[4/4] dt-bindings: gpu: Convert v3d to json-schema

Commit Message

Stefan Wahren Dec. 23, 2020, 8:27 p.m. UTC

This converts the v3d bindings to yaml format.

Signed-off-by: Stefan Wahren <[e-mail]>
---
 .../devicetree/bindings/gpu/brcm,bcm-v3d.txt       | 33 ----------
 .../devicetree/bindings/gpu/brcm,bcm-v3d.yaml      | 76 ++++++++++++++++++++++
 2 files changed, 76 insertions(+), 33 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
 create mode 100644 Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml

Patch

diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
deleted file mode 100644
index b2df82b..0000000
--- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
+++ /dev/null
@@ -1,33 +0,0 @@ 
-Broadcom V3D GPU
-
-Only the Broadcom V3D 3.x and newer GPUs are covered by this binding.
-For V3D 2.x, see brcm,bcm-vc4.txt.
-
-Required properties:
-- compatible:	Should be "brcm,7268-v3d" or "brcm,7278-v3d"
-- reg:		Physical base addresses and lengths of the register areas
-- reg-names:	Names for the register areas.  The "hub" and "core0"
-		  register areas are always required.  The "gca" register area
-		  is required if the GCA cache controller is present.  The
-		  "bridge" register area is required if an external reset
-		  controller is not present.
-- interrupts:	The interrupt numbers.  The first interrupt is for the hub,
-		  while the following interrupts are separate interrupt lines
-		  for the cores (if they don't share the hub's interrupt).
-		  See bindings/interrupt-controller/interrupts.txt
-
-Optional properties:
-- clocks:	The core clock the unit runs on
-- resets:	The reset line for v3d, if not using a mapping of the bridge
-		  See bindings/reset/reset.txt
-
-v3d {
-	compatible = "brcm,7268-v3d";
-	reg = <0xf1204000 0x100>,
-	      <0xf1200000 0x4000>,
-	      <0xf1208000 0x4000>,
-	      <0xf1204100 0x100>;
-	reg-names = "bridge", "hub", "core0", "gca";
-	interrupts = <0 78 4>,
-		     <0 77 4>;
-};
diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
new file mode 100644
index 0000000..a2b06d42
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
@@ -0,0 +1,76 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/brcm,bcm-v3d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom V3D GPU Bindings
+
+maintainers:
+  - Eric Anholt <[e-mail]>
+  - Nicolas Saenz Julienne <[e-mail]>
+
+properties:
+  $nodename:
+    pattern: '^gpu@[a-f0-9]+$'
+
+  compatible:
+    enum:
+      - brcm,7268-v3d
+      - brcm,7278-v3d
+
+  reg:
+    items:
+      - description: hub register
+      - description: core0 register
+      - description: GCA cache controller register (if GCA controller)
+      - description: bridge register (if no external reset controller)
+    minItems: 2
+    maxItems: 4
+
+  reg-names:
+    items:
+      enum: [ bridge, core0, gca, hub ]
+    minItems: 2
+    maxItems: 4
+
+  interrupts:
+    items:
+      - description: hub interrupt
+      - description: core interrupt (if it doesn't share the hub's interrupt)
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    gpu@f1200000 {
+      compatible = "brcm,7268-v3d";
+      reg = <0xf1204000 0x100>,
+            <0xf1200000 0x4000>,
+            <0xf1208000 0x4000>,
+            <0xf1204100 0x100>;
+      reg-names = "bridge", "hub", "core0", "gca";
+      interrupts = <0 78 4>,
+                   <0 77 4>;
+    };
+
+...