From patchwork Tue Apr 28 06:34:50 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kunihiko Hayashi X-Patchwork-Id: 11513947 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id AC6C414DD for ; Tue, 28 Apr 2020 06:35:45 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 647392051A for ; Tue, 28 Apr 2020 06:35:45 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="MsBBLJlk" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 647392051A Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=socionext.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:MIME-Version:Cc:List-Subscribe: List-Help:List-Post:List-Archive:List-Unsubscribe:List-Id:References: In-Reply-To:Message-Id:Date:Subject:To:From:Reply-To:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:List-Owner; bh=hPhE7Qh+tjttPTuZQahttwWh6loKzwn7eUY7XKAxe7U=; b=MsBBLJlkJmQSVJxAlPqEieAFkL W6VPLaHmpJ6PzXdgKlQj9cdMOMrSxz2nEcvewtJK56q+5AWO0QrfUHhOaNFYnJHnqL5h0t0Mw09Ap 9KcmBLo0vtkBiTDo2a/QBbvRm/RKFUUY4L07qKRW08aMmwkQ2qu5hMksNdI3QbEX9EPNYqLNU26ii KzC7ZW9CZs7jaL3UrFi84901smtVBxBflz3gOjKzfmqIduQ3tgr1sscXQqd1QVWLJ7emZd7V8oYIO Gx6afebKhmvA7DX3lZfxoID47yWaLSsuJyFXdXrMxvnz8fBnifQ+43f7gZrx4reH4CXAQNaKU4Ek3 LVmA8HdA==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1jTJqF-0000tJ-IG; Tue, 28 Apr 2020 06:35:39 +0000 Received: from mx.socionext.com ([202.248.49.38]) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1jTJph-0006sS-1B for linux-arm-kernel@lists.infradead.org; Tue, 28 Apr 2020 06:35:08 +0000 Received: from unknown (HELO kinkan-ex.css.socionext.com) ([172.31.9.52]) by mx.socionext.com with ESMTP; 28 Apr 2020 15:35:04 +0900 Received: from mail.mfilter.local (m-filter-2 [10.213.24.62]) by kinkan-ex.css.socionext.com (Postfix) with ESMTP id 55141180105; Tue, 28 Apr 2020 15:35:04 +0900 (JST) Received: from 172.31.9.51 (172.31.9.51) by m-FILTER with ESMTP; Tue, 28 Apr 2020 15:35:04 +0900 Received: from plum.e01.socionext.com (unknown [10.213.132.32]) by kinkan.css.socionext.com (Postfix) with ESMTP id F1BCC1A01BB; Tue, 28 Apr 2020 15:35:03 +0900 (JST) From: Kunihiko Hayashi To: Kishon Vijay Abraham I , Rob Herring , Masahiro Yamada Subject: [PATCH 3/3] dt-bindings: phy: Convert UniPhier USB3-PHY conroller to json-schema Date: Tue, 28 Apr 2020 15:34:50 +0900 Message-Id: <1588055690-13200-3-git-send-email-hayashi.kunihiko@socionext.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1588055690-13200-1-git-send-email-hayashi.kunihiko@socionext.com> References: <1588055690-13200-1-git-send-email-hayashi.kunihiko@socionext.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200427_233505_541758_10D22E4A X-CRM114-Status: GOOD ( 22.31 ) X-Spam-Score: 0.0 (/) X-Spam-Report: SpamAssassin version 3.4.4 on bombadil.infradead.org summary: Content analysis details: (0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, Kunihiko Hayashi , linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Convert the UniPhier USB3-PHY controller for SS/HS to DT schema format. Signed-off-by: Kunihiko Hayashi --- .../phy/socionext,uniphier-usb3hs-phy.yaml | 104 +++++++++++++++++++++ .../phy/socionext,uniphier-usb3ss-phy.yaml | 97 +++++++++++++++++++ .../bindings/phy/uniphier-usb3-hsphy.txt | 69 -------------- .../bindings/phy/uniphier-usb3-ssphy.txt | 58 ------------ 4 files changed, 201 insertions(+), 127 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt delete mode 100644 Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml new file mode 100644 index 0000000..a92a034 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3hs-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier USB3 High-Speed (HS) PHY + +description: | + This describes the devicetree bindings for PHY interfaces built into + USB3 controller implemented on Socionext UniPhier SoCs. + Although the controller includes High-Speed PHY and Super-Speed PHY, + this describes about High-Speed PHY. + +maintainers: + - Kunihiko Hayashi + +properties: + compatible: + enum: + - socionext,uniphier-pro5-usb3-hsphy + - socionext,uniphier-pxs2-usb3-hsphy + - socionext,uniphier-ld20-usb3-hsphy + - socionext,uniphier-pxs3-usb3-hsphy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + oneOf: + - const: link # for PXs2 + - items: # for PXs3 + - const: link + - const: phy + + resets: + maxItems: 2 + + reset-names: + items: + - const: link + - const: phy + + vbus-supply: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to the regulator for USB VBUS + + nvmem-cells: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Phandles to nvmem cell that contains the trimming data. + Available only for HS-PHY implemented on LD20 and PXs3, and + if unspecified, default value is used. + + nvmem-cell-names: + items: + - const: rterm + - const: sel_t + - const: hs_i + description: + Should be the following names, which correspond to each nvmem-cells. + All of the 3 parameters associated with the above names are + required for each port, if any one is omitted, the trimming data + of the port will not be set at all. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus0>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, <&usb_hs_i0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml new file mode 100644 index 0000000..ed67707 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3ss-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier USB3 Super-Speed (SS) PHY + +description: | + This describes the devicetree bindings for PHY interfaces built into + USB3 controller implemented on Socionext UniPhier SoCs. + Although the controller includes High-Speed PHY and Super-Speed PHY, + this describes about Super-Speed PHY. + +maintainers: + - Kunihiko Hayashi + +properties: + compatible: + enum: + - socionext,uniphier-pro4-usb3-ssphy + - socionext,uniphier-pro5-usb3-ssphy + - socionext,uniphier-pxs2-usb3-ssphy + - socionext,uniphier-ld20-usb3-ssphy + - socionext,uniphier-pxs3-usb3-ssphy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + oneOf: + - items: # for Pro4, Pro5 + - const: gio + - const: link + - items: # for PXs3 with phy-ext + - const: link + - const: phy + - const: phy-ext + - items: # for others + - const: link + - const: phy + + resets: + maxItems: 2 + + reset-names: + oneOf: + - items: # for Pro4,Pro5 + - const: gio + - const: link + - items: # for others + - const: link + - const: phy + + vbus-supply: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to the regulator for USB VBUS + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + - vbus-supply + +additionalProperties: false + +examples: + - | + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-ld20-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt deleted file mode 100644 index 093d4f0..0000000 --- a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt +++ /dev/null @@ -1,69 +0,0 @@ -Socionext UniPhier USB3 High-Speed (HS) PHY - -This describes the devicetree bindings for PHY interfaces built into -USB3 controller implemented on Socionext UniPhier SoCs. -Although the controller includes High-Speed PHY and Super-Speed PHY, -this describes about High-Speed PHY. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-pro5-usb3-hsphy" - for Pro5 SoC - "socionext,uniphier-pxs2-usb3-hsphy" - for PXs2 SoC - "socionext,uniphier-ld20-usb3-hsphy" - for LD20 SoC - "socionext,uniphier-pxs3-usb3-hsphy" - for PXs3 SoC -- reg: Specifies offset and length of the register set for the device. -- #phy-cells: Should be 0. -- clocks: A list of phandles to the clock gate for USB3 glue layer. - According to the clock-names, appropriate clocks are required. -- clock-names: Should contain the following: - "gio", "link" - for Pro5 SoC - "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional. - "phy", "link" - for others -- resets: A list of phandles to the reset control for USB3 glue layer. - According to the reset-names, appropriate resets are required. -- reset-names: Should contain the following: - "gio", "link" - for Pro5 SoC - "phy", "link" - for others - -Optional properties: -- vbus-supply: A phandle to the regulator for USB VBUS. -- nvmem-cells: Phandles to nvmem cell that contains the trimming data. - Available only for HS-PHY implemented on LD20 and PXs3, and - if unspecified, default value is used. -- nvmem-cell-names: Should be the following names, which correspond to - each nvmem-cells. - All of the 3 parameters associated with the following names are - required for each port, if any one is omitted, the trimming data - of the port will not be set at all. - "rterm", "sel_t", "hs_i" - Each cell name for phy parameters - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - - usb-glue@65b00000 { - compatible = "socionext,uniphier-ld20-dwc3-glue", - "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x65b00000 0x400>; - - usb_vbus0: regulator { - ... - }; - - usb_hsphy0: hs-phy@200 { - compatible = "socionext,uniphier-ld20-usb3-hsphy"; - reg = <0x200 0x10>; - #phy-cells = <0>; - clock-names = "link", "phy"; - clocks = <&sys_clk 14>, <&sys_clk 16>; - reset-names = "link", "phy"; - resets = <&sys_rst 14>, <&sys_rst 16>; - vbus-supply = <&usb_vbus0>; - nvmem-cell-names = "rterm", "sel_t", "hs_i"; - nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, - <&usb_hs_i0>; - }; - ... - }; diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt deleted file mode 100644 index 9df2bc2..0000000 --- a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt +++ /dev/null @@ -1,58 +0,0 @@ -Socionext UniPhier USB3 Super-Speed (SS) PHY - -This describes the devicetree bindings for PHY interfaces built into -USB3 controller implemented on Socionext UniPhier SoCs. -Although the controller includes High-Speed PHY and Super-Speed PHY, -this describes about Super-Speed PHY. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-pro4-usb3-ssphy" - for Pro4 SoC - "socionext,uniphier-pro5-usb3-ssphy" - for Pro5 SoC - "socionext,uniphier-pxs2-usb3-ssphy" - for PXs2 SoC - "socionext,uniphier-ld20-usb3-ssphy" - for LD20 SoC - "socionext,uniphier-pxs3-usb3-ssphy" - for PXs3 SoC -- reg: Specifies offset and length of the register set for the device. -- #phy-cells: Should be 0. -- clocks: A list of phandles to the clock gate for USB3 glue layer. - According to the clock-names, appropriate clocks are required. -- clock-names: - "gio", "link" - for Pro4 and Pro5 SoC - "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional. - "phy", "link" - for others -- resets: A list of phandles to the reset control for USB3 glue layer. - According to the reset-names, appropriate resets are required. -- reset-names: - "gio", "link" - for Pro4 and Pro5 SoC - "phy", "link" - for others - -Optional properties: -- vbus-supply: A phandle to the regulator for USB VBUS. - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - - usb-glue@65b00000 { - compatible = "socionext,uniphier-ld20-dwc3-glue", - "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x65b00000 0x400>; - - usb_vbus0: regulator { - ... - }; - - usb_ssphy0: ss-phy@300 { - compatible = "socionext,uniphier-ld20-usb3-ssphy"; - reg = <0x300 0x10>; - #phy-cells = <0>; - clock-names = "link", "phy"; - clocks = <&sys_clk 14>, <&sys_clk 16>; - reset-names = "link", "phy"; - resets = <&sys_rst 14>, <&sys_rst 16>; - vbus-supply = <&usb_vbus0>; - }; - ... - };