diff mbox series

[2/2] ARM: dts: stm32: Add DAC support to stm32mp157c-ed1

Message ID 1570630372-24579-3-git-send-email-fabrice.gasnier@st.com (mailing list archive)
State Mainlined
Commit 4951d99551661eef9a74e35e39c0424e3d2494a5
Headers show
Series Add support for DAC on stm32mp157c-ed1 | expand

Commit Message

Fabrice Gasnier Oct. 9, 2019, 2:12 p.m. UTC 
stm32mp157c-ed1 board has digital-to-analog converter signals routed
to JP11 and JP10 jumpers (e.g. PA4/PA5).
It's easier then to configure them both. But keep them disabled by default,
so the pins are kept in their initial state to lower power consumption.
This way they can also be used as GPIO.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
 arch/arm/boot/dts/stm32mp157c-ed1.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index 1d426ea..2b40ad9 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -104,6 +104,19 @@ 
 	};
 };
 
+&dac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
+	vref-supply = <&vdda>;
+	status = "disabled";
+	dac1: dac@1 {
+		status = "okay";
+	};
+	dac2: dac@2 {
+		status = "okay";
+	};
+};
+
 &dts {
 	status = "okay";
 };