diff mbox series

[v6,08/16] soc: mediatek: cmdq: add write_s function

Message ID 1590685491-17107-9-git-send-email-dennis-yc.hsieh@mediatek.com (mailing list archive)
State New, archived
Headers show
Series [v6,01/16] dt-binding: gce: add gce header file for mt6779 | expand

Commit Message

Dennis-YC Hsieh May 28, 2020, 5:04 p.m. UTC 
add write_s function in cmdq helper functions which
writes value contains in internal register to address
with large dma access support.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c   | 21 ++++++++++++++++++++-
 include/linux/mailbox/mtk-cmdq-mailbox.h |  1 +
 include/linux/soc/mediatek/mtk-cmdq.h    | 20 ++++++++++++++++++++
 3 files changed, 41 insertions(+), 1 deletion(-)

Comments

Matthias Brugger May 28, 2020, 9:08 p.m. UTC | #1 
On 28/05/2020 19:04, Dennis YC Hsieh wrote:
> add write_s function in cmdq helper functions which
> writes value contains in internal register to address
> with large dma access support.
> 
> Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
> ---
>  drivers/soc/mediatek/mtk-cmdq-helper.c   | 21 ++++++++++++++++++++-
>  include/linux/mailbox/mtk-cmdq-mailbox.h |  1 +
>  include/linux/soc/mediatek/mtk-cmdq.h    | 20 ++++++++++++++++++++
>  3 files changed, 41 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index 33153d17c9d9..ee24c0ec0a24 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -18,6 +18,10 @@ struct cmdq_instruction {
>  	union {
>  		u32 value;
>  		u32 mask;
> +		struct {
> +			u16 arg_c;
> +			u16 src_reg;
> +		};
>  	};
>  	union {
>  		u16 offset;
> @@ -29,7 +33,7 @@ struct cmdq_instruction {
>  		struct {
>  			u8 sop:5;
>  			u8 arg_c_t:1;
> -			u8 arg_b_t:1;
> +			u8 src_t:1;

This should be part of 7/16.

>  			u8 dst_t:1;
>  		};
>  	};
> @@ -222,6 +226,21 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
>  }
>  EXPORT_SYMBOL(cmdq_pkt_write_mask);
>  
> +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> +		     u16 addr_low, u16 src_reg_idx)
> +{
> +	struct cmdq_instruction inst = { {0} };

If you want an empty struct on the stack, I think {}; should be enough, right?

Regards,
Matthias

> +
> +	inst.op = CMDQ_CODE_WRITE_S;
> +	inst.src_t = CMDQ_REG_TYPE;
> +	inst.sop = high_addr_reg_idx;
> +	inst.offset = addr_low;
> +	inst.src_reg = src_reg_idx;
> +
> +	return cmdq_pkt_append_command(pkt, inst);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_write_s);
> +
>  int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
>  {
>  	struct cmdq_instruction inst = { {0} };
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index 121c3bb6d3de..ee67dd3b86f5 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -59,6 +59,7 @@ enum cmdq_code {
>  	CMDQ_CODE_JUMP = 0x10,
>  	CMDQ_CODE_WFE = 0x20,
>  	CMDQ_CODE_EOC = 0x40,
> +	CMDQ_CODE_WRITE_S = 0x90,
>  	CMDQ_CODE_LOGIC = 0xa0,
>  };
>  
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index 83340211e1d3..d623f1aa7814 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -12,6 +12,8 @@
>  #include <linux/timer.h>
>  
>  #define CMDQ_NO_TIMEOUT		0xffffffffu
> +#define CMDQ_ADDR_HIGH(addr)	((u32)(((addr) >> 16) & GENMASK(31, 0)))
> +#define CMDQ_ADDR_LOW(addr)	((u16)(addr) | BIT(1))
>  
>  struct cmdq_pkt;
>  
> @@ -102,6 +104,24 @@ int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
>  int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
>  			u16 offset, u32 value, u32 mask);
>  
> +/**
> + * cmdq_pkt_write_s() - append write_s command to the CMDQ packet
> + * @pkt:	the CMDQ packet
> + * @high_addr_reg_idx:	internal register ID which contains high address of pa
> + * @addr_low:	low address of pa
> + * @src_reg_idx:	the CMDQ internal register ID which cache source value
> + * @mask:	the specified target address mask, use U32_MAX if no need
> + *
> + * Return: 0 for success; else the error code is returned
> + *
> + * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
> + * to get high address and call cmdq_pkt_assign() to assign value into internal
> + * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
> + * call to this function.
> + */
> +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> +		     u16 addr_low, u16 src_reg_idx);
> +
>  /**
>   * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
>   * @pkt:	the CMDQ packet
>
Dennis-YC Hsieh May 29, 2020, 12:53 a.m. UTC | #2 
Hi Matthias,

Thanks for your comment.

On Thu, 2020-05-28 at 23:08 +0200, Matthias Brugger wrote:
> 
> On 28/05/2020 19:04, Dennis YC Hsieh wrote:
> > add write_s function in cmdq helper functions which
> > writes value contains in internal register to address
> > with large dma access support.
> > 
> > Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
> > ---
> >  drivers/soc/mediatek/mtk-cmdq-helper.c   | 21 ++++++++++++++++++++-
> >  include/linux/mailbox/mtk-cmdq-mailbox.h |  1 +
> >  include/linux/soc/mediatek/mtk-cmdq.h    | 20 ++++++++++++++++++++
> >  3 files changed, 41 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > index 33153d17c9d9..ee24c0ec0a24 100644
> > --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> > +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > @@ -18,6 +18,10 @@ struct cmdq_instruction {
> >  	union {
> >  		u32 value;
> >  		u32 mask;
> > +		struct {
> > +			u16 arg_c;
> > +			u16 src_reg;
> > +		};
> >  	};
> >  	union {
> >  		u16 offset;
> > @@ -29,7 +33,7 @@ struct cmdq_instruction {
> >  		struct {
> >  			u8 sop:5;
> >  			u8 arg_c_t:1;
> > -			u8 arg_b_t:1;
> > +			u8 src_t:1;
> 
> This should be part of 7/16.

ok, I'll move it

> 
> >  			u8 dst_t:1;
> >  		};
> >  	};
> > @@ -222,6 +226,21 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
> >  }
> >  EXPORT_SYMBOL(cmdq_pkt_write_mask);
> >  
> > +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> > +		     u16 addr_low, u16 src_reg_idx)
> > +{
> > +	struct cmdq_instruction inst = { {0} };
> 
> If you want an empty struct on the stack, I think {}; should be enough, right?

Yes, I'll change the style, thanks


Regards,
Dennis

> 
> Regards,
> Matthias
> 
> > +
> > +	inst.op = CMDQ_CODE_WRITE_S;
> > +	inst.src_t = CMDQ_REG_TYPE;
> > +	inst.sop = high_addr_reg_idx;
> > +	inst.offset = addr_low;
> > +	inst.src_reg = src_reg_idx;
> > +
> > +	return cmdq_pkt_append_command(pkt, inst);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_write_s);
> > +
> >  int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
> >  {
> >  	struct cmdq_instruction inst = { {0} };
> > diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> > index 121c3bb6d3de..ee67dd3b86f5 100644
> > --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> > +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> > @@ -59,6 +59,7 @@ enum cmdq_code {
> >  	CMDQ_CODE_JUMP = 0x10,
> >  	CMDQ_CODE_WFE = 0x20,
> >  	CMDQ_CODE_EOC = 0x40,
> > +	CMDQ_CODE_WRITE_S = 0x90,
> >  	CMDQ_CODE_LOGIC = 0xa0,
> >  };
> >  
> > diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> > index 83340211e1d3..d623f1aa7814 100644
> > --- a/include/linux/soc/mediatek/mtk-cmdq.h
> > +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> > @@ -12,6 +12,8 @@
> >  #include <linux/timer.h>
> >  
> >  #define CMDQ_NO_TIMEOUT		0xffffffffu
> > +#define CMDQ_ADDR_HIGH(addr)	((u32)(((addr) >> 16) & GENMASK(31, 0)))
> > +#define CMDQ_ADDR_LOW(addr)	((u16)(addr) | BIT(1))
> >  
> >  struct cmdq_pkt;
> >  
> > @@ -102,6 +104,24 @@ int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
> >  int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
> >  			u16 offset, u32 value, u32 mask);
> >  
> > +/**
> > + * cmdq_pkt_write_s() - append write_s command to the CMDQ packet
> > + * @pkt:	the CMDQ packet
> > + * @high_addr_reg_idx:	internal register ID which contains high address of pa
> > + * @addr_low:	low address of pa
> > + * @src_reg_idx:	the CMDQ internal register ID which cache source value
> > + * @mask:	the specified target address mask, use U32_MAX if no need
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + *
> > + * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
> > + * to get high address and call cmdq_pkt_assign() to assign value into internal
> > + * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
> > + * call to this function.
> > + */
> > +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> > +		     u16 addr_low, u16 src_reg_idx);
> > +
> >  /**
> >   * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
> >   * @pkt:	the CMDQ packet
> >
diff mbox series

Patch

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 33153d17c9d9..ee24c0ec0a24 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -18,6 +18,10 @@  struct cmdq_instruction {
 	union {
 		u32 value;
 		u32 mask;
+		struct {
+			u16 arg_c;
+			u16 src_reg;
+		};
 	};
 	union {
 		u16 offset;
@@ -29,7 +33,7 @@  struct cmdq_instruction {
 		struct {
 			u8 sop:5;
 			u8 arg_c_t:1;
-			u8 arg_b_t:1;
+			u8 src_t:1;
 			u8 dst_t:1;
 		};
 	};
@@ -222,6 +226,21 @@  int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
 }
 EXPORT_SYMBOL(cmdq_pkt_write_mask);
 
+int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+		     u16 addr_low, u16 src_reg_idx)
+{
+	struct cmdq_instruction inst = { {0} };
+
+	inst.op = CMDQ_CODE_WRITE_S;
+	inst.src_t = CMDQ_REG_TYPE;
+	inst.sop = high_addr_reg_idx;
+	inst.offset = addr_low;
+	inst.src_reg = src_reg_idx;
+
+	return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s);
+
 int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
 {
 	struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 121c3bb6d3de..ee67dd3b86f5 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -59,6 +59,7 @@  enum cmdq_code {
 	CMDQ_CODE_JUMP = 0x10,
 	CMDQ_CODE_WFE = 0x20,
 	CMDQ_CODE_EOC = 0x40,
+	CMDQ_CODE_WRITE_S = 0x90,
 	CMDQ_CODE_LOGIC = 0xa0,
 };
 
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 83340211e1d3..d623f1aa7814 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -12,6 +12,8 @@ 
 #include <linux/timer.h>
 
 #define CMDQ_NO_TIMEOUT		0xffffffffu
+#define CMDQ_ADDR_HIGH(addr)	((u32)(((addr) >> 16) & GENMASK(31, 0)))
+#define CMDQ_ADDR_LOW(addr)	((u16)(addr) | BIT(1))
 
 struct cmdq_pkt;
 
@@ -102,6 +104,24 @@  int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
 int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
 			u16 offset, u32 value, u32 mask);
 
+/**
+ * cmdq_pkt_write_s() - append write_s command to the CMDQ packet
+ * @pkt:	the CMDQ packet
+ * @high_addr_reg_idx:	internal register ID which contains high address of pa
+ * @addr_low:	low address of pa
+ * @src_reg_idx:	the CMDQ internal register ID which cache source value
+ * @mask:	the specified target address mask, use U32_MAX if no need
+ *
+ * Return: 0 for success; else the error code is returned
+ *
+ * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
+ * to get high address and call cmdq_pkt_assign() to assign value into internal
+ * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
+ * call to this function.
+ */
+int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+		     u16 addr_low, u16 src_reg_idx);
+
 /**
  * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
  * @pkt:	the CMDQ packet