@@ -37,6 +37,7 @@
#define MODULE_NAME "pinctrl-bcm2835"
#define BCM2835_NUM_GPIOS 54
+#define BCM2711_NUM_GPIOS 58
#define BCM2835_NUM_BANKS 2
#define BCM2835_NUM_IRQS 3
@@ -78,7 +79,7 @@ struct bcm2835_pinctrl {
/* note: locking assumes each bank will have its own unsigned long */
unsigned long enabled_irq_map[BCM2835_NUM_BANKS];
- unsigned int irq_type[BCM2835_NUM_GPIOS];
+ unsigned int irq_type[BCM2711_NUM_GPIOS];
struct pinctrl_dev *pctl_dev;
struct gpio_chip gpio_chip;
@@ -145,6 +146,10 @@ static struct pinctrl_pin_desc bcm2835_gpio_pins[] = {
BCM2835_GPIO_PIN(51),
BCM2835_GPIO_PIN(52),
BCM2835_GPIO_PIN(53),
+ BCM2835_GPIO_PIN(54),
+ BCM2835_GPIO_PIN(55),
+ BCM2835_GPIO_PIN(56),
+ BCM2835_GPIO_PIN(57),
};
/* one pin per group */
@@ -203,6 +208,10 @@ static const char * const bcm2835_gpio_groups[] = {
"gpio51",
"gpio52",
"gpio53",
+ "gpio54",
+ "gpio55",
+ "gpio56",
+ "gpio57",
};
enum bcm2835_fsel {
@@ -353,6 +362,22 @@ static const struct gpio_chip bcm2835_gpio_chip = {
.can_sleep = false,
};
+static const struct gpio_chip bcm2711_gpio_chip = {
+ .label = "pinctrl-bcm2711",
+ .owner = THIS_MODULE,
+ .request = gpiochip_generic_request,
+ .free = gpiochip_generic_free,
+ .direction_input = bcm2835_gpio_direction_input,
+ .direction_output = bcm2835_gpio_direction_output,
+ .get_direction = bcm2835_gpio_get_direction,
+ .get = bcm2835_gpio_get,
+ .set = bcm2835_gpio_set,
+ .set_config = gpiochip_generic_config,
+ .base = -1,
+ .ngpio = BCM2711_NUM_GPIOS,
+ .can_sleep = false,
+};
+
static void bcm2835_gpio_irq_handle_bank(struct bcm2835_pinctrl *pc,
unsigned int bank, u32 mask)
{
@@ -399,7 +424,7 @@ static void bcm2835_gpio_irq_handler(struct irq_desc *desc)
bcm2835_gpio_irq_handle_bank(pc, 0, 0xf0000000);
bcm2835_gpio_irq_handle_bank(pc, 1, 0x00003fff);
break;
- case 2: /* IRQ2 covers GPIOs 46-53 */
+ case 2: /* IRQ2 covers GPIOs 46-57 */
bcm2835_gpio_irq_handle_bank(pc, 1, 0x003fc000);
break;
}
@@ -618,7 +643,7 @@ static struct irq_chip bcm2835_gpio_irq_chip = {
static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev)
{
- return ARRAY_SIZE(bcm2835_gpio_groups);
+ return BCM2835_NUM_GPIOS;
}
static const char *bcm2835_pctl_get_group_name(struct pinctrl_dev *pctldev,
@@ -776,7 +801,7 @@ static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
err = of_property_read_u32_index(np, "brcm,pins", i, &pin);
if (err)
goto out;
- if (pin >= ARRAY_SIZE(bcm2835_gpio_pins)) {
+ if (pin >= pc->pctl_desc.npins) {
dev_err(pc->dev, "%pOF: invalid brcm,pins value %d\n",
np, pin);
err = -EINVAL;
@@ -852,7 +877,7 @@ static int bcm2835_pmx_get_function_groups(struct pinctrl_dev *pctldev,
{
/* every pin can do every function */
*groups = bcm2835_gpio_groups;
- *num_groups = ARRAY_SIZE(bcm2835_gpio_groups);
+ *num_groups = BCM2835_NUM_GPIOS;
return 0;
}
@@ -1055,7 +1080,7 @@ static const struct pinconf_ops bcm2711_pinconf_ops = {
static const struct pinctrl_desc bcm2835_pinctrl_desc = {
.name = MODULE_NAME,
.pins = bcm2835_gpio_pins,
- .npins = ARRAY_SIZE(bcm2835_gpio_pins),
+ .npins = BCM2835_NUM_GPIOS,
.pctlops = &bcm2835_pctl_ops,
.pmxops = &bcm2835_pmx_ops,
.confops = &bcm2835_pinconf_ops,
@@ -1063,9 +1088,9 @@ static const struct pinctrl_desc bcm2835_pinctrl_desc = {
};
static const struct pinctrl_desc bcm2711_pinctrl_desc = {
- .name = MODULE_NAME,
+ .name = "pinctrl-bcm2711",
.pins = bcm2835_gpio_pins,
- .npins = ARRAY_SIZE(bcm2835_gpio_pins),
+ .npins = BCM2711_NUM_GPIOS,
.pctlops = &bcm2835_pctl_ops,
.pmxops = &bcm2835_pmx_ops,
.confops = &bcm2711_pinconf_ops,
@@ -1077,6 +1102,11 @@ static const struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
.npins = BCM2835_NUM_GPIOS,
};
+static const struct pinctrl_gpio_range bcm2711_pinctrl_gpio_range = {
+ .name = "pinctrl-bcm2711",
+ .npins = BCM2711_NUM_GPIOS,
+};
+
struct bcm_plat_data {
const struct gpio_chip *gpio_chip;
const struct pinctrl_desc *pctl_desc;
@@ -1090,9 +1120,9 @@ static const struct bcm_plat_data bcm2835_plat_data = {
};
static const struct bcm_plat_data bcm2711_plat_data = {
- .gpio_chip = &bcm2835_gpio_chip,
+ .gpio_chip = &bcm2711_gpio_chip,
.pctl_desc = &bcm2711_pinctrl_desc,
- .gpio_range = &bcm2835_pinctrl_gpio_range,
+ .gpio_range = &bcm2711_pinctrl_gpio_range,
};
static const struct of_device_id bcm2835_pinctrl_match[] = {
@@ -1118,8 +1148,8 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
int err, i;
const struct of_device_id *match;
- BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2835_NUM_GPIOS);
- BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2835_NUM_GPIOS);
+ BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2711_NUM_GPIOS);
+ BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2711_NUM_GPIOS);
pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
if (!pc)
The BCM2711 supports 58 GPIOs. So extend pinctrl and GPIOs accordingly. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> --- drivers/pinctrl/bcm/pinctrl-bcm2835.c | 54 +++++++++++++++++++++++++++-------- 1 file changed, 42 insertions(+), 12 deletions(-)