Message ID | 1579795970-22319-2-git-send-email-alain.volmat@st.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | i2c: i2c-stm32f7: enhance FastModePlus support | expand |
Hello Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Thanks On 1/23/20 5:12 PM, Alain Volmat wrote: > Defer the initial enabling of the Fast Mode Plus bits after the > stm32f7_i2c_setup_timing call in probe function in order to avoid > enabling them if speed is downgraded. > Clear & restore the Fast Mode Plus bits in the suspend/resume > handlers of the driver. > > Signed-off-by: Alain Volmat <alain.volmat@st.com> > --- > drivers/i2c/busses/i2c-stm32f7.c | 48 +++++++++++++++++++++++++++++++++------- > 1 file changed, 40 insertions(+), 8 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c > index 844a22d64aa8..1a3b3fa582ff 100644 > --- a/drivers/i2c/busses/i2c-stm32f7.c > +++ b/drivers/i2c/busses/i2c-stm32f7.c > @@ -303,6 +303,8 @@ struct stm32f7_i2c_msg { > * @dma: dma data > * @use_dma: boolean to know if dma is used in the current transfer > * @regmap: holds SYSCFG phandle for Fast Mode Plus bits > + * @regmap_reg: register address for setting Fast Mode Plus bits > + * @regmap_mask: mask for Fast Mode Plus bits in set register > * @wakeup_src: boolean to know if the device is a wakeup source > */ > struct stm32f7_i2c_dev { > @@ -326,6 +328,8 @@ struct stm32f7_i2c_dev { > struct stm32_i2c_dma *dma; > bool use_dma; > struct regmap *regmap; > + u32 regmap_reg; > + u32 regmap_mask; > bool wakeup_src; > }; > > @@ -1815,12 +1819,25 @@ static int stm32f7_i2c_unreg_slave(struct i2c_client *slave) > return 0; > } > > +static int stm32f7_i2c_write_fm_plus_bits(struct stm32f7_i2c_dev *i2c_dev, > + bool enable) > +{ > + if (i2c_dev->speed != STM32_I2C_SPEED_FAST_PLUS || > + IS_ERR_OR_NULL(i2c_dev->regmap)) { > + /* Optional */ > + return 0; > + } > + > + return regmap_update_bits(i2c_dev->regmap, i2c_dev->regmap_reg, > + i2c_dev->regmap_mask, > + enable ? i2c_dev->regmap_mask : 0); > +} > + > static int stm32f7_i2c_setup_fm_plus_bits(struct platform_device *pdev, > struct stm32f7_i2c_dev *i2c_dev) > { > struct device_node *np = pdev->dev.of_node; > int ret; > - u32 reg, mask; > > i2c_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg-fmp"); > if (IS_ERR(i2c_dev->regmap)) { > @@ -1828,15 +1845,17 @@ static int stm32f7_i2c_setup_fm_plus_bits(struct platform_device *pdev, > return 0; > } > > - ret = of_property_read_u32_index(np, "st,syscfg-fmp", 1, ®); > + ret = of_property_read_u32_index(np, "st,syscfg-fmp", 1, > + &i2c_dev->regmap_reg); > if (ret) > return ret; > > - ret = of_property_read_u32_index(np, "st,syscfg-fmp", 2, &mask); > + ret = of_property_read_u32_index(np, "st,syscfg-fmp", 2, > + &i2c_dev->regmap_mask); > if (ret) > return ret; > > - return regmap_update_bits(i2c_dev->regmap, reg, mask, mask); > + return 0; > } > > static u32 stm32f7_i2c_func(struct i2c_adapter *adap) > @@ -1914,9 +1933,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) > &clk_rate); > if (!ret && clk_rate >= 1000000) { > i2c_dev->speed = STM32_I2C_SPEED_FAST_PLUS; > - ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev); > - if (ret) > - goto clk_free; > } else if (!ret && clk_rate >= 400000) { > i2c_dev->speed = STM32_I2C_SPEED_FAST; > } else if (!ret && clk_rate >= 100000) { > @@ -1976,6 +1992,15 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) > if (ret) > goto clk_free; > > + if (i2c_dev->speed == STM32_I2C_SPEED_FAST_PLUS) { > + ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev); > + if (ret) > + goto clk_free; > + ret = stm32f7_i2c_write_fm_plus_bits(i2c_dev, 1); > + if (ret) > + goto clk_free; > + } > + > adap = &i2c_dev->adap; > i2c_set_adapdata(adap, i2c_dev); > snprintf(adap->name, sizeof(adap->name), "STM32F7 I2C(%pa)", > @@ -2000,7 +2025,7 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) > if (ret != -EPROBE_DEFER) > dev_err(&pdev->dev, > "Failed to request dma error %i\n", ret); > - goto clk_free; > + goto fmp_clear; > } > > if (i2c_dev->wakeup_src) { > @@ -2054,6 +2079,9 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) > i2c_dev->dma = NULL; > } > > +fmp_clear: > + stm32f7_i2c_write_fm_plus_bits(i2c_dev, 0); > + > clk_free: > clk_disable_unprepare(i2c_dev->clk); > > @@ -2086,6 +2114,8 @@ static int stm32f7_i2c_remove(struct platform_device *pdev) > i2c_dev->dma = NULL; > } > > + stm32f7_i2c_write_fm_plus_bits(i2c_dev, 0); > + > clk_disable_unprepare(i2c_dev->clk); > > return 0; > @@ -2133,6 +2163,7 @@ stm32f7_i2c_regs_backup(struct stm32f7_i2c_dev *i2c_dev) > backup_regs->oar2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR2); > backup_regs->pecr = readl_relaxed(i2c_dev->base + STM32F7_I2C_PECR); > backup_regs->tmgr = readl_relaxed(i2c_dev->base + STM32F7_I2C_TIMINGR); > + stm32f7_i2c_write_fm_plus_bits(i2c_dev, 0); > > pm_runtime_put_sync(i2c_dev->dev); > > @@ -2165,6 +2196,7 @@ stm32f7_i2c_regs_restore(struct stm32f7_i2c_dev *i2c_dev) > writel_relaxed(backup_regs->oar1, i2c_dev->base + STM32F7_I2C_OAR1); > writel_relaxed(backup_regs->oar2, i2c_dev->base + STM32F7_I2C_OAR2); > writel_relaxed(backup_regs->pecr, i2c_dev->base + STM32F7_I2C_PECR); > + stm32f7_i2c_write_fm_plus_bits(i2c_dev, 1); > > pm_runtime_put_sync(i2c_dev->dev); > >
Hi Alain, thanks for the patch. A few comments: > @@ -303,6 +303,8 @@ struct stm32f7_i2c_msg { > * @dma: dma data > * @use_dma: boolean to know if dma is used in the current transfer > * @regmap: holds SYSCFG phandle for Fast Mode Plus bits > + * @regmap_reg: register address for setting Fast Mode Plus bits > + * @regmap_mask: mask for Fast Mode Plus bits in set register > * @wakeup_src: boolean to know if the device is a wakeup source > */ > struct stm32f7_i2c_dev { > @@ -326,6 +328,8 @@ struct stm32f7_i2c_dev { > struct stm32_i2c_dma *dma; > bool use_dma; > struct regmap *regmap; > + u32 regmap_reg; > + u32 regmap_mask; Is this really a descriptive naming? From looking at the code, 'syscfg_reg' or 'fmp_reg' sound more suitable to me? > +{ > + if (i2c_dev->speed != STM32_I2C_SPEED_FAST_PLUS || > + IS_ERR_OR_NULL(i2c_dev->regmap)) { > + /* Optional */ > + return 0; > + } No brackets needed here. > - ret = of_property_read_u32_index(np, "st,syscfg-fmp", 2, &mask); > + ret = of_property_read_u32_index(np, "st,syscfg-fmp", 2, > + &i2c_dev->regmap_mask); > if (ret) > return ret; > > - return regmap_update_bits(i2c_dev->regmap, reg, mask, mask); > + return 0; Can be shortened now to return of_property_read_u32_index(...); > + ret = stm32f7_i2c_write_fm_plus_bits(i2c_dev, 1); The type of the last parameter is bool, so using 'true/false' instead of '1/0' is a tad more readable, I think. Regards, Wolfram
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index 844a22d64aa8..1a3b3fa582ff 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -303,6 +303,8 @@ struct stm32f7_i2c_msg { * @dma: dma data * @use_dma: boolean to know if dma is used in the current transfer * @regmap: holds SYSCFG phandle for Fast Mode Plus bits + * @regmap_reg: register address for setting Fast Mode Plus bits + * @regmap_mask: mask for Fast Mode Plus bits in set register * @wakeup_src: boolean to know if the device is a wakeup source */ struct stm32f7_i2c_dev { @@ -326,6 +328,8 @@ struct stm32f7_i2c_dev { struct stm32_i2c_dma *dma; bool use_dma; struct regmap *regmap; + u32 regmap_reg; + u32 regmap_mask; bool wakeup_src; }; @@ -1815,12 +1819,25 @@ static int stm32f7_i2c_unreg_slave(struct i2c_client *slave) return 0; } +static int stm32f7_i2c_write_fm_plus_bits(struct stm32f7_i2c_dev *i2c_dev, + bool enable) +{ + if (i2c_dev->speed != STM32_I2C_SPEED_FAST_PLUS || + IS_ERR_OR_NULL(i2c_dev->regmap)) { + /* Optional */ + return 0; + } + + return regmap_update_bits(i2c_dev->regmap, i2c_dev->regmap_reg, + i2c_dev->regmap_mask, + enable ? i2c_dev->regmap_mask : 0); +} + static int stm32f7_i2c_setup_fm_plus_bits(struct platform_device *pdev, struct stm32f7_i2c_dev *i2c_dev) { struct device_node *np = pdev->dev.of_node; int ret; - u32 reg, mask; i2c_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg-fmp"); if (IS_ERR(i2c_dev->regmap)) { @@ -1828,15 +1845,17 @@ static int stm32f7_i2c_setup_fm_plus_bits(struct platform_device *pdev, return 0; } - ret = of_property_read_u32_index(np, "st,syscfg-fmp", 1, ®); + ret = of_property_read_u32_index(np, "st,syscfg-fmp", 1, + &i2c_dev->regmap_reg); if (ret) return ret; - ret = of_property_read_u32_index(np, "st,syscfg-fmp", 2, &mask); + ret = of_property_read_u32_index(np, "st,syscfg-fmp", 2, + &i2c_dev->regmap_mask); if (ret) return ret; - return regmap_update_bits(i2c_dev->regmap, reg, mask, mask); + return 0; } static u32 stm32f7_i2c_func(struct i2c_adapter *adap) @@ -1914,9 +1933,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) &clk_rate); if (!ret && clk_rate >= 1000000) { i2c_dev->speed = STM32_I2C_SPEED_FAST_PLUS; - ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev); - if (ret) - goto clk_free; } else if (!ret && clk_rate >= 400000) { i2c_dev->speed = STM32_I2C_SPEED_FAST; } else if (!ret && clk_rate >= 100000) { @@ -1976,6 +1992,15 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) if (ret) goto clk_free; + if (i2c_dev->speed == STM32_I2C_SPEED_FAST_PLUS) { + ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev); + if (ret) + goto clk_free; + ret = stm32f7_i2c_write_fm_plus_bits(i2c_dev, 1); + if (ret) + goto clk_free; + } + adap = &i2c_dev->adap; i2c_set_adapdata(adap, i2c_dev); snprintf(adap->name, sizeof(adap->name), "STM32F7 I2C(%pa)", @@ -2000,7 +2025,7 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) if (ret != -EPROBE_DEFER) dev_err(&pdev->dev, "Failed to request dma error %i\n", ret); - goto clk_free; + goto fmp_clear; } if (i2c_dev->wakeup_src) { @@ -2054,6 +2079,9 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) i2c_dev->dma = NULL; } +fmp_clear: + stm32f7_i2c_write_fm_plus_bits(i2c_dev, 0); + clk_free: clk_disable_unprepare(i2c_dev->clk); @@ -2086,6 +2114,8 @@ static int stm32f7_i2c_remove(struct platform_device *pdev) i2c_dev->dma = NULL; } + stm32f7_i2c_write_fm_plus_bits(i2c_dev, 0); + clk_disable_unprepare(i2c_dev->clk); return 0; @@ -2133,6 +2163,7 @@ stm32f7_i2c_regs_backup(struct stm32f7_i2c_dev *i2c_dev) backup_regs->oar2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR2); backup_regs->pecr = readl_relaxed(i2c_dev->base + STM32F7_I2C_PECR); backup_regs->tmgr = readl_relaxed(i2c_dev->base + STM32F7_I2C_TIMINGR); + stm32f7_i2c_write_fm_plus_bits(i2c_dev, 0); pm_runtime_put_sync(i2c_dev->dev); @@ -2165,6 +2196,7 @@ stm32f7_i2c_regs_restore(struct stm32f7_i2c_dev *i2c_dev) writel_relaxed(backup_regs->oar1, i2c_dev->base + STM32F7_I2C_OAR1); writel_relaxed(backup_regs->oar2, i2c_dev->base + STM32F7_I2C_OAR2); writel_relaxed(backup_regs->pecr, i2c_dev->base + STM32F7_I2C_PECR); + stm32f7_i2c_write_fm_plus_bits(i2c_dev, 1); pm_runtime_put_sync(i2c_dev->dev);
Defer the initial enabling of the Fast Mode Plus bits after the stm32f7_i2c_setup_timing call in probe function in order to avoid enabling them if speed is downgraded. Clear & restore the Fast Mode Plus bits in the suspend/resume handlers of the driver. Signed-off-by: Alain Volmat <alain.volmat@st.com> --- drivers/i2c/busses/i2c-stm32f7.c | 48 +++++++++++++++++++++++++++++++++------- 1 file changed, 40 insertions(+), 8 deletions(-)