@@ -9,6 +9,7 @@
*/
#include <linux/bitfield.h>
+#include <linux/interconnect.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/delay.h>
@@ -287,6 +288,9 @@ struct pltfm_imx_data {
struct clk *clk_ahb;
struct clk *clk_per;
unsigned int actual_clock;
+ struct icc_path *bus_path;
+ unsigned int bus_rate;
+
enum {
NO_CMD_PENDING, /* no multiblock command pending */
MULTIBLK_IN_PROCESS, /* exact multiblock cmd in process */
@@ -1539,6 +1543,18 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS)
cpu_latency_qos_add_request(&imx_data->pm_qos_req, 0);
+ imx_data->bus_path = devm_of_icc_get(&pdev->dev, "path");
+ if (IS_ERR(imx_data->bus_path)) {
+ return PTR_ERR(imx_data->bus_path);
+ } else if (imx_data->bus_path) {
+ if (of_property_read_u32(pdev->dev.of_node, "fsl,icc-rate", &imx_data->bus_rate)) {
+ dev_err(&pdev->dev, "icc-rate missing\n");
+ return -EINVAL;
+ }
+
+ err = icc_set_bw(imx_data->bus_path, 0, imx_data->bus_rate);
+ }
+
imx_data->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(imx_data->clk_ipg)) {
err = PTR_ERR(imx_data->clk_ipg);
@@ -1720,14 +1736,20 @@ static int sdhci_esdhc_suspend(struct device *dev)
ret = mmc_gpio_set_cd_wake(host->mmc, true);
+ icc_disable(imx_data->bus_path);
+
return ret;
}
static int sdhci_esdhc_resume(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
int ret;
+ icc_enable(imx_data->bus_path);
+
ret = pinctrl_pm_select_default_state(dev);
if (ret)
return ret;
@@ -1779,6 +1801,8 @@ static int sdhci_esdhc_runtime_suspend(struct device *dev)
if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS)
cpu_latency_qos_remove_request(&imx_data->pm_qos_req);
+ icc_disable(imx_data->bus_path);
+
return ret;
}
@@ -1789,6 +1813,8 @@ static int sdhci_esdhc_runtime_resume(struct device *dev)
struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
int err;
+ icc_enable(imx_data->bus_path);
+
if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS)
cpu_latency_qos_add_request(&imx_data->pm_qos_req, 0);
On probe, if the dts node contains a valid icc path, then look for the fsl,icc-rate property and get the rate. Also set the icc bandwidth for that path to the nominal rate needed for sdhc to function right. Then enable and disable the path every time the sdhc is used or not. This will result in reducing the clock speeds along the icc path for each pl301 and NoC, but still meet the requirements for all the other icc consumers. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> --- drivers/mmc/host/sdhci-esdhc-imx.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)