| Message ID | 1600224517-31465-4-git-send-email-peng.fan@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | imx: support i.MX7ULP HSRUN mode | expand |
> From: Peng Fan <peng.fan@nxp.com> > Sent: Wednesday, September 16, 2020 10:49 AM > > Configure PMPROT to let ARM core could run into HSRUN mode. > In LDO-enabled mode, HSRUN mode is not allowed, so add a check before > configure PMPROT. > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > --- > arch/arm/mach-imx/pm-imx7ulp.c | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/arch/arm/mach-imx/pm-imx7ulp.c > b/arch/arm/mach-imx/pm-imx7ulp.c index 2e756d8191fa..393faf1e8382 > 100644 > --- a/arch/arm/mach-imx/pm-imx7ulp.c > +++ b/arch/arm/mach-imx/pm-imx7ulp.c > @@ -11,6 +11,10 @@ > > #include "common.h" > > +#define PMC0_CTRL 0x28 > +#define BM_CTRL_LDOEN BIT(31) > + > +#define SMC_PMPROT 0x8 > #define SMC_PMCTRL 0x10 > #define BP_PMCTRL_PSTOPO 16 > #define PSTOPO_PSTOP3 0x3 > @@ -25,7 +29,10 @@ > #define BM_PMCTRL_RUNM (3 << BP_PMCTRL_RUNM) > #define BM_PMCTRL_STOPM (7 << BP_PMCTRL_STOPM) > > +#define BM_PMPROT_AHSRUN BIT(7) > + > static void __iomem *smc1_base; > +static void __iomem *pmc0_base; > > int imx7ulp_set_lpm(enum ulp_cpu_pwr_mode mode) { @@ -65,5 +72,13 > @@ void __init imx7ulp_pm_init(void) > of_node_put(np); > WARN_ON(!smc1_base); > > + np = of_find_compatible_node(NULL, NULL, "fsl,imx7ulp-pmc0"); > + pmc0_base = of_iomap(np, 0); > + WARN_ON(!pmc0_base); > + of_node_put(np); > + > + if (!(readl_relaxed(pmc0_base + PMC0_CTRL) & BM_CTRL_LDOEN)) > + writel_relaxed(BM_PMPROT_AHSRUN, smc1_base + SMC_PMPROT); When will HSRUN mode be enabled? E.g. RUNM=HSRUN It seems RUNM will be cleared in the following imx7ulp_set_lpm(). Regards Aisheng > + > imx7ulp_set_lpm(ULP_PM_RUN); > } > -- > 2.28.0
diff --git a/arch/arm/mach-imx/pm-imx7ulp.c b/arch/arm/mach-imx/pm-imx7ulp.c index 2e756d8191fa..393faf1e8382 100644 --- a/arch/arm/mach-imx/pm-imx7ulp.c +++ b/arch/arm/mach-imx/pm-imx7ulp.c @@ -11,6 +11,10 @@ #include "common.h" +#define PMC0_CTRL 0x28 +#define BM_CTRL_LDOEN BIT(31) + +#define SMC_PMPROT 0x8 #define SMC_PMCTRL 0x10 #define BP_PMCTRL_PSTOPO 16 #define PSTOPO_PSTOP3 0x3 @@ -25,7 +29,10 @@ #define BM_PMCTRL_RUNM (3 << BP_PMCTRL_RUNM) #define BM_PMCTRL_STOPM (7 << BP_PMCTRL_STOPM) +#define BM_PMPROT_AHSRUN BIT(7) + static void __iomem *smc1_base; +static void __iomem *pmc0_base; int imx7ulp_set_lpm(enum ulp_cpu_pwr_mode mode) { @@ -65,5 +72,13 @@ void __init imx7ulp_pm_init(void) of_node_put(np); WARN_ON(!smc1_base); + np = of_find_compatible_node(NULL, NULL, "fsl,imx7ulp-pmc0"); + pmc0_base = of_iomap(np, 0); + WARN_ON(!pmc0_base); + of_node_put(np); + + if (!(readl_relaxed(pmc0_base + PMC0_CTRL) & BM_CTRL_LDOEN)) + writel_relaxed(BM_PMPROT_AHSRUN, smc1_base + SMC_PMPROT); + imx7ulp_set_lpm(ULP_PM_RUN); }