| Message ID | 1582985786-2198-1-git-send-email-Anson.Huang@nxp.com (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 5e4a67ff7f698ff1af6ebcd9bec7d8de6711ec57 |
| Headers | show |
| Series | [1/2] arm64: dts: imx8mp-evk: Add i2c3 support | expand |
On Sat, Feb 29, 2020 at 10:16:25PM +0800, Anson Huang wrote: > Enable i2c3 for i.MX8MP EVK board. > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Applied both, thanks.
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index a97a03c..b70c42a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -66,6 +66,13 @@ }; }; +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -138,6 +145,13 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3 + >; + }; + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { fsl,pins = < MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
Enable i2c3 for i.MX8MP EVK board. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> --- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+)