diff mbox series

[v4,3/3] arm64: dts: mt8192: add mt6315 regulator nodes

Message ID 1612678457-11548-4-git-send-email-hsin-hsiung.wang@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Add support for MT6315 regulator | expand

Commit Message

Hsin-Hsiung Wang Feb. 7, 2021, 6:14 a.m. UTC 
Add MT6315 regulator nodes to MT8192 evaluation board.

Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
---
changes since v3:
- update the dts node.
---
 arch/arm64/boot/dts/mediatek/mt8192-evb.dts | 46 +++++++++++++++++++++
 1 file changed, 46 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8192-evb.dts b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
index 0205837fa698..83f26cd5f693 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
@@ -24,6 +24,52 @@ 
 	};
 };
 
+&spmi {
+	grpid = <11>;
+	mt6315_6: pmic@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 0>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "Vbcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2 4>;
+				regulator-always-on;
+			};
+
+			mt6315_6_vbuck3: vbuck3 {
+				regulator-compatible = "vbuck3";
+				regulator-name = "Vlcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2 4>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mt6315_7: pmic@7 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x7 0>;
+
+		regulators {
+			mt6315_7_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "Vgpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2 4>;
+			};
+		};
+	};
+};
+
 &uart0 {
 	status = "okay";
 };