auto_enable:1;
+ u64 apic_vector:8;
+ u64 direct_mode:1;
+ u64 reserved_z0:3;
+ u64 sintx:4;
+ u64 reserved_z1:44;
+ } __packed;
+};
+
+
+/* Define the synthetic interrupt controller event flags format. */
+union hv_synic_event_flags {
+ unsigned long flags[HV_EVENT_FLAGS_LONG_COUNT];
+};
+
+/* Define SynIC control register. */
+union hv_synic_scontrol {
+ u64 as_uint64;
+ struct {
+ u64 enable:1;
+ u64 reserved:63;
+ } __packed;
+};
+
+/* Define synthetic interrupt source. */
+union hv_synic_sint {
+ u64 as_uint64;
+ struct {
+ u64 vector:8;
+ u64 reserved1:8;
+ u64 masked:1;
+ u64 auto_eoi:1;
+ u64 reserved2:46;
+ } __packed;
+};
+
+/* Define the format of the SIMP register */
+union hv_synic_simp {
+ u64 as_uint64;
+ struct {
+ u64 simp_enabled:1;
+ u64 preserved:11;
+ u64 base_simp_gpa:52;
+ } __packed;
+};
+
+/* Define the format of the SIEFP register */
+union hv_synic_siefp {
+ u64 as_uint64;
+ struct {
+ u64 siefp_enabled:1;
+ u64 preserved:11;
+ u64 base_siefp_gpa:52;
+ } __packed;
+};
+
+struct hv_vpset {
+ u64 format;
+ u64 valid_bank_mask;
+ u64 bank_contents[];
+} __packed;
+
+
+#endif
new file mode 100644
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * Linux-specific definitions for managing interactions with Microsoft's
+ * Hyper-V hypervisor. The definitions in this file are specific to
+ * the ARM64 architecture. See include/asm-generic/mshyperv.h for
+ * definitions are that architecture independent.
+ *
+ * Definitions that are specified in the Hyper-V Top Level Functional
+ * Spec (TLFS) should not go in this file, but should instead go in
+ * hyperv-tlfs.h.
+ *
+ * Copyright (C) 2019, Microsoft, Inc.
+ *
+ * Author : Michael Kelley <mikelley@microsoft.com>
+ */
+
+#ifndef _ASM_MSHYPERV_H
+#define _ASM_MSHYPERV_H
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/clocksource.h>
+#include <linux/irq.h>
+#include <linux/irqdesc.h>
+#include <asm/hyperv-tlfs.h>
+
+/*
+ * Define the IRQ numbers/vectors used by Hyper-V VMbus interrupts
+ * and by STIMER0 Direct Mode interrupts. Hyper-V should be supplying
+ * these values through ACPI, but there are no other interrupting
+ * devices in a Hyper-V VM on ARM64, so it's OK to hard code for now.
+ * The "CALLBACK_VECTOR" terminology is a left-over from the x86/x64
+ * world that is used in architecture independent Hyper-V code.
+ */
+#define HYPERVISOR_CALLBACK_VECTOR 16
+#define HV_STIMER0_IRQNR 17
+
+extern u64 hv_do_hvc(u64 control, ...);
+extern u64 hv_do_hvc_fast_get(u64 control, u64 input1, u64 input2, u64 input3,
+ struct hv_get_vp_register_output *output);
+
+/*
+ * Declare calls to get and set Hyper-V VP register values on ARM64, which
+ * requires a hypercall.
+ */
+extern void hv_set_vpreg(u32 reg, u64 value);
+extern u64 hv_get_vpreg(u32 reg);
+extern void hv_get_vpreg_128(u32 reg, struct hv_get_vp_register_output *result);
+
+/*
+ * Use the Hyper-V provided stimer0 as the timer that is made
+ * available to the architecture independent Hyper-V drivers.
+ */
+#define hv_init_timer(timer, tick) \
+ hv_set_vpreg(HV_REGISTER_STIMER0_COUNT + (2*timer), tick)
+#define hv_init_timer_config(timer, val) \
+ hv_set_vpreg(HV_REGISTER_STIMER0_CONFIG + (2*timer), val)
+#define hv_get_current_tick(tick) \
+ (tick = hv_get_vpreg(HV_REGISTER_TIME_REFCOUNT))
+
+#define hv_get_simp(val) (val = hv_get_vpreg(HV_REGISTER_SIPP))
+#define hv_set_simp(val) hv_set_vpreg(HV_REGISTER_SIPP, val)
+
+#define hv_get_siefp(val) (val = hv_get_vpreg(HV_REGISTER_SIFP))
+#define hv_set_siefp(val) hv_set_vpreg(HV_REGISTER_SIFP, val)
+
+#define hv_get_synic_state(val) (val = hv_get_vpreg(HV_REGISTER_SCONTROL))
+#define hv_set_synic_state(val) hv_set_vpreg(HV_REGISTER_SCONTROL, val)
+
+#define hv_get_vp_index(index) (index = hv_get_vpreg(HV_REGISTER_VPINDEX))
+
+#define hv_signal_eom() hv_set_vpreg(HV_REGISTER_EOM, 0)
+
+/*
+ * Hyper-V SINT registers are numbered sequentially, so we can just
+ * add the SINT number to the register number of SINT0
+ */
+#define hv_get_synint_state(sint_num, val) \
+ (val = hv_get_vpreg(HV_REGISTER_SINT0 + sint_num))
+#define hv_set_synint_state(sint_num, val) \
+ hv_set_vpreg(HV_REGISTER_SINT0 + sint_num, val)
+
+#define hv_get_crash_ctl(val) \
+ (val = hv_get_vpreg(HV_REGISTER_CRASH_CTL))
+#define hv_get_time_ref_count(val) \
+ (val = hv_get_vpreg(HV_REGISTER_TIME_REFCOUNT))
+#define hv_get_reference_tsc(val) \
+ (val = hv_get_vpreg(HV_REGISTER_REFERENCE_TSC))
+#define hv_set_reference_tsc(val) \
+ hv_set_vpreg(HV_REGISTER_REFERENCE_TSC, val)
+#define hv_set_clocksource_vdso(val) \
+ ((val).archdata.vdso_direct = false)
+
+#if IS_ENABLED(CONFIG_HYPERV)
+#define hv_enable_stimer0_percpu_irq(irq) enable_percpu_irq(irq, 0)
+#define hv_disable_stimer0_percpu_irq(irq) disable_percpu_irq(irq)
+#endif
+
+/* ARM64 specific code to read the hardware clock */
+#define hv_get_raw_timer() arch_timer_read_counter()
+
+#include <asm-generic/mshyperv.h>
+
+#endif
hyperv-tlfs.h defines Hyper-V interfaces from the Hyper-V Top Level Functional Spec (TLFS). The TLFS is distinctly oriented to x86/x64, and Hyper-V has not separated out the architecture-dependent parts into x86/x64 vs. ARM64. So hyperv-tlfs.h includes information for ARM64 that is not yet formally published. The TLFS is available here: docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs mshyperv.h defines Linux-specific structures and routines for interacting with Hyper-V on ARM64, and #includes the architecture- independent part of mshyperv.h in include/asm-generic. Signed-off-by: Michael Kelley <mikelley@microsoft.com> --- MAINTAINERS | 2 + arch/arm64/include/asm/hyperv-tlfs.h | 408 +++++++++++++++++++++++++++++++++++ arch/arm64/include/asm/mshyperv.h | 105 +++++++++ 3 files changed, 515 insertions(+) create mode 100644 arch/arm64/include/asm/hyperv-tlfs.h create mode 100644 arch/arm64/include/asm/mshyperv.h