| Message ID | 1582002899-21391-1-git-send-email-Anson.Huang@nxp.com (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 50d336b12f345808b2e1f47a08443d3fff93c002 |
| Headers | show |
| Series | arm64: dts: imx8mp-evk: Add GPIO LED support | expand |
On Tue, Feb 18, 2020 at 01:14:59PM +0800, Anson Huang wrote: > i.MX8MP EVK board has a GPIO LED to indicate status, add support for it. > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Applied, thanks.
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 6df3beb..a97a03c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -15,6 +15,18 @@ stdout-path = &uart2; }; + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + status { + label = "yellow:status"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + memory@40000000 { device_type = "memory"; reg = <0x0 0x40000000 0 0xc0000000>, @@ -120,6 +132,12 @@ >; }; + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 + >; + }; + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { fsl,pins = < MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
i.MX8MP EVK board has a GPIO LED to indicate status, add support for it. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> --- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)