| Message ID | 1593793178-9737-2-git-send-email-yibin.gong@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add pca9450 driver | expand |
On 03.07.20 18:19, Robin Gong wrote: > Add NXP pca9450 pmic driver. > > Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> > --- > drivers/regulator/Kconfig | 8 + > drivers/regulator/Makefile | 1 + > drivers/regulator/pca9450-regulator.c | 843 ++++++++++++++++++++++++++++++++++ > include/linux/regulator/pca9450.h | 219 +++++++++ > 4 files changed, 1071 insertions(+) > create mode 100644 drivers/regulator/pca9450-regulator.c > create mode 100644 include/linux/regulator/pca9450.h > > diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig > index f60eeaa..f992a17 100644 > --- a/drivers/regulator/Kconfig > +++ b/drivers/regulator/Kconfig > @@ -740,6 +740,14 @@ config REGULATOR_PBIAS > This driver provides support for OMAP pbias modelled > regulators. > > +config REGULATOR_PCA9450 > + tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver" > + depends on I2C > + select REGMAP_I2C > + help > + Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC > + regulator driver. > + > config REGULATOR_PCAP > tristate "Motorola PCAP2 regulator driver" > depends on EZX_PCAP > diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile > index 5ce7350..ff524922 100644 > --- a/drivers/regulator/Makefile > +++ b/drivers/regulator/Makefile > @@ -94,6 +94,7 @@ obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o > obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o > obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o > obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o > +obj-$(CONFIG_REGULATOR_PCA9450) += pca9450-regulator.o > obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o > obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o > obj-$(CONFIG_REGULATOR_PV88080) += pv88080-regulator.o > diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c > new file mode 100644 > index 00000000..0225045 > --- /dev/null > +++ b/drivers/regulator/pca9450-regulator.c > @@ -0,0 +1,843 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright 2020 NXP. > + * NXP PCA9450 pmic driver > + */ > + > +#include <linux/err.h> > +#include <linux/i2c.h> > +#include <linux/interrupt.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > +#include <linux/regulator/driver.h> > +#include <linux/regulator/machine.h> > +#include <linux/regulator/of_regulator.h> > +#include <linux/regulator/pca9450.h> > + > +struct pc9450_dvs_config { > + unsigned int run_reg; /* dvs0 */ > + unsigned int run_mask; > + unsigned int standby_reg; /* dvs1 */ > + unsigned int standby_mask; > +}; > + > +struct pca9450_regulator_desc { > + struct regulator_desc desc; > + const struct pc9450_dvs_config dvs; > +}; > + > +struct pca9450 { > + struct device *dev; > + struct regmap *regmap; > + enum pca9450_chip_type type; > + unsigned int rcnt; > + int irq; > +}; > + > +static const struct regmap_range pca9450_status_range = { > + .range_min = PCA9450_REG_INT1, > + .range_max = PCA9450_REG_PWRON_STAT, > +}; > + > +static const struct regmap_access_table pca9450_volatile_regs = { > + .yes_ranges = &pca9450_status_range, > + .n_yes_ranges = 1, > +}; > + > +static const struct regmap_config pca9450_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > + .volatile_table = &pca9450_volatile_regs, > + .max_register = PCA9450_MAX_REGISTER - 1, > + .cache_type = REGCACHE_RBTREE, > +}; > + > +/* > + * BUCK1/2/3 > + * BUCK1RAM[1:0] BUCK1 DVS ramp rate setting > + * 00: 25mV/1usec > + * 01: 25mV/2usec > + * 10: 25mV/4usec > + * 11: 25mV/8usec > + */ > +static int pca9450_dvs_set_ramp_delay(struct regulator_dev *rdev, > + int ramp_delay) > +{ > + int id = rdev_get_id(rdev); > + unsigned int ramp_value; > + > + switch (ramp_delay) { > + case 1 ... 3125: > + ramp_value = BUCK1_RAMP_3P125MV; > + break; > + case 3126 ... 6250: > + ramp_value = BUCK1_RAMP_6P25MV; > + break; > + case 6251 ... 12500: > + ramp_value = BUCK1_RAMP_12P5MV; > + break; > + case 12501 ... 25000: > + ramp_value = BUCK1_RAMP_25MV; > + break; > + default: > + ramp_value = BUCK1_RAMP_25MV; > + } > + > + return regmap_update_bits(rdev->regmap, PCA9450_REG_BUCK1CTRL + id * 3, > + BUCK1_RAMP_MASK, ramp_value << 6); > +} > + > +static struct regulator_ops pca9450_dvs_buck_regulator_ops = { > + .enable = regulator_enable_regmap, > + .disable = regulator_disable_regmap, > + .is_enabled = regulator_is_enabled_regmap, > + .list_voltage = regulator_list_voltage_linear_range, > + .set_voltage_sel = regulator_set_voltage_sel_regmap, > + .get_voltage_sel = regulator_get_voltage_sel_regmap, > + .set_voltage_time_sel = regulator_set_voltage_time_sel, > + .set_ramp_delay = pca9450_dvs_set_ramp_delay, > +}; > + > +static struct regulator_ops pca9450_buck_regulator_ops = { > + .enable = regulator_enable_regmap, > + .disable = regulator_disable_regmap, > + .is_enabled = regulator_is_enabled_regmap, > + .list_voltage = regulator_list_voltage_linear_range, > + .set_voltage_sel = regulator_set_voltage_sel_regmap, > + .get_voltage_sel = regulator_get_voltage_sel_regmap, > + .set_voltage_time_sel = regulator_set_voltage_time_sel, > +}; > + > +static struct regulator_ops pca9450_ldo_regulator_ops = { > + .enable = regulator_enable_regmap, > + .disable = regulator_disable_regmap, > + .is_enabled = regulator_is_enabled_regmap, > + .list_voltage = regulator_list_voltage_linear_range, > + .set_voltage_sel = regulator_set_voltage_sel_regmap, > + .get_voltage_sel = regulator_get_voltage_sel_regmap, > +}; > + > +/* > + * BUCK1/2/3 > + * 0.60 to 2.1875V (12.5mV step) > + */ > +static const struct linear_range pca9450_dvs_buck_volts[] = { > + REGULATOR_LINEAR_RANGE(600000, 0x00, 0x7F, 12500), > +}; > + > +/* > + * BUCK4/5/6 > + * 0.6V to 3.4V (25mV step) > + */ > +static const struct linear_range pca9450_buck_volts[] = { > + REGULATOR_LINEAR_RANGE(600000, 0x00, 0x70, 25000), > + REGULATOR_LINEAR_RANGE(3400000, 0x71, 0x7F, 0), > +}; > + > +/* > + * LDO1 > + * 1.6 to 3.3V () > + */ > +static const struct linear_range pca9450_ldo1_volts[] = { > + REGULATOR_LINEAR_RANGE(1600000, 0x00, 0x03, 100000), > + REGULATOR_LINEAR_RANGE(3000000, 0x04, 0x07, 100000), > +}; > + > +/* > + * LDO2 > + * 0.8 to 1.15V (50mV step) > + */ > +static const struct linear_range pca9450_ldo2_volts[] = { > + REGULATOR_LINEAR_RANGE(800000, 0x00, 0x07, 50000), > +}; > + > +/* > + * LDO3/4 > + * 0.8 to 3.3V (100mV step) > + */ > +static const struct linear_range pca9450_ldo34_volts[] = { > + REGULATOR_LINEAR_RANGE(800000, 0x00, 0x19, 100000), > + REGULATOR_LINEAR_RANGE(3300000, 0x1A, 0x1F, 0), > +}; > + > +/* > + * LDO5 > + * 1.8 to 3.3V (100mV step) > + */ > +static const struct linear_range pca9450_ldo5_volts[] = { > + REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), > +}; > + > +static int buck_set_dvs(const struct regulator_desc *desc, > + struct device_node *np, struct regmap *regmap, > + char *prop, unsigned int reg, unsigned int mask) > +{ > + int ret, i; > + uint32_t uv; > + > + ret = of_property_read_u32(np, prop, &uv); > + if (ret == -EINVAL) > + return 0; > + else if (ret) > + return ret; > + > + for (i = 0; i < desc->n_voltages; i++) { > + ret = regulator_desc_list_voltage_linear_range(desc, i); > + if (ret < 0) > + continue; > + if (ret == uv) { > + i <<= ffs(desc->vsel_mask) - 1; > + ret = regmap_update_bits(regmap, reg, mask, i); > + break; > + } > + } > + > + return ret; > +} > + > +static int pca9450_set_dvs_levels(struct device_node *np, > + const struct regulator_desc *desc, > + struct regulator_config *cfg) > +{ > + struct pca9450_regulator_desc *data = container_of(desc, > + struct pca9450_regulator_desc, desc); > + const struct pc9450_dvs_config *dvs = &data->dvs; > + unsigned int reg, mask; > + char *prop; > + int i, ret = 0; > + > + for (i = 0; i < PCA9450_DVS_LEVEL_MAX; i++) { > + switch (i) { > + case PCA9450_DVS_LEVEL_RUN: > + prop = "nxp,dvs-run-voltage"; > + reg = dvs->run_reg; > + mask = dvs->run_mask; > + break; > + case PCA9450_DVS_LEVEL_STANDBY: > + prop = "nxp,dvs-standby-voltage"; > + reg = dvs->standby_reg; > + mask = dvs->standby_mask; > + break; > + default: > + return -EINVAL; > + } > + > + ret = buck_set_dvs(desc, np, cfg->regmap, prop, reg, mask); > + if (ret) > + break; > + } > + > + return ret; > +} > + > +static const struct pca9450_regulator_desc pca9450a_regulators[] = { > + { > + .desc = { > + .name = "buck1", > + .of_match = of_match_ptr("BUCK1"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_BUCK1, > + .ops = &pca9450_dvs_buck_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM, > + .linear_ranges = pca9450_dvs_buck_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), > + .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0, > + .vsel_mask = BUCK1OUT_DVS0_MASK, > + .enable_reg = PCA9450_REG_BUCK1CTRL, > + .enable_mask = BUCK1_ENMODE_MASK, > + .owner = THIS_MODULE, > + .of_parse_cb = pca9450_set_dvs_levels, > + }, > + .dvs = { > + .run_reg = PCA9450_REG_BUCK1OUT_DVS0, > + .run_mask = BUCK1OUT_DVS0_MASK, > + .standby_reg = PCA9450_REG_BUCK1OUT_DVS1, > + .standby_mask = BUCK1OUT_DVS1_MASK, > + }, > + }, > + { > + .desc = { > + .name = "buck2", > + .of_match = of_match_ptr("BUCK2"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_BUCK2, > + .ops = &pca9450_dvs_buck_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_BUCK2_VOLTAGE_NUM, > + .linear_ranges = pca9450_dvs_buck_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), > + .vsel_reg = PCA9450_REG_BUCK2OUT_DVS0, > + .vsel_mask = BUCK2OUT_DVS0_MASK, > + .enable_reg = PCA9450_REG_BUCK2CTRL, > + .enable_mask = BUCK1_ENMODE_MASK, > + .owner = THIS_MODULE, > + .of_parse_cb = pca9450_set_dvs_levels, > + }, > + .dvs = { > + .run_reg = PCA9450_REG_BUCK2OUT_DVS0, > + .run_mask = BUCK2OUT_DVS0_MASK, > + .standby_reg = PCA9450_REG_BUCK2OUT_DVS1, > + .standby_mask = BUCK2OUT_DVS1_MASK, > + }, > + }, > + { > + .desc = { > + .name = "buck3", > + .of_match = of_match_ptr("BUCK3"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_BUCK3, > + .ops = &pca9450_dvs_buck_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_BUCK3_VOLTAGE_NUM, > + .linear_ranges = pca9450_dvs_buck_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), > + .vsel_reg = PCA9450_REG_BUCK3OUT_DVS0, > + .vsel_mask = BUCK3OUT_DVS0_MASK, > + .enable_reg = PCA9450_REG_BUCK3CTRL, > + .enable_mask = BUCK3_ENMODE_MASK, > + .owner = THIS_MODULE, > + .of_parse_cb = pca9450_set_dvs_levels, > + }, > + .dvs = { > + .run_reg = PCA9450_REG_BUCK3OUT_DVS0, > + .run_mask = BUCK3OUT_DVS0_MASK, > + .standby_reg = PCA9450_REG_BUCK3OUT_DVS1, > + .standby_mask = BUCK3OUT_DVS1_MASK, > + }, > + }, > + { > + .desc = { > + .name = "buck4", > + .of_match = of_match_ptr("BUCK4"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_BUCK4, > + .ops = &pca9450_buck_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM, > + .linear_ranges = pca9450_buck_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), > + .vsel_reg = PCA9450_REG_BUCK4OUT, > + .vsel_mask = BUCK4OUT_MASK, > + .enable_reg = PCA9450_REG_BUCK4CTRL, > + .enable_mask = BUCK4_ENMODE_MASK, > + .owner = THIS_MODULE, > + }, > + }, > + { > + .desc = { > + .name = "buck5", > + .of_match = of_match_ptr("BUCK5"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_BUCK5, > + .ops = &pca9450_buck_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_BUCK5_VOLTAGE_NUM, > + .linear_ranges = pca9450_buck_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), > + .vsel_reg = PCA9450_REG_BUCK5OUT, > + .vsel_mask = BUCK5OUT_MASK, > + .enable_reg = PCA9450_REG_BUCK5CTRL, > + .enable_mask = BUCK5_ENMODE_MASK, > + .owner = THIS_MODULE, > + }, > + }, > + { > + .desc = { > + .name = "buck6", > + .of_match = of_match_ptr("BUCK6"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_BUCK6, > + .ops = &pca9450_buck_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_BUCK6_VOLTAGE_NUM, > + .linear_ranges = pca9450_buck_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), > + .vsel_reg = PCA9450_REG_BUCK6OUT, > + .vsel_mask = BUCK6OUT_MASK, > + .enable_reg = PCA9450_REG_BUCK6CTRL, > + .enable_mask = BUCK6_ENMODE_MASK, > + .owner = THIS_MODULE, > + }, > + }, > + { > + .desc = { > + .name = "ldo1", > + .of_match = of_match_ptr("LDO1"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_LDO1, > + .ops = &pca9450_ldo_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_LDO1_VOLTAGE_NUM, > + .linear_ranges = pca9450_ldo1_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts), > + .vsel_reg = PCA9450_REG_LDO1CTRL, > + .vsel_mask = LDO1OUT_MASK, > + .enable_reg = PCA9450_REG_LDO1CTRL, > + .enable_mask = LDO1_EN_MASK, > + .owner = THIS_MODULE, > + }, > + }, > + { > + .desc = { > + .name = "ldo2", > + .of_match = of_match_ptr("LDO2"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_LDO2, > + .ops = &pca9450_ldo_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_LDO2_VOLTAGE_NUM, > + .linear_ranges = pca9450_ldo2_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo2_volts), > + .vsel_reg = PCA9450_REG_LDO2CTRL, > + .vsel_mask = LDO2OUT_MASK, > + .enable_reg = PCA9450_REG_LDO2CTRL, > + .enable_mask = LDO2_EN_MASK, > + .owner = THIS_MODULE, > + }, > + }, > + { > + .desc = { > + .name = "ldo3", > + .of_match = of_match_ptr("LDO3"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_LDO3, > + .ops = &pca9450_ldo_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_LDO3_VOLTAGE_NUM, > + .linear_ranges = pca9450_ldo34_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), > + .vsel_reg = PCA9450_REG_LDO3CTRL, > + .vsel_mask = LDO3OUT_MASK, > + .enable_reg = PCA9450_REG_LDO3CTRL, > + .enable_mask = LDO3_EN_MASK, > + .owner = THIS_MODULE, > + }, > + }, > + { > + .desc = { > + .name = "ldo4", > + .of_match = of_match_ptr("LDO4"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_LDO4, > + .ops = &pca9450_ldo_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_LDO4_VOLTAGE_NUM, > + .linear_ranges = pca9450_ldo34_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), > + .vsel_reg = PCA9450_REG_LDO4CTRL, > + .vsel_mask = LDO4OUT_MASK, > + .enable_reg = PCA9450_REG_LDO4CTRL, > + .enable_mask = LDO4_EN_MASK, > + .owner = THIS_MODULE, > + }, > + }, > + { > + .desc = { > + .name = "ldo5", > + .of_match = of_match_ptr("LDO5"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_LDO5, > + .ops = &pca9450_ldo_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_LDO5_VOLTAGE_NUM, > + .linear_ranges = pca9450_ldo5_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts), > + .vsel_reg = PCA9450_REG_LDO5CTRL_H, > + .vsel_mask = LDO5HOUT_MASK, > + .enable_reg = PCA9450_REG_LDO5CTRL_H, > + .enable_mask = LDO5H_EN_MASK, > + .owner = THIS_MODULE, > + }, > + }, > +}; > + > +/* > + * Buck3 removed on PCA9450B and connected with Buck1 internal for dual phase > + * on PCA9450C as no Buck3. > + */ > +static const struct pca9450_regulator_desc pca9450bc_regulators[] = { > + { > + .desc = { > + .name = "buck1", > + .of_match = of_match_ptr("BUCK1"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_BUCK1, > + .ops = &pca9450_dvs_buck_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM, > + .linear_ranges = pca9450_dvs_buck_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), > + .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0, > + .vsel_mask = BUCK1OUT_DVS0_MASK, > + .enable_reg = PCA9450_REG_BUCK1CTRL, > + .enable_mask = BUCK1_ENMODE_MASK, > + .owner = THIS_MODULE, > + .of_parse_cb = pca9450_set_dvs_levels, > + }, > + .dvs = { > + .run_reg = PCA9450_REG_BUCK1OUT_DVS0, > + .run_mask = BUCK1OUT_DVS0_MASK, > + .standby_reg = PCA9450_REG_BUCK1OUT_DVS1, > + .standby_mask = BUCK1OUT_DVS1_MASK, > + }, > + }, > + { > + .desc = { > + .name = "buck2", > + .of_match = of_match_ptr("BUCK2"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_BUCK2, > + .ops = &pca9450_dvs_buck_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_BUCK2_VOLTAGE_NUM, > + .linear_ranges = pca9450_dvs_buck_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), > + .vsel_reg = PCA9450_REG_BUCK2OUT_DVS0, > + .vsel_mask = BUCK2OUT_DVS0_MASK, > + .enable_reg = PCA9450_REG_BUCK2CTRL, > + .enable_mask = BUCK1_ENMODE_MASK, > + .owner = THIS_MODULE, > + .of_parse_cb = pca9450_set_dvs_levels, > + }, > + .dvs = { > + .run_reg = PCA9450_REG_BUCK2OUT_DVS0, > + .run_mask = BUCK2OUT_DVS0_MASK, > + .standby_reg = PCA9450_REG_BUCK2OUT_DVS1, > + .standby_mask = BUCK2OUT_DVS1_MASK, > + }, > + }, > + { > + .desc = { > + .name = "buck4", > + .of_match = of_match_ptr("BUCK4"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_BUCK4, > + .ops = &pca9450_buck_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM, > + .linear_ranges = pca9450_buck_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), > + .vsel_reg = PCA9450_REG_BUCK4OUT, > + .vsel_mask = BUCK4OUT_MASK, > + .enable_reg = PCA9450_REG_BUCK4CTRL, > + .enable_mask = BUCK4_ENMODE_MASK, > + .owner = THIS_MODULE, > + }, > + }, > + { > + .desc = { > + .name = "buck5", > + .of_match = of_match_ptr("BUCK5"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_BUCK5, > + .ops = &pca9450_buck_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_BUCK5_VOLTAGE_NUM, > + .linear_ranges = pca9450_buck_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), > + .vsel_reg = PCA9450_REG_BUCK5OUT, > + .vsel_mask = BUCK5OUT_MASK, > + .enable_reg = PCA9450_REG_BUCK5CTRL, > + .enable_mask = BUCK5_ENMODE_MASK, > + .owner = THIS_MODULE, > + }, > + }, > + { > + .desc = { > + .name = "buck6", > + .of_match = of_match_ptr("BUCK6"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_BUCK6, > + .ops = &pca9450_buck_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_BUCK6_VOLTAGE_NUM, > + .linear_ranges = pca9450_buck_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), > + .vsel_reg = PCA9450_REG_BUCK6OUT, > + .vsel_mask = BUCK6OUT_MASK, > + .enable_reg = PCA9450_REG_BUCK6CTRL, > + .enable_mask = BUCK6_ENMODE_MASK, > + .owner = THIS_MODULE, > + }, > + }, > + { > + .desc = { > + .name = "ldo1", > + .of_match = of_match_ptr("LDO1"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_LDO1, > + .ops = &pca9450_ldo_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_LDO1_VOLTAGE_NUM, > + .linear_ranges = pca9450_ldo1_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts), > + .vsel_reg = PCA9450_REG_LDO1CTRL, > + .vsel_mask = LDO1OUT_MASK, > + .enable_reg = PCA9450_REG_LDO1CTRL, > + .enable_mask = LDO1_EN_MASK, > + .owner = THIS_MODULE, > + }, > + }, > + { > + .desc = { > + .name = "ldo2", > + .of_match = of_match_ptr("LDO2"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_LDO2, > + .ops = &pca9450_ldo_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_LDO2_VOLTAGE_NUM, > + .linear_ranges = pca9450_ldo2_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo2_volts), > + .vsel_reg = PCA9450_REG_LDO2CTRL, > + .vsel_mask = LDO2OUT_MASK, > + .enable_reg = PCA9450_REG_LDO2CTRL, > + .enable_mask = LDO2_EN_MASK, > + .owner = THIS_MODULE, > + }, > + }, > + { > + .desc = { > + .name = "ldo3", > + .of_match = of_match_ptr("LDO3"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_LDO3, > + .ops = &pca9450_ldo_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_LDO3_VOLTAGE_NUM, > + .linear_ranges = pca9450_ldo34_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), > + .vsel_reg = PCA9450_REG_LDO3CTRL, > + .vsel_mask = LDO3OUT_MASK, > + .enable_reg = PCA9450_REG_LDO3CTRL, > + .enable_mask = LDO3_EN_MASK, > + .owner = THIS_MODULE, > + }, > + }, > + { > + .desc = { > + .name = "ldo4", > + .of_match = of_match_ptr("LDO4"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_LDO4, > + .ops = &pca9450_ldo_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_LDO4_VOLTAGE_NUM, > + .linear_ranges = pca9450_ldo34_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), > + .vsel_reg = PCA9450_REG_LDO4CTRL, > + .vsel_mask = LDO4OUT_MASK, > + .enable_reg = PCA9450_REG_LDO4CTRL, > + .enable_mask = LDO4_EN_MASK, > + .owner = THIS_MODULE, > + }, > + }, > + { > + .desc = { > + .name = "ldo5", > + .of_match = of_match_ptr("LDO5"), > + .regulators_node = of_match_ptr("regulators"), > + .id = PCA9450_LDO5, > + .ops = &pca9450_ldo_regulator_ops, > + .type = REGULATOR_VOLTAGE, > + .n_voltages = PCA9450_LDO5_VOLTAGE_NUM, > + .linear_ranges = pca9450_ldo5_volts, > + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts), > + .vsel_reg = PCA9450_REG_LDO5CTRL_H, > + .vsel_mask = LDO5HOUT_MASK, > + .enable_reg = PCA9450_REG_LDO5CTRL_H, > + .enable_mask = LDO5H_EN_MASK, > + .owner = THIS_MODULE, > + }, > + }, > +}; > + > +static irqreturn_t pca9450_irq_handler(int irq, void *data) > +{ > + struct pca9450 *pca9450 = data; > + struct regmap *regmap = pca9450->regmap; > + unsigned int status; > + int ret; > + > + ret = regmap_read(regmap, PCA9450_REG_INT1, &status); > + if (ret < 0) { > + dev_err(pca9450->dev, > + "Failed to read INT1(%d)\n", ret); > + return IRQ_NONE; > + } > + > + if (status & IRQ_PWRON) > + dev_warn(pca9450->dev, "PWRON interrupt.\n"); > + > + if (status & IRQ_WDOGB) > + dev_warn(pca9450->dev, "WDOGB interrupt.\n"); > + > + if (status & IRQ_VR_FLT1) > + dev_warn(pca9450->dev, "VRFLT1 interrupt.\n"); > + > + if (status & IRQ_VR_FLT2) > + dev_warn(pca9450->dev, "VRFLT2 interrupt.\n"); > + > + if (status & IRQ_LOWVSYS) > + dev_warn(pca9450->dev, "LOWVSYS interrupt.\n"); > + > + if (status & IRQ_THERM_105) > + dev_warn(pca9450->dev, "IRQ_THERM_105 interrupt.\n"); > + > + if (status & IRQ_THERM_125) > + dev_warn(pca9450->dev, "IRQ_THERM_125 interrupt.\n"); > + > + return IRQ_HANDLED; > +} > + > +static int pca9450_i2c_probe(struct i2c_client *i2c, > + const struct i2c_device_id *id) > +{ > + enum pca9450_chip_type type = (unsigned int)(uintptr_t) > + of_device_get_match_data(&i2c->dev); > + const struct pca9450_regulator_desc *regulator_desc; > + struct regulator_config config = { }; > + struct pca9450 *pca9450; > + unsigned int device_id, i; > + int ret; > + > + if (!i2c->irq) { > + dev_err(&i2c->dev, "No IRQ configured?\n"); > + return -EINVAL; > + } > + > + pca9450 = devm_kzalloc(&i2c->dev, sizeof(struct pca9450), GFP_KERNEL); > + if (!pca9450) > + return -ENOMEM; > + > + switch (type) { > + case PCA9450_TYPE_PCA9450A: > + regulator_desc = pca9450a_regulators; > + pca9450->rcnt = ARRAY_SIZE(pca9450a_regulators); > + break; > + case PCA9450_TYPE_PCA9450BC: > + regulator_desc = pca9450bc_regulators; > + pca9450->rcnt = ARRAY_SIZE(pca9450bc_regulators); > + break; > + default: > + dev_err(&i2c->dev, "Unknown device type"); > + return -EINVAL; > + } > + > + pca9450->irq = i2c->irq; > + pca9450->type = type; > + pca9450->dev = &i2c->dev; > + > + dev_set_drvdata(&i2c->dev, pca9450); > + > + pca9450->regmap = devm_regmap_init_i2c(i2c, > + &pca9450_regmap_config); > + if (IS_ERR(pca9450->regmap)) { > + dev_err(&i2c->dev, "regmap initialization failed\n"); > + return PTR_ERR(pca9450->regmap); > + } > + > + ret = regmap_read(pca9450->regmap, PCA9450_REG_DEV_ID, &device_id); > + if (ret) { > + dev_err(&i2c->dev, "Read device id error\n"); > + return ret; > + } > + > + /* Check your board and dts for match the right pmic */ > + if (((device_id >> 4) != 0x1 && type == PCA9450_TYPE_PCA9450A) || > + ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC)) { > + dev_err(&i2c->dev, "Device id(%x) mismatched\n", > + device_id >> 4); > + return -EINVAL; > + } > + > + for (i = 0; i < pca9450->rcnt; i++) { > + const struct regulator_desc *desc; > + struct regulator_dev *rdev; > + const struct pca9450_regulator_desc *r; > + > + r = ®ulator_desc[i]; > + desc = &r->desc; > + > + config.regmap = pca9450->regmap; > + config.dev = pca9450->dev; > + > + rdev = devm_regulator_register(pca9450->dev, desc, &config); > + if (IS_ERR(rdev)) { > + ret = PTR_ERR(rdev); > + dev_err(pca9450->dev, > + "Failed to register regulator(%s): %d\n", > + desc->name, ret); > + return ret; > + } > + } > + > + ret = devm_request_threaded_irq(pca9450->dev, pca9450->irq, NULL, > + pca9450_irq_handler, > + (IRQF_TRIGGER_FALLING | IRQF_ONESHOT), > + "pca9450-irq", pca9450); > + if (ret != 0) { > + dev_err(pca9450->dev, "Failed to request IRQ: %d\n", > + pca9450->irq); > + return ret; > + } > + /* Unmask all interrupt except PWRON/WDOG/RSVD */ > + ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_INT1_MSK, > + IRQ_VR_FLT1 | IRQ_VR_FLT2 | IRQ_LOWVSYS | > + IRQ_THERM_105 | IRQ_THERM_125, > + IRQ_PWRON | IRQ_WDOGB | IRQ_RSVD); > + if (ret) { > + dev_err(&i2c->dev, "Unmask irq error\n"); > + return ret; > + } > + > + dev_info(&i2c->dev, "%s probed.\n", > + type == PCA9450_TYPE_PCA9450A ? "pca9450a" : "pca9450bc"); > + > + return 0; > +} > + > +static const struct of_device_id pca9450_of_match[] = { > + { > + .compatible = "nxp,pca9450a", > + .data = (void *)PCA9450_TYPE_PCA9450A, > + }, > + { > + .compatible = "nxp,pca9450b", > + .data = (void *)PCA9450_TYPE_PCA9450BC, > + }, > + { > + .compatible = "nxp,pca9450c", > + .data = (void *)PCA9450_TYPE_PCA9450BC, > + }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, pca9450_of_match); > + > +static struct i2c_driver pca9450_i2c_driver = { > + .driver = { > + .name = "nxp-pca9450", > + .of_match_table = pca9450_of_match, > + }, > + .probe = pca9450_i2c_probe, > +}; > + > +static int __init pca9450_i2c_init(void) > +{ > + return i2c_add_driver(&pca9450_i2c_driver); > +} > +module_init(pca9450_i2c_init); > + > +static void __exit pca9450_i2c_exit(void) > +{ > + i2c_del_driver(&pca9450_i2c_driver); > +} > +module_exit(pca9450_i2c_exit); > + > +MODULE_AUTHOR("Robin Gong <yibin.gong@nxp.com>"); > +MODULE_DESCRIPTION("NXP PCA9450 Power Management IC driver"); > +MODULE_LICENSE("GPL"); > diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h > new file mode 100644 > index 00000000..1bbd301 > --- /dev/null > +++ b/include/linux/regulator/pca9450.h > @@ -0,0 +1,219 @@ > +/* SPDX-License-Identifier: GPL-2.0-or-later */ > +/* Copyright 2020 NXP. */ > + > +#ifndef __LINUX_REG_PCA9450_H__ > +#define __LINUX_REG_PCA9450_H__ > + > +#include <linux/regmap.h> > + > +enum pca9450_chip_type { > + PCA9450_TYPE_PCA9450A = 0, > + PCA9450_TYPE_PCA9450BC, > + PCA9450_TYPE_AMOUNT, > +}; > + > +enum { > + PCA9450_BUCK1 = 0, > + PCA9450_BUCK2, > + PCA9450_BUCK3, > + PCA9450_BUCK4, > + PCA9450_BUCK5, > + PCA9450_BUCK6, > + PCA9450_LDO1, > + PCA9450_LDO2, > + PCA9450_LDO3, > + PCA9450_LDO4, > + PCA9450_LDO5, > + PCA9450_REGULATOR_CNT, > +}; > + > +enum { > + PCA9450_DVS_LEVEL_RUN = 0, > + PCA9450_DVS_LEVEL_STANDBY, > + PCA9450_DVS_LEVEL_MAX, > +}; > + > +#define PCA9450_BUCK1_VOLTAGE_NUM 0x80 > +#define PCA9450_BUCK2_VOLTAGE_NUM 0x80 > +#define PCA9450_BUCK3_VOLTAGE_NUM 0x80 > +#define PCA9450_BUCK4_VOLTAGE_NUM 0x80 > + > +#define PCA9450_BUCK5_VOLTAGE_NUM 0x80 > +#define PCA9450_BUCK6_VOLTAGE_NUM 0x80 > + > +#define PCA9450_LDO1_VOLTAGE_NUM 0x08 > +#define PCA9450_LDO2_VOLTAGE_NUM 0x08 > +#define PCA9450_LDO3_VOLTAGE_NUM 0x20 > +#define PCA9450_LDO4_VOLTAGE_NUM 0x20 > +#define PCA9450_LDO5_VOLTAGE_NUM 0x10 > + > +enum { > + PCA9450_REG_DEV_ID = 0x00, > + PCA9450_REG_INT1 = 0x01, > + PCA9450_REG_INT1_MSK = 0x02, > + PCA9450_REG_STATUS1 = 0x03, > + PCA9450_REG_STATUS2 = 0x04, > + PCA9450_REG_PWRON_STAT = 0x05, > + PCA9450_REG_SWRST = 0x06, > + PCA9450_REG_PWRCTRL = 0x07, > + PCA9450_REG_RESET_CTRL = 0x08, > + PCA9450_REG_CONFIG1 = 0x09, > + PCA9450_REG_CONFIG2 = 0x0A, > + PCA9450_REG_BUCK123_DVS = 0x0C, > + PCA9450_REG_BUCK1OUT_LIMIT = 0x0D, > + PCA9450_REG_BUCK2OUT_LIMIT = 0x0E, > + PCA9450_REG_BUCK3OUT_LIMIT = 0x0F, > + PCA9450_REG_BUCK1CTRL = 0x10, > + PCA9450_REG_BUCK1OUT_DVS0 = 0x11, > + PCA9450_REG_BUCK1OUT_DVS1 = 0x12, > + PCA9450_REG_BUCK2CTRL = 0x13, > + PCA9450_REG_BUCK2OUT_DVS0 = 0x14, > + PCA9450_REG_BUCK2OUT_DVS1 = 0x15, > + PCA9450_REG_BUCK3CTRL = 0x16, > + PCA9450_REG_BUCK3OUT_DVS0 = 0x17, > + PCA9450_REG_BUCK3OUT_DVS1 = 0x18, > + PCA9450_REG_BUCK4CTRL = 0x19, > + PCA9450_REG_BUCK4OUT = 0x1A, > + PCA9450_REG_BUCK5CTRL = 0x1B, > + PCA9450_REG_BUCK5OUT = 0x1C, > + PCA9450_REG_BUCK6CTRL = 0x1D, > + PCA9450_REG_BUCK6OUT = 0x1E, > + PCA9450_REG_LDO_AD_CTRL = 0x20, > + PCA9450_REG_LDO1CTRL = 0x21, > + PCA9450_REG_LDO2CTRL = 0x22, > + PCA9450_REG_LDO3CTRL = 0x23, > + PCA9450_REG_LDO4CTRL = 0x24, > + PCA9450_REG_LDO5CTRL_L = 0x25, > + PCA9450_REG_LDO5CTRL_H = 0x26, > + PCA9450_REG_LOADSW_CTRL = 0x2A, > + PCA9450_REG_VRFLT1_STS = 0x2B, > + PCA9450_REG_VRFLT2_STS = 0x2C, > + PCA9450_REG_VRFLT1_MASK = 0x2D, > + PCA9450_REG_VRFLT2_MASK = 0x2E, > + PCA9450_MAX_REGISTER = 0x2F, > +}; > + > +/* PCA9450 BUCK ENMODE bits */ > +#define BUCK_ENMODE_OFF 0x00 > +#define BUCK_ENMODE_ONREQ 0x01 > +#define BUCK_ENMODE_ONREQ_STBYREQ 0x02 > +#define BUCK_ENMODE_ON 0x03 > + > +/* PCA9450_REG_BUCK1_CTRL bits */ > +#define BUCK1_RAMP_MASK 0xC0 > +#define BUCK1_RAMP_25MV 0x0 > +#define BUCK1_RAMP_12P5MV 0x1 > +#define BUCK1_RAMP_6P25MV 0x2 > +#define BUCK1_RAMP_3P125MV 0x3 > +#define BUCK1_DVS_CTRL 0x10 > +#define BUCK1_AD 0x08 > +#define BUCK1_FPWM 0x04 > +#define BUCK1_ENMODE_MASK 0x03 > + > +/* PCA9450_REG_BUCK2_CTRL bits */ > +#define BUCK2_RAMP_MASK 0xC0 > +#define BUCK2_RAMP_25MV 0x0 > +#define BUCK2_RAMP_12P5MV 0x1 > +#define BUCK2_RAMP_6P25MV 0x2 > +#define BUCK2_RAMP_3P125MV 0x3 > +#define BUCK2_DVS_CTRL 0x10 > +#define BUCK2_AD 0x08 > +#define BUCK2_FPWM 0x04 > +#define BUCK2_ENMODE_MASK 0x03 > + > +/* PCA9450_REG_BUCK3_CTRL bits */ > +#define BUCK3_RAMP_MASK 0xC0 > +#define BUCK3_RAMP_25MV 0x0 > +#define BUCK3_RAMP_12P5MV 0x1 > +#define BUCK3_RAMP_6P25MV 0x2 > +#define BUCK3_RAMP_3P125MV 0x3 > +#define BUCK3_DVS_CTRL 0x10 > +#define BUCK3_AD 0x08 > +#define BUCK3_FPWM 0x04 > +#define BUCK3_ENMODE_MASK 0x03 > + > +/* PCA9450_REG_BUCK4_CTRL bits */ > +#define BUCK4_AD 0x08 > +#define BUCK4_FPWM 0x04 > +#define BUCK4_ENMODE_MASK 0x03 > + > +/* PCA9450_REG_BUCK5_CTRL bits */ > +#define BUCK5_AD 0x08 > +#define BUCK5_FPWM 0x04 > +#define BUCK5_ENMODE_MASK 0x03 > + > +/* PCA9450_REG_BUCK6_CTRL bits */ > +#define BUCK6_AD 0x08 > +#define BUCK6_FPWM 0x04 > +#define BUCK6_ENMODE_MASK 0x03 > + > +/* PCA9450_BUCK1OUT_DVS0 bits */ > +#define BUCK1OUT_DVS0_MASK 0x7F > +#define BUCK1OUT_DVS0_DEFAULT 0x14 > + > +/* PCA9450_BUCK1OUT_DVS1 bits */ > +#define BUCK1OUT_DVS1_MASK 0x7F > +#define BUCK1OUT_DVS1_DEFAULT 0x14 > + > +/* PCA9450_BUCK2OUT_DVS0 bits */ > +#define BUCK2OUT_DVS0_MASK 0x7F > +#define BUCK2OUT_DVS0_DEFAULT 0x14 > + > +/* PCA9450_BUCK2OUT_DVS1 bits */ > +#define BUCK2OUT_DVS1_MASK 0x7F > +#define BUCK2OUT_DVS1_DEFAULT 0x14 > + > +/* PCA9450_BUCK3OUT_DVS0 bits */ > +#define BUCK3OUT_DVS0_MASK 0x7F > +#define BUCK3OUT_DVS0_DEFAULT 0x14 > + > +/* PCA9450_BUCK3OUT_DVS1 bits */ > +#define BUCK3OUT_DVS1_MASK 0x7F > +#define BUCK3OUT_DVS1_DEFAULT 0x14 > + > +/* PCA9450_REG_BUCK4OUT bits */ > +#define BUCK4OUT_MASK 0x7F > +#define BUCK4OUT_DEFAULT 0x6C > + > +/* PCA9450_REG_BUCK5OUT bits */ > +#define BUCK5OUT_MASK 0x7F > +#define BUCK5OUT_DEFAULT 0x30 > + > +/* PCA9450_REG_BUCK6OUT bits */ > +#define BUCK6OUT_MASK 0x7F > +#define BUCK6OUT_DEFAULT 0x14 > + > +/* PCA9450_REG_LDO1_VOLT bits */ > +#define LDO1_EN_MASK 0xC0 > +#define LDO1OUT_MASK 0x07 > + > +/* PCA9450_REG_LDO2_VOLT bits */ > +#define LDO2_EN_MASK 0xC0 > +#define LDO2OUT_MASK 0x07 > + > +/* PCA9450_REG_LDO3_VOLT bits */ > +#define LDO3_EN_MASK 0xC0 > +#define LDO3OUT_MASK 0x0F > + > +/* PCA9450_REG_LDO4_VOLT bits */ > +#define LDO4_EN_MASK 0xC0 > +#define LDO4OUT_MASK 0x0F > + > +/* PCA9450_REG_LDO5_VOLT bits */ > +#define LDO5L_EN_MASK 0xC0 > +#define LDO5LOUT_MASK 0x0F > + > +#define LDO5H_EN_MASK 0xC0 > +#define LDO5HOUT_MASK 0x0F > + > +/* PCA9450_REG_IRQ bits */ > +#define IRQ_PWRON 0x80 > +#define IRQ_WDOGB 0x40 > +#define IRQ_RSVD 0x20 > +#define IRQ_VR_FLT1 0x10 > +#define IRQ_VR_FLT2 0x08 > +#define IRQ_LOWVSYS 0x04 > +#define IRQ_THERM_105 0x02 > +#define IRQ_THERM_125 0x01 > + > +#endif /* __LINUX_REG_PCA9450_H__ */ >
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index f60eeaa..f992a17 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -740,6 +740,14 @@ config REGULATOR_PBIAS This driver provides support for OMAP pbias modelled regulators. +config REGULATOR_PCA9450 + tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver" + depends on I2C + select REGMAP_I2C + help + Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC + regulator driver. + config REGULATOR_PCAP tristate "Motorola PCAP2 regulator driver" depends on EZX_PCAP diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 5ce7350..ff524922 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -94,6 +94,7 @@ obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o +obj-$(CONFIG_REGULATOR_PCA9450) += pca9450-regulator.o obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o obj-$(CONFIG_REGULATOR_PV88080) += pv88080-regulator.o diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c new file mode 100644 index 00000000..0225045 --- /dev/null +++ b/drivers/regulator/pca9450-regulator.c @@ -0,0 +1,843 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020 NXP. + * NXP PCA9450 pmic driver + */ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include <linux/regulator/pca9450.h> + +struct pc9450_dvs_config { + unsigned int run_reg; /* dvs0 */ + unsigned int run_mask; + unsigned int standby_reg; /* dvs1 */ + unsigned int standby_mask; +}; + +struct pca9450_regulator_desc { + struct regulator_desc desc; + const struct pc9450_dvs_config dvs; +}; + +struct pca9450 { + struct device *dev; + struct regmap *regmap; + enum pca9450_chip_type type; + unsigned int rcnt; + int irq; +}; + +static const struct regmap_range pca9450_status_range = { + .range_min = PCA9450_REG_INT1, + .range_max = PCA9450_REG_PWRON_STAT, +}; + +static const struct regmap_access_table pca9450_volatile_regs = { + .yes_ranges = &pca9450_status_range, + .n_yes_ranges = 1, +}; + +static const struct regmap_config pca9450_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_table = &pca9450_volatile_regs, + .max_register = PCA9450_MAX_REGISTER - 1, + .cache_type = REGCACHE_RBTREE, +}; + +/* + * BUCK1/2/3 + * BUCK1RAM[1:0] BUCK1 DVS ramp rate setting + * 00: 25mV/1usec + * 01: 25mV/2usec + * 10: 25mV/4usec + * 11: 25mV/8usec + */ +static int pca9450_dvs_set_ramp_delay(struct regulator_dev *rdev, + int ramp_delay) +{ + int id = rdev_get_id(rdev); + unsigned int ramp_value; + + switch (ramp_delay) { + case 1 ... 3125: + ramp_value = BUCK1_RAMP_3P125MV; + break; + case 3126 ... 6250: + ramp_value = BUCK1_RAMP_6P25MV; + break; + case 6251 ... 12500: + ramp_value = BUCK1_RAMP_12P5MV; + break; + case 12501 ... 25000: + ramp_value = BUCK1_RAMP_25MV; + break; + default: + ramp_value = BUCK1_RAMP_25MV; + } + + return regmap_update_bits(rdev->regmap, PCA9450_REG_BUCK1CTRL + id * 3, + BUCK1_RAMP_MASK, ramp_value << 6); +} + +static struct regulator_ops pca9450_dvs_buck_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = pca9450_dvs_set_ramp_delay, +}; + +static struct regulator_ops pca9450_buck_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, +}; + +static struct regulator_ops pca9450_ldo_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +/* + * BUCK1/2/3 + * 0.60 to 2.1875V (12.5mV step) + */ +static const struct linear_range pca9450_dvs_buck_volts[] = { + REGULATOR_LINEAR_RANGE(600000, 0x00, 0x7F, 12500), +}; + +/* + * BUCK4/5/6 + * 0.6V to 3.4V (25mV step) + */ +static const struct linear_range pca9450_buck_volts[] = { + REGULATOR_LINEAR_RANGE(600000, 0x00, 0x70, 25000), + REGULATOR_LINEAR_RANGE(3400000, 0x71, 0x7F, 0), +}; + +/* + * LDO1 + * 1.6 to 3.3V () + */ +static const struct linear_range pca9450_ldo1_volts[] = { + REGULATOR_LINEAR_RANGE(1600000, 0x00, 0x03, 100000), + REGULATOR_LINEAR_RANGE(3000000, 0x04, 0x07, 100000), +}; + +/* + * LDO2 + * 0.8 to 1.15V (50mV step) + */ +static const struct linear_range pca9450_ldo2_volts[] = { + REGULATOR_LINEAR_RANGE(800000, 0x00, 0x07, 50000), +}; + +/* + * LDO3/4 + * 0.8 to 3.3V (100mV step) + */ +static const struct linear_range pca9450_ldo34_volts[] = { + REGULATOR_LINEAR_RANGE(800000, 0x00, 0x19, 100000), + REGULATOR_LINEAR_RANGE(3300000, 0x1A, 0x1F, 0), +}; + +/* + * LDO5 + * 1.8 to 3.3V (100mV step) + */ +static const struct linear_range pca9450_ldo5_volts[] = { + REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), +}; + +static int buck_set_dvs(const struct regulator_desc *desc, + struct device_node *np, struct regmap *regmap, + char *prop, unsigned int reg, unsigned int mask) +{ + int ret, i; + uint32_t uv; + + ret = of_property_read_u32(np, prop, &uv); + if (ret == -EINVAL) + return 0; + else if (ret) + return ret; + + for (i = 0; i < desc->n_voltages; i++) { + ret = regulator_desc_list_voltage_linear_range(desc, i); + if (ret < 0) + continue; + if (ret == uv) { + i <<= ffs(desc->vsel_mask) - 1; + ret = regmap_update_bits(regmap, reg, mask, i); + break; + } + } + + return ret; +} + +static int pca9450_set_dvs_levels(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *cfg) +{ + struct pca9450_regulator_desc *data = container_of(desc, + struct pca9450_regulator_desc, desc); + const struct pc9450_dvs_config *dvs = &data->dvs; + unsigned int reg, mask; + char *prop; + int i, ret = 0; + + for (i = 0; i < PCA9450_DVS_LEVEL_MAX; i++) { + switch (i) { + case PCA9450_DVS_LEVEL_RUN: + prop = "nxp,dvs-run-voltage"; + reg = dvs->run_reg; + mask = dvs->run_mask; + break; + case PCA9450_DVS_LEVEL_STANDBY: + prop = "nxp,dvs-standby-voltage"; + reg = dvs->standby_reg; + mask = dvs->standby_mask; + break; + default: + return -EINVAL; + } + + ret = buck_set_dvs(desc, np, cfg->regmap, prop, reg, mask); + if (ret) + break; + } + + return ret; +} + +static const struct pca9450_regulator_desc pca9450a_regulators[] = { + { + .desc = { + .name = "buck1", + .of_match = of_match_ptr("BUCK1"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK1, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM, + .linear_ranges = pca9450_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0, + .vsel_mask = BUCK1OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK1CTRL, + .enable_mask = BUCK1_ENMODE_MASK, + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK1OUT_DVS0, + .run_mask = BUCK1OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK1OUT_DVS1, + .standby_mask = BUCK1OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck2", + .of_match = of_match_ptr("BUCK2"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK2, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK2_VOLTAGE_NUM, + .linear_ranges = pca9450_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK2OUT_DVS0, + .vsel_mask = BUCK2OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK2CTRL, + .enable_mask = BUCK1_ENMODE_MASK, + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK2OUT_DVS0, + .run_mask = BUCK2OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK2OUT_DVS1, + .standby_mask = BUCK2OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck3", + .of_match = of_match_ptr("BUCK3"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK3, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK3_VOLTAGE_NUM, + .linear_ranges = pca9450_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK3OUT_DVS0, + .vsel_mask = BUCK3OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK3CTRL, + .enable_mask = BUCK3_ENMODE_MASK, + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK3OUT_DVS0, + .run_mask = BUCK3OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK3OUT_DVS1, + .standby_mask = BUCK3OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck4", + .of_match = of_match_ptr("BUCK4"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK4, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK4OUT, + .vsel_mask = BUCK4OUT_MASK, + .enable_reg = PCA9450_REG_BUCK4CTRL, + .enable_mask = BUCK4_ENMODE_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "buck5", + .of_match = of_match_ptr("BUCK5"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK5, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK5_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK5OUT, + .vsel_mask = BUCK5OUT_MASK, + .enable_reg = PCA9450_REG_BUCK5CTRL, + .enable_mask = BUCK5_ENMODE_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "buck6", + .of_match = of_match_ptr("BUCK6"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK6, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK6_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK6OUT, + .vsel_mask = BUCK6OUT_MASK, + .enable_reg = PCA9450_REG_BUCK6CTRL, + .enable_mask = BUCK6_ENMODE_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo1", + .of_match = of_match_ptr("LDO1"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO1, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO1_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo1_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts), + .vsel_reg = PCA9450_REG_LDO1CTRL, + .vsel_mask = LDO1OUT_MASK, + .enable_reg = PCA9450_REG_LDO1CTRL, + .enable_mask = LDO1_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo2", + .of_match = of_match_ptr("LDO2"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO2, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO2_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo2_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo2_volts), + .vsel_reg = PCA9450_REG_LDO2CTRL, + .vsel_mask = LDO2OUT_MASK, + .enable_reg = PCA9450_REG_LDO2CTRL, + .enable_mask = LDO2_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo3", + .of_match = of_match_ptr("LDO3"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO3, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO3_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo34_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), + .vsel_reg = PCA9450_REG_LDO3CTRL, + .vsel_mask = LDO3OUT_MASK, + .enable_reg = PCA9450_REG_LDO3CTRL, + .enable_mask = LDO3_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo4", + .of_match = of_match_ptr("LDO4"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO4, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO4_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo34_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), + .vsel_reg = PCA9450_REG_LDO4CTRL, + .vsel_mask = LDO4OUT_MASK, + .enable_reg = PCA9450_REG_LDO4CTRL, + .enable_mask = LDO4_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo5", + .of_match = of_match_ptr("LDO5"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO5, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO5_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo5_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts), + .vsel_reg = PCA9450_REG_LDO5CTRL_H, + .vsel_mask = LDO5HOUT_MASK, + .enable_reg = PCA9450_REG_LDO5CTRL_H, + .enable_mask = LDO5H_EN_MASK, + .owner = THIS_MODULE, + }, + }, +}; + +/* + * Buck3 removed on PCA9450B and connected with Buck1 internal for dual phase + * on PCA9450C as no Buck3. + */ +static const struct pca9450_regulator_desc pca9450bc_regulators[] = { + { + .desc = { + .name = "buck1", + .of_match = of_match_ptr("BUCK1"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK1, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM, + .linear_ranges = pca9450_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0, + .vsel_mask = BUCK1OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK1CTRL, + .enable_mask = BUCK1_ENMODE_MASK, + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK1OUT_DVS0, + .run_mask = BUCK1OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK1OUT_DVS1, + .standby_mask = BUCK1OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck2", + .of_match = of_match_ptr("BUCK2"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK2, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK2_VOLTAGE_NUM, + .linear_ranges = pca9450_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK2OUT_DVS0, + .vsel_mask = BUCK2OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK2CTRL, + .enable_mask = BUCK1_ENMODE_MASK, + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK2OUT_DVS0, + .run_mask = BUCK2OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK2OUT_DVS1, + .standby_mask = BUCK2OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck4", + .of_match = of_match_ptr("BUCK4"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK4, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK4OUT, + .vsel_mask = BUCK4OUT_MASK, + .enable_reg = PCA9450_REG_BUCK4CTRL, + .enable_mask = BUCK4_ENMODE_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "buck5", + .of_match = of_match_ptr("BUCK5"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK5, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK5_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK5OUT, + .vsel_mask = BUCK5OUT_MASK, + .enable_reg = PCA9450_REG_BUCK5CTRL, + .enable_mask = BUCK5_ENMODE_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "buck6", + .of_match = of_match_ptr("BUCK6"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK6, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK6_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK6OUT, + .vsel_mask = BUCK6OUT_MASK, + .enable_reg = PCA9450_REG_BUCK6CTRL, + .enable_mask = BUCK6_ENMODE_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo1", + .of_match = of_match_ptr("LDO1"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO1, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO1_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo1_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts), + .vsel_reg = PCA9450_REG_LDO1CTRL, + .vsel_mask = LDO1OUT_MASK, + .enable_reg = PCA9450_REG_LDO1CTRL, + .enable_mask = LDO1_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo2", + .of_match = of_match_ptr("LDO2"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO2, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO2_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo2_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo2_volts), + .vsel_reg = PCA9450_REG_LDO2CTRL, + .vsel_mask = LDO2OUT_MASK, + .enable_reg = PCA9450_REG_LDO2CTRL, + .enable_mask = LDO2_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo3", + .of_match = of_match_ptr("LDO3"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO3, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO3_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo34_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), + .vsel_reg = PCA9450_REG_LDO3CTRL, + .vsel_mask = LDO3OUT_MASK, + .enable_reg = PCA9450_REG_LDO3CTRL, + .enable_mask = LDO3_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo4", + .of_match = of_match_ptr("LDO4"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO4, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO4_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo34_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), + .vsel_reg = PCA9450_REG_LDO4CTRL, + .vsel_mask = LDO4OUT_MASK, + .enable_reg = PCA9450_REG_LDO4CTRL, + .enable_mask = LDO4_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo5", + .of_match = of_match_ptr("LDO5"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO5, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO5_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo5_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts), + .vsel_reg = PCA9450_REG_LDO5CTRL_H, + .vsel_mask = LDO5HOUT_MASK, + .enable_reg = PCA9450_REG_LDO5CTRL_H, + .enable_mask = LDO5H_EN_MASK, + .owner = THIS_MODULE, + }, + }, +}; + +static irqreturn_t pca9450_irq_handler(int irq, void *data) +{ + struct pca9450 *pca9450 = data; + struct regmap *regmap = pca9450->regmap; + unsigned int status; + int ret; + + ret = regmap_read(regmap, PCA9450_REG_INT1, &status); + if (ret < 0) { + dev_err(pca9450->dev, + "Failed to read INT1(%d)\n", ret); + return IRQ_NONE; + } + + if (status & IRQ_PWRON) + dev_warn(pca9450->dev, "PWRON interrupt.\n"); + + if (status & IRQ_WDOGB) + dev_warn(pca9450->dev, "WDOGB interrupt.\n"); + + if (status & IRQ_VR_FLT1) + dev_warn(pca9450->dev, "VRFLT1 interrupt.\n"); + + if (status & IRQ_VR_FLT2) + dev_warn(pca9450->dev, "VRFLT2 interrupt.\n"); + + if (status & IRQ_LOWVSYS) + dev_warn(pca9450->dev, "LOWVSYS interrupt.\n"); + + if (status & IRQ_THERM_105) + dev_warn(pca9450->dev, "IRQ_THERM_105 interrupt.\n"); + + if (status & IRQ_THERM_125) + dev_warn(pca9450->dev, "IRQ_THERM_125 interrupt.\n"); + + return IRQ_HANDLED; +} + +static int pca9450_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + enum pca9450_chip_type type = (unsigned int)(uintptr_t) + of_device_get_match_data(&i2c->dev); + const struct pca9450_regulator_desc *regulator_desc; + struct regulator_config config = { }; + struct pca9450 *pca9450; + unsigned int device_id, i; + int ret; + + if (!i2c->irq) { + dev_err(&i2c->dev, "No IRQ configured?\n"); + return -EINVAL; + } + + pca9450 = devm_kzalloc(&i2c->dev, sizeof(struct pca9450), GFP_KERNEL); + if (!pca9450) + return -ENOMEM; + + switch (type) { + case PCA9450_TYPE_PCA9450A: + regulator_desc = pca9450a_regulators; + pca9450->rcnt = ARRAY_SIZE(pca9450a_regulators); + break; + case PCA9450_TYPE_PCA9450BC: + regulator_desc = pca9450bc_regulators; + pca9450->rcnt = ARRAY_SIZE(pca9450bc_regulators); + break; + default: + dev_err(&i2c->dev, "Unknown device type"); + return -EINVAL; + } + + pca9450->irq = i2c->irq; + pca9450->type = type; + pca9450->dev = &i2c->dev; + + dev_set_drvdata(&i2c->dev, pca9450); + + pca9450->regmap = devm_regmap_init_i2c(i2c, + &pca9450_regmap_config); + if (IS_ERR(pca9450->regmap)) { + dev_err(&i2c->dev, "regmap initialization failed\n"); + return PTR_ERR(pca9450->regmap); + } + + ret = regmap_read(pca9450->regmap, PCA9450_REG_DEV_ID, &device_id); + if (ret) { + dev_err(&i2c->dev, "Read device id error\n"); + return ret; + } + + /* Check your board and dts for match the right pmic */ + if (((device_id >> 4) != 0x1 && type == PCA9450_TYPE_PCA9450A) || + ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC)) { + dev_err(&i2c->dev, "Device id(%x) mismatched\n", + device_id >> 4); + return -EINVAL; + } + + for (i = 0; i < pca9450->rcnt; i++) { + const struct regulator_desc *desc; + struct regulator_dev *rdev; + const struct pca9450_regulator_desc *r; + + r = ®ulator_desc[i]; + desc = &r->desc; + + config.regmap = pca9450->regmap; + config.dev = pca9450->dev; + + rdev = devm_regulator_register(pca9450->dev, desc, &config); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(pca9450->dev, + "Failed to register regulator(%s): %d\n", + desc->name, ret); + return ret; + } + } + + ret = devm_request_threaded_irq(pca9450->dev, pca9450->irq, NULL, + pca9450_irq_handler, + (IRQF_TRIGGER_FALLING | IRQF_ONESHOT), + "pca9450-irq", pca9450); + if (ret != 0) { + dev_err(pca9450->dev, "Failed to request IRQ: %d\n", + pca9450->irq); + return ret; + } + /* Unmask all interrupt except PWRON/WDOG/RSVD */ + ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_INT1_MSK, + IRQ_VR_FLT1 | IRQ_VR_FLT2 | IRQ_LOWVSYS | + IRQ_THERM_105 | IRQ_THERM_125, + IRQ_PWRON | IRQ_WDOGB | IRQ_RSVD); + if (ret) { + dev_err(&i2c->dev, "Unmask irq error\n"); + return ret; + } + + dev_info(&i2c->dev, "%s probed.\n", + type == PCA9450_TYPE_PCA9450A ? "pca9450a" : "pca9450bc"); + + return 0; +} + +static const struct of_device_id pca9450_of_match[] = { + { + .compatible = "nxp,pca9450a", + .data = (void *)PCA9450_TYPE_PCA9450A, + }, + { + .compatible = "nxp,pca9450b", + .data = (void *)PCA9450_TYPE_PCA9450BC, + }, + { + .compatible = "nxp,pca9450c", + .data = (void *)PCA9450_TYPE_PCA9450BC, + }, + { } +}; +MODULE_DEVICE_TABLE(of, pca9450_of_match); + +static struct i2c_driver pca9450_i2c_driver = { + .driver = { + .name = "nxp-pca9450", + .of_match_table = pca9450_of_match, + }, + .probe = pca9450_i2c_probe, +}; + +static int __init pca9450_i2c_init(void) +{ + return i2c_add_driver(&pca9450_i2c_driver); +} +module_init(pca9450_i2c_init); + +static void __exit pca9450_i2c_exit(void) +{ + i2c_del_driver(&pca9450_i2c_driver); +} +module_exit(pca9450_i2c_exit); + +MODULE_AUTHOR("Robin Gong <yibin.gong@nxp.com>"); +MODULE_DESCRIPTION("NXP PCA9450 Power Management IC driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h new file mode 100644 index 00000000..1bbd301 --- /dev/null +++ b/include/linux/regulator/pca9450.h @@ -0,0 +1,219 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* Copyright 2020 NXP. */ + +#ifndef __LINUX_REG_PCA9450_H__ +#define __LINUX_REG_PCA9450_H__ + +#include <linux/regmap.h> + +enum pca9450_chip_type { + PCA9450_TYPE_PCA9450A = 0, + PCA9450_TYPE_PCA9450BC, + PCA9450_TYPE_AMOUNT, +}; + +enum { + PCA9450_BUCK1 = 0, + PCA9450_BUCK2, + PCA9450_BUCK3, + PCA9450_BUCK4, + PCA9450_BUCK5, + PCA9450_BUCK6, + PCA9450_LDO1, + PCA9450_LDO2, + PCA9450_LDO3, + PCA9450_LDO4, + PCA9450_LDO5, + PCA9450_REGULATOR_CNT, +}; + +enum { + PCA9450_DVS_LEVEL_RUN = 0, + PCA9450_DVS_LEVEL_STANDBY, + PCA9450_DVS_LEVEL_MAX, +}; + +#define PCA9450_BUCK1_VOLTAGE_NUM 0x80 +#define PCA9450_BUCK2_VOLTAGE_NUM 0x80 +#define PCA9450_BUCK3_VOLTAGE_NUM 0x80 +#define PCA9450_BUCK4_VOLTAGE_NUM 0x80 + +#define PCA9450_BUCK5_VOLTAGE_NUM 0x80 +#define PCA9450_BUCK6_VOLTAGE_NUM 0x80 + +#define PCA9450_LDO1_VOLTAGE_NUM 0x08 +#define PCA9450_LDO2_VOLTAGE_NUM 0x08 +#define PCA9450_LDO3_VOLTAGE_NUM 0x20 +#define PCA9450_LDO4_VOLTAGE_NUM 0x20 +#define PCA9450_LDO5_VOLTAGE_NUM 0x10 + +enum { + PCA9450_REG_DEV_ID = 0x00, + PCA9450_REG_INT1 = 0x01, + PCA9450_REG_INT1_MSK = 0x02, + PCA9450_REG_STATUS1 = 0x03, + PCA9450_REG_STATUS2 = 0x04, + PCA9450_REG_PWRON_STAT = 0x05, + PCA9450_REG_SWRST = 0x06, + PCA9450_REG_PWRCTRL = 0x07, + PCA9450_REG_RESET_CTRL = 0x08, + PCA9450_REG_CONFIG1 = 0x09, + PCA9450_REG_CONFIG2 = 0x0A, + PCA9450_REG_BUCK123_DVS = 0x0C, + PCA9450_REG_BUCK1OUT_LIMIT = 0x0D, + PCA9450_REG_BUCK2OUT_LIMIT = 0x0E, + PCA9450_REG_BUCK3OUT_LIMIT = 0x0F, + PCA9450_REG_BUCK1CTRL = 0x10, + PCA9450_REG_BUCK1OUT_DVS0 = 0x11, + PCA9450_REG_BUCK1OUT_DVS1 = 0x12, + PCA9450_REG_BUCK2CTRL = 0x13, + PCA9450_REG_BUCK2OUT_DVS0 = 0x14, + PCA9450_REG_BUCK2OUT_DVS1 = 0x15, + PCA9450_REG_BUCK3CTRL = 0x16, + PCA9450_REG_BUCK3OUT_DVS0 = 0x17, + PCA9450_REG_BUCK3OUT_DVS1 = 0x18, + PCA9450_REG_BUCK4CTRL = 0x19, + PCA9450_REG_BUCK4OUT = 0x1A, + PCA9450_REG_BUCK5CTRL = 0x1B, + PCA9450_REG_BUCK5OUT = 0x1C, + PCA9450_REG_BUCK6CTRL = 0x1D, + PCA9450_REG_BUCK6OUT = 0x1E, + PCA9450_REG_LDO_AD_CTRL = 0x20, + PCA9450_REG_LDO1CTRL = 0x21, + PCA9450_REG_LDO2CTRL = 0x22, + PCA9450_REG_LDO3CTRL = 0x23, + PCA9450_REG_LDO4CTRL = 0x24, + PCA9450_REG_LDO5CTRL_L = 0x25, + PCA9450_REG_LDO5CTRL_H = 0x26, + PCA9450_REG_LOADSW_CTRL = 0x2A, + PCA9450_REG_VRFLT1_STS = 0x2B, + PCA9450_REG_VRFLT2_STS = 0x2C, + PCA9450_REG_VRFLT1_MASK = 0x2D, + PCA9450_REG_VRFLT2_MASK = 0x2E, + PCA9450_MAX_REGISTER = 0x2F, +}; + +/* PCA9450 BUCK ENMODE bits */ +#define BUCK_ENMODE_OFF 0x00 +#define BUCK_ENMODE_ONREQ 0x01 +#define BUCK_ENMODE_ONREQ_STBYREQ 0x02 +#define BUCK_ENMODE_ON 0x03 + +/* PCA9450_REG_BUCK1_CTRL bits */ +#define BUCK1_RAMP_MASK 0xC0 +#define BUCK1_RAMP_25MV 0x0 +#define BUCK1_RAMP_12P5MV 0x1 +#define BUCK1_RAMP_6P25MV 0x2 +#define BUCK1_RAMP_3P125MV 0x3 +#define BUCK1_DVS_CTRL 0x10 +#define BUCK1_AD 0x08 +#define BUCK1_FPWM 0x04 +#define BUCK1_ENMODE_MASK 0x03 + +/* PCA9450_REG_BUCK2_CTRL bits */ +#define BUCK2_RAMP_MASK 0xC0 +#define BUCK2_RAMP_25MV 0x0 +#define BUCK2_RAMP_12P5MV 0x1 +#define BUCK2_RAMP_6P25MV 0x2 +#define BUCK2_RAMP_3P125MV 0x3 +#define BUCK2_DVS_CTRL 0x10 +#define BUCK2_AD 0x08 +#define BUCK2_FPWM 0x04 +#define BUCK2_ENMODE_MASK 0x03 + +/* PCA9450_REG_BUCK3_CTRL bits */ +#define BUCK3_RAMP_MASK 0xC0 +#define BUCK3_RAMP_25MV 0x0 +#define BUCK3_RAMP_12P5MV 0x1 +#define BUCK3_RAMP_6P25MV 0x2 +#define BUCK3_RAMP_3P125MV 0x3 +#define BUCK3_DVS_CTRL 0x10 +#define BUCK3_AD 0x08 +#define BUCK3_FPWM 0x04 +#define BUCK3_ENMODE_MASK 0x03 + +/* PCA9450_REG_BUCK4_CTRL bits */ +#define BUCK4_AD 0x08 +#define BUCK4_FPWM 0x04 +#define BUCK4_ENMODE_MASK 0x03 + +/* PCA9450_REG_BUCK5_CTRL bits */ +#define BUCK5_AD 0x08 +#define BUCK5_FPWM 0x04 +#define BUCK5_ENMODE_MASK 0x03 + +/* PCA9450_REG_BUCK6_CTRL bits */ +#define BUCK6_AD 0x08 +#define BUCK6_FPWM 0x04 +#define BUCK6_ENMODE_MASK 0x03 + +/* PCA9450_BUCK1OUT_DVS0 bits */ +#define BUCK1OUT_DVS0_MASK 0x7F +#define BUCK1OUT_DVS0_DEFAULT 0x14 + +/* PCA9450_BUCK1OUT_DVS1 bits */ +#define BUCK1OUT_DVS1_MASK 0x7F +#define BUCK1OUT_DVS1_DEFAULT 0x14 + +/* PCA9450_BUCK2OUT_DVS0 bits */ +#define BUCK2OUT_DVS0_MASK 0x7F +#define BUCK2OUT_DVS0_DEFAULT 0x14 + +/* PCA9450_BUCK2OUT_DVS1 bits */ +#define BUCK2OUT_DVS1_MASK 0x7F +#define BUCK2OUT_DVS1_DEFAULT 0x14 + +/* PCA9450_BUCK3OUT_DVS0 bits */ +#define BUCK3OUT_DVS0_MASK 0x7F +#define BUCK3OUT_DVS0_DEFAULT 0x14 + +/* PCA9450_BUCK3OUT_DVS1 bits */ +#define BUCK3OUT_DVS1_MASK 0x7F +#define BUCK3OUT_DVS1_DEFAULT 0x14 + +/* PCA9450_REG_BUCK4OUT bits */ +#define BUCK4OUT_MASK 0x7F +#define BUCK4OUT_DEFAULT 0x6C + +/* PCA9450_REG_BUCK5OUT bits */ +#define BUCK5OUT_MASK 0x7F +#define BUCK5OUT_DEFAULT 0x30 + +/* PCA9450_REG_BUCK6OUT bits */ +#define BUCK6OUT_MASK 0x7F +#define BUCK6OUT_DEFAULT 0x14 + +/* PCA9450_REG_LDO1_VOLT bits */ +#define LDO1_EN_MASK 0xC0 +#define LDO1OUT_MASK 0x07 + +/* PCA9450_REG_LDO2_VOLT bits */ +#define LDO2_EN_MASK 0xC0 +#define LDO2OUT_MASK 0x07 + +/* PCA9450_REG_LDO3_VOLT bits */ +#define LDO3_EN_MASK 0xC0 +#define LDO3OUT_MASK 0x0F + +/* PCA9450_REG_LDO4_VOLT bits */ +#define LDO4_EN_MASK 0xC0 +#define LDO4OUT_MASK 0x0F + +/* PCA9450_REG_LDO5_VOLT bits */ +#define LDO5L_EN_MASK 0xC0 +#define LDO5LOUT_MASK 0x0F + +#define LDO5H_EN_MASK 0xC0 +#define LDO5HOUT_MASK 0x0F + +/* PCA9450_REG_IRQ bits */ +#define IRQ_PWRON 0x80 +#define IRQ_WDOGB 0x40 +#define IRQ_RSVD 0x20 +#define IRQ_VR_FLT1 0x10 +#define IRQ_VR_FLT2 0x08 +#define IRQ_LOWVSYS 0x04 +#define IRQ_THERM_105 0x02 +#define IRQ_THERM_125 0x01 + +#endif /* __LINUX_REG_PCA9450_H__ */
Add NXP pca9450 pmic driver. Signed-off-by: Robin Gong <yibin.gong@nxp.com> --- drivers/regulator/Kconfig | 8 + drivers/regulator/Makefile | 1 + drivers/regulator/pca9450-regulator.c | 843 ++++++++++++++++++++++++++++++++++ include/linux/regulator/pca9450.h | 219 +++++++++ 4 files changed, 1071 insertions(+) create mode 100644 drivers/regulator/pca9450-regulator.c create mode 100644 include/linux/regulator/pca9450.h