diff mbox series

[V2,2/3] arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk

Message ID 1570496145-11053-2-git-send-email-Anson.Huang@nxp.com (mailing list archive)
State Mainlined
Commit a6a40d5688f2264afd40574ee1c92e5f824b34ba
Headers show
Series [V2,1/3] arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk | expand

Commit Message

Anson Huang Oct. 8, 2019, 12:55 a.m. UTC 
On i.MX8MM, usdhc's ipg clock is from IMX8MM_CLK_IPG_ROOT,
assign it explicitly instead of using IMX8MM_CLK_DUMMY.

Fixes: a05ea40eb384 ("arm64: dts: imx: Add i.mx8mm dtsi support")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Changes since V1:
	- Add fixes tag.
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 7c4dcce..8aafad2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -694,7 +694,7 @@ 
 				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_DUMMY>,
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
 					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MM_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -710,7 +710,7 @@ 
 				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_DUMMY>,
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
 					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MM_CLK_USDHC2_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -724,7 +724,7 @@ 
 				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_DUMMY>,
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
 					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MM_CLK_USDHC3_ROOT>;
 				clock-names = "ipg", "ahb", "per";