diff mbox series

[V4,net-next,6/7] net: bcmgenet: Add RGMII_RXID support

Message ID 1573455341-22813-7-git-send-email-wahrenst@gmx.net (mailing list archive)
State New, archived
Headers show
Series ARM: Enable GENET support for RPi 4 | expand

Commit Message

Stefan Wahren Nov. 11, 2019, 6:55 a.m. UTC 
This adds the missing support for the PHY mode RGMII_RXID.
It's necessary for the Raspberry Pi 4.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/ethernet/broadcom/genet/bcmmii.c | 5 +++++
 1 file changed, 5 insertions(+)

--
2.7.4
diff mbox series

Patch

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 611a6c0..80d2f87 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -273,6 +273,11 @@  int bcmgenet_mii_config(struct net_device *dev, bool init)
 		phy_name = "external RGMII (TX delay)";
 		port_ctrl = PORT_MODE_EXT_GPHY;
 		break;
+
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+		phy_name = "external RGMII (RX delay)";
+		port_ctrl = PORT_MODE_EXT_GPHY;
+		break;
 	default:
 		dev_err(kdev, "unknown phy mode: %d\n", priv->phy_interface);
 		return -EINVAL;