diff mbox series

[V3,RESEND,6/7] ARM: dts: imx6sx-softing-vining-2000: Use new pin names with DCE/DTE for UART pins

Message ID 1581938021-16259-6-git-send-email-Anson.Huang@nxp.com (mailing list archive)
State Mainlined
Commit 924d83c7c7da30a28930218e3fcca37fc285944e
Headers show
Series [V3,RESEND,1/7] ARM: dts: imx6sx: Improve UART pins macro defines | expand

Commit Message

Anson Huang Feb. 17, 2020, 11:13 a.m. UTC
Use new pin names containing DCE/DTE for UART RX/TX/RTS/CTS pins, this
is to distinguish the DCE/DTE functions.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
No change.
---
 arch/arm/boot/dts/imx6sx-softing-vining-2000.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
index 28563f2..61c7e72 100644
--- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
+++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
@@ -384,15 +384,15 @@ 
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
-			MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1
+			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO06__UART2_TX		0x1b0b1
-			MX6SX_PAD_GPIO1_IO07__UART2_RX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX	0x1b0b1
+			MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX	0x1b0b1
 		>;
 	};