diff mbox series

[V6,3/9] pinctrl: imx8mm: Support building as module

Message ID 1592979844-18833-4-git-send-email-Anson.Huang@nxp.com (mailing list archive)
State Mainlined
Commit a302b0e1001a889e5dd64b09ca76892f01b9610e
Headers show
Series Support i.MX8 SoCs pinctrl drivers built as module | expand

Commit Message

Anson Huang June 24, 2020, 6:23 a.m. UTC 
Change configuration to "tristate", add module device table,
author, description and license to support building i.MX8MM
pinctrl driver as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 drivers/pinctrl/freescale/Kconfig          | 2 +-
 drivers/pinctrl/freescale/pinctrl-imx8mm.c | 6 ++++++
 2 files changed, 7 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index 4ca44dd..3681c4d 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -124,7 +124,7 @@  config PINCTRL_IMX7ULP
 	  Say Y here to enable the imx7ulp pinctrl driver
 
 config PINCTRL_IMX8MM
-	bool "IMX8MM pinctrl driver"
+	tristate "IMX8MM pinctrl driver"
 	depends on ARCH_MXC
 	select PINCTRL_IMX
 	help
diff --git a/drivers/pinctrl/freescale/pinctrl-imx8mm.c b/drivers/pinctrl/freescale/pinctrl-imx8mm.c
index 6d1038a..31c5d88 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx8mm.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx8mm.c
@@ -5,6 +5,7 @@ 
 
 #include <linux/err.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/platform_device.h>
@@ -326,6 +327,7 @@  static const struct of_device_id imx8mm_pinctrl_of_match[] = {
 	{ .compatible = "fsl,imx8mm-iomuxc", .data = &imx8mm_pinctrl_info, },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, imx8mm_pinctrl_of_match);
 
 static int imx8mm_pinctrl_probe(struct platform_device *pdev)
 {
@@ -346,3 +348,7 @@  static int __init imx8mm_pinctrl_init(void)
 	return platform_driver_register(&imx8mm_pinctrl_driver);
 }
 arch_initcall(imx8mm_pinctrl_init);
+
+MODULE_AUTHOR("Bai Ping <ping.bai@nxp.com>");
+MODULE_DESCRIPTION("NXP i.MX8MM pinctrl driver");
+MODULE_LICENSE("GPL v2");