@@ -1036,6 +1036,7 @@ config I2C_STM32F7
tristate "STMicroelectronics STM32F7 I2C support"
depends on ARCH_STM32 || COMPILE_TEST
select I2C_SLAVE
+ select I2C_SMBUS
help
Enable this option to add support for STM32 I2C controller embedded
in STM32F7 SoCs.
@@ -14,10 +14,12 @@
* This driver is based on i2c-stm32f4.c
*
*/
+#include <linux/atomic.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
@@ -50,6 +52,8 @@
/* STM32F7 I2C control 1 */
#define STM32F7_I2C_CR1_PECEN BIT(23)
+#define STM32F7_I2C_CR1_ALERTEN BIT(22)
+#define STM32F7_I2C_CR1_SMBHEN BIT(20)
#define STM32F7_I2C_CR1_WUPEN BIT(18)
#define STM32F7_I2C_CR1_SBC BIT(16)
#define STM32F7_I2C_CR1_RXDMAEN BIT(15)
@@ -121,6 +125,7 @@
(((n) & STM32F7_I2C_ISR_ADDCODE_MASK) >> 17)
#define STM32F7_I2C_ISR_DIR BIT(16)
#define STM32F7_I2C_ISR_BUSY BIT(15)
+#define STM32F7_I2C_ISR_ALERT BIT(13)
#define STM32F7_I2C_ISR_PECERR BIT(11)
#define STM32F7_I2C_ISR_ARLO BIT(9)
#define STM32F7_I2C_ISR_BERR BIT(8)
@@ -134,6 +139,7 @@
#define STM32F7_I2C_ISR_TXE BIT(0)
/* STM32F7 I2C Interrupt Clear */
+#define STM32F7_I2C_ICR_ALERTCF BIT(13)
#define STM32F7_I2C_ICR_PECCF BIT(11)
#define STM32F7_I2C_ICR_ARLOCF BIT(9)
#define STM32F7_I2C_ICR_BERRCF BIT(8)
@@ -150,7 +156,7 @@
#define STM32F7_I2C_MAX_LEN 0xff
#define STM32F7_I2C_DMA_LEN_MIN 0x16
-#define STM32F7_I2C_MAX_SLAVE 0x2
+#define STM32F7_I2C_MAX_SLAVE 0x3
#define STM32F7_I2C_DNF_DEFAULT 0
#define STM32F7_I2C_DNF_MAX 16
@@ -275,6 +281,29 @@ struct stm32f7_i2c_msg {
};
/**
+ * struct stm32f7_i2c_host - SMBus host specific data
+ * @client: I2C slave device that represents SMBus host
+ * @notify_start: indicate that this is the start of the notify transaction
+ * @addr: device address of SMBus device that initiate SMBus host protocol
+ */
+struct stm32f7_i2c_host {
+ struct i2c_client *client;
+ bool notify_start;
+ u8 addr;
+};
+
+/**
+ * struct stm32f7_i2c_alert - SMBus alert specific data
+ * @setup: platform data for the smbus_alert i2c client
+ * @ara: I2C slave device used to respond to the SMBus Alert with Alert
+ * Response Address
+ */
+struct stm32f7_i2c_alert {
+ struct i2c_smbus_alert_setup setup;
+ struct i2c_client *ara;
+};
+
+/**
* struct stm32f7_i2c_dev - private data of the controller
* @adap: I2C adapter for this controller
* @dev: device for this controller
@@ -301,6 +330,9 @@ struct stm32f7_i2c_msg {
* @fmp_creg: register address for clearing Fast Mode Plus bits
* @fmp_mask: mask for Fast Mode Plus bits in set register
* @wakeup_src: boolean to know if the device is a wakeup source
+ * @host_notify_cnt: atomic to know number of host_notify enabled clients
+ * @host_notify_client: SMBus host-notify client
+ * @alert: SMBus alert specific data
*/
struct stm32f7_i2c_dev {
struct i2c_adapter adap;
@@ -327,6 +359,9 @@ struct stm32f7_i2c_dev {
u32 fmp_creg;
u32 fmp_mask;
bool wakeup_src;
+ atomic_t host_notify_cnt;
+ struct i2c_client *host_notify_client;
+ struct stm32f7_i2c_alert *alert;
};
/*
@@ -1321,10 +1356,20 @@ static int stm32f7_i2c_get_free_slave_id(struct stm32f7_i2c_dev *i2c_dev,
int i;
/*
- * slave[0] supports 7-bit and 10-bit slave address
- * slave[1] supports 7-bit slave address only
+ * slave[0] support only SMBus Host address (0x8)
+ * slave[1] supports 7-bit and 10-bit slave address
+ * slave[2] supports 7-bit slave address only
*/
- for (i = STM32F7_I2C_MAX_SLAVE - 1; i >= 0; i--) {
+ if (atomic_read(&i2c_dev->host_notify_cnt)) {
+ if (slave->addr == 0x08) {
+ if (i2c_dev->slave[0])
+ goto fail;
+ *id = 0;
+ return 0;
+ }
+ }
+
+ for (i = STM32F7_I2C_MAX_SLAVE - 1; i > 0; i--) {
if (i == 1 && (slave->flags & I2C_CLIENT_TEN))
continue;
if (!i2c_dev->slave[i]) {
@@ -1333,6 +1378,7 @@ static int stm32f7_i2c_get_free_slave_id(struct stm32f7_i2c_dev *i2c_dev,
}
}
+fail:
dev_err(dev, "Slave 0x%x could not be registered\n", slave->addr);
return -EINVAL;
@@ -1586,6 +1632,13 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
f7_msg->result = -EINVAL;
}
+ if (status & STM32F7_I2C_ISR_ALERT) {
+ dev_dbg(dev, "<%s>: SMBus alert received\n", __func__);
+ writel_relaxed(STM32F7_I2C_ICR_ALERTCF, base + STM32F7_I2C_ICR);
+ i2c_handle_smbus_alert(i2c_dev->alert->ara);
+ return IRQ_HANDLED;
+ }
+
if (!i2c_dev->slave_running) {
u32 mask;
/* Disable interrupts */
@@ -1776,7 +1829,13 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
if (!stm32f7_i2c_is_slave_registered(i2c_dev))
stm32f7_i2c_enable_wakeup(i2c_dev, true);
- if (id == 0) {
+ switch (id) {
+ case 0:
+ /* Slave SMBus Host */
+ i2c_dev->slave[id] = slave;
+ break;
+
+ case 1:
/* Configure Own Address 1 */
oar1 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR1);
oar1 &= ~STM32F7_I2C_OAR1_MASK;
@@ -1789,7 +1848,9 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
oar1 |= STM32F7_I2C_OAR1_OA1EN;
i2c_dev->slave[id] = slave;
writel_relaxed(oar1, i2c_dev->base + STM32F7_I2C_OAR1);
- } else if (id == 1) {
+ break;
+
+ case 2:
/* Configure Own Address 2 */
oar2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR2);
oar2 &= ~STM32F7_I2C_OAR2_MASK;
@@ -1802,7 +1863,10 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
oar2 |= STM32F7_I2C_OAR2_OA2EN;
i2c_dev->slave[id] = slave;
writel_relaxed(oar2, i2c_dev->base + STM32F7_I2C_OAR2);
- } else {
+ break;
+
+ default:
+ dev_err(dev, "I2C slave id not supported\n");
ret = -ENODEV;
goto pm_free;
}
@@ -1843,10 +1907,10 @@ static int stm32f7_i2c_unreg_slave(struct i2c_client *slave)
if (ret < 0)
return ret;
- if (id == 0) {
+ if (id == 1) {
mask = STM32F7_I2C_OAR1_OA1EN;
stm32f7_i2c_clr_bits(base + STM32F7_I2C_OAR1, mask);
- } else {
+ } else if (id == 2) {
mask = STM32F7_I2C_OAR2_OA2EN;
stm32f7_i2c_clr_bits(base + STM32F7_I2C_OAR2, mask);
}
@@ -1911,6 +1975,99 @@ static int stm32f7_i2c_setup_fm_plus_bits(struct platform_device *pdev,
&i2c_dev->fmp_mask);
}
+static int stm32f7_i2c_enable_smbus_host(struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct i2c_adapter *adap = &i2c_dev->adap;
+ void __iomem *base = i2c_dev->base;
+ struct i2c_client *client;
+
+ client = i2c_new_smbus_host_notify_device(adap);
+ if (IS_ERR(client))
+ return PTR_ERR(client);
+
+ i2c_dev->host_notify_client = client;
+
+ /* Enable SMBus Host address */
+ stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, STM32F7_I2C_CR1_SMBHEN);
+
+ return 0;
+}
+
+static void stm32f7_i2c_disable_smbus_host(struct stm32f7_i2c_dev *i2c_dev)
+{
+ void __iomem *base = i2c_dev->base;
+
+ if (i2c_dev->host_notify_client) {
+ /* Disable SMBus Host address */
+ stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1,
+ STM32F7_I2C_CR1_SMBHEN);
+ i2c_free_smbus_host_notify_device(i2c_dev->host_notify_client);
+ }
+}
+
+static int stm32f7_i2c_reg_hnotify_client(struct i2c_client *client)
+{
+ struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(client->adapter);
+ int ret;
+
+ /* Only enable on the first device registration */
+ if (atomic_inc_return(&i2c_dev->host_notify_cnt) == 1) {
+ ret = stm32f7_i2c_enable_smbus_host(i2c_dev);
+ if (ret) {
+ dev_err(i2c_dev->dev,
+ "failed to enable SMBus host notify (%d)\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void stm32f7_i2c_unreg_hnotify_client(struct i2c_client *client)
+{
+ struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(client->adapter);
+
+ if (atomic_dec_return(&i2c_dev->host_notify_cnt) == 0)
+ stm32f7_i2c_disable_smbus_host(i2c_dev);
+}
+
+static int stm32f7_i2c_enable_smbus_alert(struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct stm32f7_i2c_alert *alert;
+ struct i2c_adapter *adap = &i2c_dev->adap;
+ struct device *dev = i2c_dev->dev;
+ void __iomem *base = i2c_dev->base;
+
+ alert = devm_kzalloc(dev, sizeof(*alert), GFP_KERNEL);
+ if (!alert)
+ return -ENOMEM;
+
+ alert->ara = i2c_new_smbus_alert_device(adap, &alert->setup);
+ if (IS_ERR(alert->ara))
+ return PTR_ERR(alert->ara);
+
+ i2c_dev->alert = alert;
+
+ /* Enable SMBus Alert */
+ stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, STM32F7_I2C_CR1_ALERTEN);
+
+ return 0;
+}
+
+static void stm32f7_i2c_disable_smbus_alert(struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct stm32f7_i2c_alert *alert = i2c_dev->alert;
+ void __iomem *base = i2c_dev->base;
+
+ if (alert) {
+ /* Disable SMBus Alert */
+ stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1,
+ STM32F7_I2C_CR1_ALERTEN);
+ i2c_unregister_device(alert->ara);
+ }
+}
+
static u32 stm32f7_i2c_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SLAVE |
@@ -1918,7 +2075,7 @@ static u32 stm32f7_i2c_func(struct i2c_adapter *adap)
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_PEC |
- I2C_FUNC_SMBUS_I2C_BLOCK;
+ I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_HOST_NOTIFY;
}
static const struct i2c_algorithm stm32f7_i2c_algo = {
@@ -1927,6 +2084,8 @@ static const struct i2c_algorithm stm32f7_i2c_algo = {
.functionality = stm32f7_i2c_func,
.reg_slave = stm32f7_i2c_reg_slave,
.unreg_slave = stm32f7_i2c_unreg_slave,
+ .reg_hnotify_cli = stm32f7_i2c_reg_hnotify_client,
+ .unreg_hnotify_cli = stm32f7_i2c_unreg_hnotify_client,
};
static int stm32f7_i2c_probe(struct platform_device *pdev)
@@ -2088,6 +2247,16 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
if (ret)
goto pm_disable;
+ if (device_property_read_bool(&pdev->dev, "st,smbus-alert")) {
+ ret = stm32f7_i2c_enable_smbus_alert(i2c_dev);
+ if (ret) {
+ dev_err(i2c_dev->dev,
+ "failed to enable SMBus alert protocol (%d)\n",
+ ret);
+ goto i2c_adapter_remove;
+ }
+ }
+
dev_info(i2c_dev->dev, "STM32F7 I2C-%d bus adapter\n", adap->nr);
pm_runtime_mark_last_busy(i2c_dev->dev);
@@ -2095,6 +2264,9 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
return 0;
+i2c_adapter_remove:
+ i2c_del_adapter(adap);
+
pm_disable:
pm_runtime_put_noidle(i2c_dev->dev);
pm_runtime_disable(i2c_dev->dev);
@@ -2126,6 +2298,8 @@ static int stm32f7_i2c_remove(struct platform_device *pdev)
{
struct stm32f7_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+ stm32f7_i2c_disable_smbus_alert(i2c_dev);
+
i2c_del_adapter(&i2c_dev->adap);
pm_runtime_get_sync(i2c_dev->dev);
This patch adds the support for SMBus Host notify and SMBus Alert extensions protocols This patch introduces the st,smbus-alert binding in order to enable SMBus-Alert handling. Indeed, while the I2C/SMBUS framework already provide a mechanism to enable SMBus-Alert by naming an IRQ line "smbus_alert", on stm32 the SMBus-Alert is part of the i2c IRQ. Using the smbus_alert naming here would lead to having 2 handlers (the handler of the driver and the smbus_alert handler from I2C/SMBUS framework) on the unique i2c IRQ of the stm32. Meaning that the smbus_alert handler would get called for all IRQ generated by the stm32 I2C controller. Signed-off-by: Alain Volmat <alain.volmat@st.com> --- v2: adapt code to use reg_hnotify_cli / unreg_hnotify_cli instead of reg_client / unreg_client clarify commit message drivers/i2c/busses/Kconfig | 1 + drivers/i2c/busses/i2c-stm32f7.c | 194 +++++++++++++++++++++++++++++++++++++-- 2 files changed, 185 insertions(+), 10 deletions(-)