| Message ID | 1592745731-14614-3-git-send-email-dennis-yc.hsieh@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | support gce on mt6779 platform | expand |
On Sun, 2020-06-21 at 21:22 +0800, Dennis YC Hsieh wrote: > Some gce hardware shift pc and end address in register to support > large dram addressing. > Implement gce address shift when write or read pc and end register. > And add shift bit in platform definition. > > Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> > --- > drivers/mailbox/mtk-cmdq-mailbox.c | 61 ++++++++++++++++++++++-------- > include/linux/mailbox/mtk-cmdq-mailbox.h | 2 + > 2 files changed, 48 insertions(+), 15 deletions(-) > > diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c > index 9a6ce9f5a7db..4dbee9258127 100644 > --- a/drivers/mailbox/mtk-cmdq-mailbox.c > +++ b/drivers/mailbox/mtk-cmdq-mailbox.c > @@ -76,8 +76,22 @@ struct cmdq { > struct cmdq_thread *thread; > struct clk *clock; > bool suspended; > + u8 shift_pa; > }; > > +struct gce_plat { > + u32 thread_nr; > + u8 shift; > +}; > + > +u8 cmdq_mbox_shift(struct mbox_chan *chan) How about rename this function as cmdq_get_shift_pa()? Bibby > +{ > + struct cmdq *cmdq = container_of(chan->mbox, struct cmdq, mbox); > + > + return cmdq->shift_pa; > +} > +EXPORT_SYMBOL(cmdq_mbox_shift); > + > static int cmdq_thread_suspend(struct cmdq *cmdq, struct cmdq_thread *thread) > { > u32 status; > @@ -183,7 +197,7 @@ static void cmdq_task_remove_wfe(struct cmdq_task *task) > for (i = 0; i < CMDQ_NUM_CMD(task->pkt); i++) > if (cmdq_command_is_wfe(base[i])) > base[i] = (u64)CMDQ_JUMP_BY_OFFSET << 32 | > - CMDQ_JUMP_PASS; > + CMDQ_JUMP_PASS >> task->cmdq->shift_pa; > dma_sync_single_for_device(dev, task->pa_base, task->pkt->cmd_buf_size, > DMA_TO_DEVICE); > } > @@ -221,13 +235,15 @@ static void cmdq_task_handle_error(struct cmdq_task *task) > { > struct cmdq_thread *thread = task->thread; > struct cmdq_task *next_task; > + struct cmdq *cmdq = task->cmdq; > > - dev_err(task->cmdq->mbox.dev, "task 0x%p error\n", task); > - WARN_ON(cmdq_thread_suspend(task->cmdq, thread) < 0); > + dev_err(cmdq->mbox.dev, "task 0x%p error\n", task); > + WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0); > next_task = list_first_entry_or_null(&thread->task_busy_list, > struct cmdq_task, list_entry); > if (next_task) > - writel(next_task->pa_base, thread->base + CMDQ_THR_CURR_ADDR); > + writel(next_task->pa_base >> cmdq->shift_pa, > + thread->base + CMDQ_THR_CURR_ADDR); > cmdq_thread_resume(thread); > } > > @@ -257,7 +273,7 @@ static void cmdq_thread_irq_handler(struct cmdq *cmdq, > else > return; > > - curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR); > + curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR) << cmdq->shift_pa; > > list_for_each_entry_safe(task, tmp, &thread->task_busy_list, > list_entry) { > @@ -373,16 +389,20 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data) > WARN_ON(clk_enable(cmdq->clock) < 0); > WARN_ON(cmdq_thread_reset(cmdq, thread) < 0); > > - writel(task->pa_base, thread->base + CMDQ_THR_CURR_ADDR); > - writel(task->pa_base + pkt->cmd_buf_size, > + writel(task->pa_base >> cmdq->shift_pa, > + thread->base + CMDQ_THR_CURR_ADDR); > + writel((task->pa_base + pkt->cmd_buf_size) >> cmdq->shift_pa, > thread->base + CMDQ_THR_END_ADDR); > + > writel(thread->priority, thread->base + CMDQ_THR_PRIORITY); > writel(CMDQ_THR_IRQ_EN, thread->base + CMDQ_THR_IRQ_ENABLE); > writel(CMDQ_THR_ENABLED, thread->base + CMDQ_THR_ENABLE_TASK); > } else { > WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0); > - curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR); > - end_pa = readl(thread->base + CMDQ_THR_END_ADDR); > + curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR) << > + cmdq->shift_pa; > + end_pa = readl(thread->base + CMDQ_THR_END_ADDR) << > + cmdq->shift_pa; > > /* > * Atomic execution should remove the following wfe, i.e. only > @@ -395,7 +415,7 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data) > cmdq_thread_wait_end(thread, end_pa); > WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0); > /* set to this task directly */ > - writel(task->pa_base, > + writel(task->pa_base >> cmdq->shift_pa, > thread->base + CMDQ_THR_CURR_ADDR); > } else { > cmdq_task_insert_into_thread(task); > @@ -407,14 +427,14 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data) > if (curr_pa == end_pa - CMDQ_INST_SIZE || > curr_pa == end_pa) { > /* set to this task directly */ > - writel(task->pa_base, > + writel(task->pa_base >> cmdq->shift_pa, > thread->base + CMDQ_THR_CURR_ADDR); > } else { > cmdq_task_insert_into_thread(task); > smp_mb(); /* modify jump before enable thread */ > } > } > - writel(task->pa_base + pkt->cmd_buf_size, > + writel((task->pa_base + pkt->cmd_buf_size) >> cmdq->shift_pa, > thread->base + CMDQ_THR_END_ADDR); > cmdq_thread_resume(thread); > } > @@ -461,6 +481,7 @@ static int cmdq_probe(struct platform_device *pdev) > struct resource *res; > struct cmdq *cmdq; > int err, i; > + struct gce_plat *plat_data; > > cmdq = devm_kzalloc(dev, sizeof(*cmdq), GFP_KERNEL); > if (!cmdq) > @@ -479,7 +500,14 @@ static int cmdq_probe(struct platform_device *pdev) > return -EINVAL; > } > > - cmdq->thread_nr = (u32)(unsigned long)of_device_get_match_data(dev); > + plat_data = (struct gce_plat *)of_device_get_match_data(dev); > + if (!plat_data) { > + dev_err(dev, "failed to get match data\n"); > + return -EINVAL; > + } > + > + cmdq->thread_nr = plat_data->thread_nr; > + cmdq->shift_pa = plat_data->shift; > cmdq->irq_mask = GENMASK(cmdq->thread_nr - 1, 0); > err = devm_request_irq(dev, cmdq->irq, cmdq_irq_handler, IRQF_SHARED, > "mtk_cmdq", cmdq); > @@ -542,9 +570,12 @@ static int cmdq_probe(struct platform_device *pdev) > .resume = cmdq_resume, > }; > > +static const struct gce_plat gce_plat_v2 = {.thread_nr = 16}; > +static const struct gce_plat gce_plat_v3 = {.thread_nr = 24}; > + > static const struct of_device_id cmdq_of_ids[] = { > - {.compatible = "mediatek,mt8173-gce", .data = (void *)16}, > - {.compatible = "mediatek,mt8183-gce", .data = (void *)24}, > + {.compatible = "mediatek,mt8173-gce", .data = (void *)&gce_plat_v2}, > + {.compatible = "mediatek,mt8183-gce", .data = (void *)&gce_plat_v3}, > {} > }; > > diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h > index a4dc45fbec0a..dfe5b2eb85cc 100644 > --- a/include/linux/mailbox/mtk-cmdq-mailbox.h > +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h > @@ -88,4 +88,6 @@ struct cmdq_pkt { > void *cl; > }; > > +u8 cmdq_mbox_shift(struct mbox_chan *chan); > + > #endif /* __MTK_CMDQ_MAILBOX_H__ */
Hi Bibby, Thanks for your comment. On Mon, 2020-06-22 at 10:33 +0800, Bibby Hsieh wrote: > On Sun, 2020-06-21 at 21:22 +0800, Dennis YC Hsieh wrote: > > Some gce hardware shift pc and end address in register to support > > large dram addressing. > > Implement gce address shift when write or read pc and end register. > > And add shift bit in platform definition. > > > > Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> > > --- > > drivers/mailbox/mtk-cmdq-mailbox.c | 61 ++++++++++++++++++++++-------- > > include/linux/mailbox/mtk-cmdq-mailbox.h | 2 + > > 2 files changed, 48 insertions(+), 15 deletions(-) > > > > diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c > > index 9a6ce9f5a7db..4dbee9258127 100644 > > --- a/drivers/mailbox/mtk-cmdq-mailbox.c > > +++ b/drivers/mailbox/mtk-cmdq-mailbox.c > > @@ -76,8 +76,22 @@ struct cmdq { > > struct cmdq_thread *thread; > > struct clk *clock; > > bool suspended; > > + u8 shift_pa; > > }; > > > > +struct gce_plat { > > + u32 thread_nr; > > + u8 shift; > > +}; > > + > > +u8 cmdq_mbox_shift(struct mbox_chan *chan) > > How about rename this function as cmdq_get_shift_pa()? ok, I'll rename it, thanks Regards, Dennis > > > Bibby > > > +{ > > + struct cmdq *cmdq = container_of(chan->mbox, struct cmdq, mbox); > > + > > + return cmdq->shift_pa; > > +} > > +EXPORT_SYMBOL(cmdq_mbox_shift); > > + > > static int cmdq_thread_suspend(struct cmdq *cmdq, struct cmdq_thread *thread) > > { > > u32 status; > > @@ -183,7 +197,7 @@ static void cmdq_task_remove_wfe(struct cmdq_task *task) > > for (i = 0; i < CMDQ_NUM_CMD(task->pkt); i++) > > if (cmdq_command_is_wfe(base[i])) > > base[i] = (u64)CMDQ_JUMP_BY_OFFSET << 32 | > > - CMDQ_JUMP_PASS; > > + CMDQ_JUMP_PASS >> task->cmdq->shift_pa; > > dma_sync_single_for_device(dev, task->pa_base, task->pkt->cmd_buf_size, > > DMA_TO_DEVICE); > > } > > @@ -221,13 +235,15 @@ static void cmdq_task_handle_error(struct cmdq_task *task) > > { > > struct cmdq_thread *thread = task->thread; > > struct cmdq_task *next_task; > > + struct cmdq *cmdq = task->cmdq; > > > > - dev_err(task->cmdq->mbox.dev, "task 0x%p error\n", task); > > - WARN_ON(cmdq_thread_suspend(task->cmdq, thread) < 0); > > + dev_err(cmdq->mbox.dev, "task 0x%p error\n", task); > > + WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0); > > next_task = list_first_entry_or_null(&thread->task_busy_list, > > struct cmdq_task, list_entry); > > if (next_task) > > - writel(next_task->pa_base, thread->base + CMDQ_THR_CURR_ADDR); > > + writel(next_task->pa_base >> cmdq->shift_pa, > > + thread->base + CMDQ_THR_CURR_ADDR); > > cmdq_thread_resume(thread); > > } > > > > @@ -257,7 +273,7 @@ static void cmdq_thread_irq_handler(struct cmdq *cmdq, > > else > > return; > > > > - curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR); > > + curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR) << cmdq->shift_pa; > > > > list_for_each_entry_safe(task, tmp, &thread->task_busy_list, > > list_entry) { > > @@ -373,16 +389,20 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data) > > WARN_ON(clk_enable(cmdq->clock) < 0); > > WARN_ON(cmdq_thread_reset(cmdq, thread) < 0); > > > > - writel(task->pa_base, thread->base + CMDQ_THR_CURR_ADDR); > > - writel(task->pa_base + pkt->cmd_buf_size, > > + writel(task->pa_base >> cmdq->shift_pa, > > + thread->base + CMDQ_THR_CURR_ADDR); > > + writel((task->pa_base + pkt->cmd_buf_size) >> cmdq->shift_pa, > > thread->base + CMDQ_THR_END_ADDR); > > + > > writel(thread->priority, thread->base + CMDQ_THR_PRIORITY); > > writel(CMDQ_THR_IRQ_EN, thread->base + CMDQ_THR_IRQ_ENABLE); > > writel(CMDQ_THR_ENABLED, thread->base + CMDQ_THR_ENABLE_TASK); > > } else { > > WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0); > > - curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR); > > - end_pa = readl(thread->base + CMDQ_THR_END_ADDR); > > + curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR) << > > + cmdq->shift_pa; > > + end_pa = readl(thread->base + CMDQ_THR_END_ADDR) << > > + cmdq->shift_pa; > > > > /* > > * Atomic execution should remove the following wfe, i.e. only > > @@ -395,7 +415,7 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data) > > cmdq_thread_wait_end(thread, end_pa); > > WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0); > > /* set to this task directly */ > > - writel(task->pa_base, > > + writel(task->pa_base >> cmdq->shift_pa, > > thread->base + CMDQ_THR_CURR_ADDR); > > } else { > > cmdq_task_insert_into_thread(task); > > @@ -407,14 +427,14 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data) > > if (curr_pa == end_pa - CMDQ_INST_SIZE || > > curr_pa == end_pa) { > > /* set to this task directly */ > > - writel(task->pa_base, > > + writel(task->pa_base >> cmdq->shift_pa, > > thread->base + CMDQ_THR_CURR_ADDR); > > } else { > > cmdq_task_insert_into_thread(task); > > smp_mb(); /* modify jump before enable thread */ > > } > > } > > - writel(task->pa_base + pkt->cmd_buf_size, > > + writel((task->pa_base + pkt->cmd_buf_size) >> cmdq->shift_pa, > > thread->base + CMDQ_THR_END_ADDR); > > cmdq_thread_resume(thread); > > } > > @@ -461,6 +481,7 @@ static int cmdq_probe(struct platform_device *pdev) > > struct resource *res; > > struct cmdq *cmdq; > > int err, i; > > + struct gce_plat *plat_data; > > > > cmdq = devm_kzalloc(dev, sizeof(*cmdq), GFP_KERNEL); > > if (!cmdq) > > @@ -479,7 +500,14 @@ static int cmdq_probe(struct platform_device *pdev) > > return -EINVAL; > > } > > > > - cmdq->thread_nr = (u32)(unsigned long)of_device_get_match_data(dev); > > + plat_data = (struct gce_plat *)of_device_get_match_data(dev); > > + if (!plat_data) { > > + dev_err(dev, "failed to get match data\n"); > > + return -EINVAL; > > + } > > + > > + cmdq->thread_nr = plat_data->thread_nr; > > + cmdq->shift_pa = plat_data->shift; > > cmdq->irq_mask = GENMASK(cmdq->thread_nr - 1, 0); > > err = devm_request_irq(dev, cmdq->irq, cmdq_irq_handler, IRQF_SHARED, > > "mtk_cmdq", cmdq); > > @@ -542,9 +570,12 @@ static int cmdq_probe(struct platform_device *pdev) > > .resume = cmdq_resume, > > }; > > > > +static const struct gce_plat gce_plat_v2 = {.thread_nr = 16}; > > +static const struct gce_plat gce_plat_v3 = {.thread_nr = 24}; > > + > > static const struct of_device_id cmdq_of_ids[] = { > > - {.compatible = "mediatek,mt8173-gce", .data = (void *)16}, > > - {.compatible = "mediatek,mt8183-gce", .data = (void *)24}, > > + {.compatible = "mediatek,mt8173-gce", .data = (void *)&gce_plat_v2}, > > + {.compatible = "mediatek,mt8183-gce", .data = (void *)&gce_plat_v3}, > > {} > > }; > > > > diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h > > index a4dc45fbec0a..dfe5b2eb85cc 100644 > > --- a/include/linux/mailbox/mtk-cmdq-mailbox.h > > +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h > > @@ -88,4 +88,6 @@ struct cmdq_pkt { > > void *cl; > > }; > > > > +u8 cmdq_mbox_shift(struct mbox_chan *chan); > > + > > #endif /* __MTK_CMDQ_MAILBOX_H__ */ > >
diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c index 9a6ce9f5a7db..4dbee9258127 100644 --- a/drivers/mailbox/mtk-cmdq-mailbox.c +++ b/drivers/mailbox/mtk-cmdq-mailbox.c @@ -76,8 +76,22 @@ struct cmdq { struct cmdq_thread *thread; struct clk *clock; bool suspended; + u8 shift_pa; }; +struct gce_plat { + u32 thread_nr; + u8 shift; +}; + +u8 cmdq_mbox_shift(struct mbox_chan *chan) +{ + struct cmdq *cmdq = container_of(chan->mbox, struct cmdq, mbox); + + return cmdq->shift_pa; +} +EXPORT_SYMBOL(cmdq_mbox_shift); + static int cmdq_thread_suspend(struct cmdq *cmdq, struct cmdq_thread *thread) { u32 status; @@ -183,7 +197,7 @@ static void cmdq_task_remove_wfe(struct cmdq_task *task) for (i = 0; i < CMDQ_NUM_CMD(task->pkt); i++) if (cmdq_command_is_wfe(base[i])) base[i] = (u64)CMDQ_JUMP_BY_OFFSET << 32 | - CMDQ_JUMP_PASS; + CMDQ_JUMP_PASS >> task->cmdq->shift_pa; dma_sync_single_for_device(dev, task->pa_base, task->pkt->cmd_buf_size, DMA_TO_DEVICE); } @@ -221,13 +235,15 @@ static void cmdq_task_handle_error(struct cmdq_task *task) { struct cmdq_thread *thread = task->thread; struct cmdq_task *next_task; + struct cmdq *cmdq = task->cmdq; - dev_err(task->cmdq->mbox.dev, "task 0x%p error\n", task); - WARN_ON(cmdq_thread_suspend(task->cmdq, thread) < 0); + dev_err(cmdq->mbox.dev, "task 0x%p error\n", task); + WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0); next_task = list_first_entry_or_null(&thread->task_busy_list, struct cmdq_task, list_entry); if (next_task) - writel(next_task->pa_base, thread->base + CMDQ_THR_CURR_ADDR); + writel(next_task->pa_base >> cmdq->shift_pa, + thread->base + CMDQ_THR_CURR_ADDR); cmdq_thread_resume(thread); } @@ -257,7 +273,7 @@ static void cmdq_thread_irq_handler(struct cmdq *cmdq, else return; - curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR); + curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR) << cmdq->shift_pa; list_for_each_entry_safe(task, tmp, &thread->task_busy_list, list_entry) { @@ -373,16 +389,20 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data) WARN_ON(clk_enable(cmdq->clock) < 0); WARN_ON(cmdq_thread_reset(cmdq, thread) < 0); - writel(task->pa_base, thread->base + CMDQ_THR_CURR_ADDR); - writel(task->pa_base + pkt->cmd_buf_size, + writel(task->pa_base >> cmdq->shift_pa, + thread->base + CMDQ_THR_CURR_ADDR); + writel((task->pa_base + pkt->cmd_buf_size) >> cmdq->shift_pa, thread->base + CMDQ_THR_END_ADDR); + writel(thread->priority, thread->base + CMDQ_THR_PRIORITY); writel(CMDQ_THR_IRQ_EN, thread->base + CMDQ_THR_IRQ_ENABLE); writel(CMDQ_THR_ENABLED, thread->base + CMDQ_THR_ENABLE_TASK); } else { WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0); - curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR); - end_pa = readl(thread->base + CMDQ_THR_END_ADDR); + curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR) << + cmdq->shift_pa; + end_pa = readl(thread->base + CMDQ_THR_END_ADDR) << + cmdq->shift_pa; /* * Atomic execution should remove the following wfe, i.e. only @@ -395,7 +415,7 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data) cmdq_thread_wait_end(thread, end_pa); WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0); /* set to this task directly */ - writel(task->pa_base, + writel(task->pa_base >> cmdq->shift_pa, thread->base + CMDQ_THR_CURR_ADDR); } else { cmdq_task_insert_into_thread(task); @@ -407,14 +427,14 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data) if (curr_pa == end_pa - CMDQ_INST_SIZE || curr_pa == end_pa) { /* set to this task directly */ - writel(task->pa_base, + writel(task->pa_base >> cmdq->shift_pa, thread->base + CMDQ_THR_CURR_ADDR); } else { cmdq_task_insert_into_thread(task); smp_mb(); /* modify jump before enable thread */ } } - writel(task->pa_base + pkt->cmd_buf_size, + writel((task->pa_base + pkt->cmd_buf_size) >> cmdq->shift_pa, thread->base + CMDQ_THR_END_ADDR); cmdq_thread_resume(thread); } @@ -461,6 +481,7 @@ static int cmdq_probe(struct platform_device *pdev) struct resource *res; struct cmdq *cmdq; int err, i; + struct gce_plat *plat_data; cmdq = devm_kzalloc(dev, sizeof(*cmdq), GFP_KERNEL); if (!cmdq) @@ -479,7 +500,14 @@ static int cmdq_probe(struct platform_device *pdev) return -EINVAL; } - cmdq->thread_nr = (u32)(unsigned long)of_device_get_match_data(dev); + plat_data = (struct gce_plat *)of_device_get_match_data(dev); + if (!plat_data) { + dev_err(dev, "failed to get match data\n"); + return -EINVAL; + } + + cmdq->thread_nr = plat_data->thread_nr; + cmdq->shift_pa = plat_data->shift; cmdq->irq_mask = GENMASK(cmdq->thread_nr - 1, 0); err = devm_request_irq(dev, cmdq->irq, cmdq_irq_handler, IRQF_SHARED, "mtk_cmdq", cmdq); @@ -542,9 +570,12 @@ static int cmdq_probe(struct platform_device *pdev) .resume = cmdq_resume, }; +static const struct gce_plat gce_plat_v2 = {.thread_nr = 16}; +static const struct gce_plat gce_plat_v3 = {.thread_nr = 24}; + static const struct of_device_id cmdq_of_ids[] = { - {.compatible = "mediatek,mt8173-gce", .data = (void *)16}, - {.compatible = "mediatek,mt8183-gce", .data = (void *)24}, + {.compatible = "mediatek,mt8173-gce", .data = (void *)&gce_plat_v2}, + {.compatible = "mediatek,mt8183-gce", .data = (void *)&gce_plat_v3}, {} }; diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h index a4dc45fbec0a..dfe5b2eb85cc 100644 --- a/include/linux/mailbox/mtk-cmdq-mailbox.h +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h @@ -88,4 +88,6 @@ struct cmdq_pkt { void *cl; }; +u8 cmdq_mbox_shift(struct mbox_chan *chan); + #endif /* __MTK_CMDQ_MAILBOX_H__ */
Some gce hardware shift pc and end address in register to support large dram addressing. Implement gce address shift when write or read pc and end register. And add shift bit in platform definition. Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> --- drivers/mailbox/mtk-cmdq-mailbox.c | 61 ++++++++++++++++++++++-------- include/linux/mailbox/mtk-cmdq-mailbox.h | 2 + 2 files changed, 48 insertions(+), 15 deletions(-)