diff mbox series

[3/3] arm64: dts: imx8mp-evk: Correct WDOG_B pin configuration

Message ID 1602229667-13165-3-git-send-email-Anson.Huang@nxp.com (mailing list archive)
State New, archived
Headers show
Series [1/3] arm64: dts: imx8mm: Correct WDOG_B pin configuration | expand

Commit Message

Anson Huang Oct. 9, 2020, 7:47 a.m. UTC 
Different revision of i.MX8MP EVK boards may have different external
pull up registor design, some are enabled while some are NOT, to make
sure the WDOG_B pin works properly, better to enable internal pull up
resistor. Since enabling internal pull up resistor is NOT harmful and
having benefit of flexibility on different board design, just enable
it for all i.MX8MP boards.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index ad66f12..908b92b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -262,7 +262,7 @@ 
 
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xc6
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x166
 		>;
 	};
 };