diff mbox series

[V4,net-next,3/7] dt-bindings: net: bcmgenet: Add BCM2711 support

Message ID 1573455341-22813-4-git-send-email-wahrenst@gmx.net (mailing list archive)
State New, archived
Headers show
Series ARM: Enable GENET support for RPi 4 | expand

Commit Message

Stefan Wahren Nov. 11, 2019, 6:55 a.m. UTC 
The BCM2711 has some modifications to the GENET v5. So add this SoC
specific compatible.

Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 Documentation/devicetree/bindings/net/brcm,bcmgenet.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--
2.7.4
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
index 3956af1..33a0d67 100644
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
@@ -2,7 +2,7 @@ 

 Required properties:
 - compatible: should contain one of "brcm,genet-v1", "brcm,genet-v2",
-  "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5".
+  "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5", "brcm,bcm2711-genet-v5".
 - reg: address and length of the register set for the device
 - interrupts and/or interrupts-extended: must be two cells, the first cell
   is the general purpose interrupt line, while the second cell is the