diff mbox series

[1/3] arm64: dts: imx8mn: Configure clock rate for audio plls

Message ID 1607332356-13431-2-git-send-email-shengjiu.wang@nxp.com (mailing list archive)
State New, archived
Headers show
Series Add sound card support for imx8mn-evk board | expand

Commit Message

Shengjiu Wang Dec. 7, 2020, 9:12 a.m. UTC 
Configure clock rate for audio plls. audio pll1 is used
as parent clock for clocks that is multiple of 8kHz.
audio pll2 is used as parent clock for clocks that is
multiple of 11kHz.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mn.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index e35182ff6f59..439cf6ca3114 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -581,7 +581,9 @@  clk: clock-controller@30380000 {
 						<&clk IMX8MN_CLK_NOC>,
 						<&clk IMX8MN_CLK_AUDIO_AHB>,
 						<&clk IMX8MN_CLK_IPG_AUDIO_ROOT>,
-						<&clk IMX8MN_SYS_PLL3>;
+						<&clk IMX8MN_SYS_PLL3>,
+						<&clk IMX8MN_AUDIO_PLL1>,
+						<&clk IMX8MN_AUDIO_PLL2>;
 				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_800M>,
 							 <&clk IMX8MN_ARM_PLL_OUT>,
 							 <&clk IMX8MN_SYS_PLL3_OUT>,
@@ -589,7 +591,9 @@  clk: clock-controller@30380000 {
 				assigned-clock-rates = <0>, <0>, <0>,
 							<400000000>,
 							<400000000>,
-							<600000000>;
+							<600000000>,
+							<393216000>,
+							<361267200>;
 			};
 
 			src: reset-controller@30390000 {