| Message ID | 1622791880-20262-1-git-send-email-chunfeng.yun@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/3] dt-bindings: phy: mediatek: tphy: add support hardware version 3 | expand |
On Fri, Jun 04, 2021 at 03:31:18PM +0800, Chunfeng Yun wrote: > The PHYA architecture is updated, and doesn't support slew rate > calibration anymore on 7nm or advanced process, add a new version > number to support it. > Note: the FreqMeter bank is not used but reserved. > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > --- > .../devicetree/bindings/phy/mediatek,tphy.yaml | 14 +++++++++----- > 1 file changed, 9 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > index b8a7651a3d9a..939c09296b5f 100644 > --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > @@ -15,7 +15,7 @@ description: | > controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA. > > Layout differences of banks between T-PHY V1 (mt8173/mt2701) and > - T-PHY V2 (mt2712) when works on USB mode: > + T-PHY V2 (mt2712) / V3 (mt8195) when works on USB mode: > ----------------------------------- > Version 1: > port offset bank > @@ -34,7 +34,7 @@ description: | > u2 port2 0x1800 U2PHY_COM > ... > > - Version 2: > + Version 2/3: > port offset bank > u2 port0 0x0000 MISC > 0x0100 FMREG > @@ -59,7 +59,8 @@ description: | > > SPLLC shared by u3 ports and FMREG shared by u2 ports on V1 are put back > into each port; a new bank MISC for u2 ports and CHIP for u3 ports are > - added on V2. > + added on V2; the FMREG bank for slew rate calibration is not used anymore > + and reserved on V3; > > properties: > $nodename: > @@ -79,8 +80,11 @@ properties: > - mediatek,mt2712-tphy > - mediatek,mt7629-tphy > - mediatek,mt8183-tphy > - - mediatek,mt8195-tphy > - const: mediatek,generic-tphy-v2 This doesn't look like a good change. What happens if a DT has the above. It didn't work or didn't support new features? Please clarify in the commit the implications of changing this. Changing a DT to 'mediatek,generic-tphy-v3' will break existing OS if it was looking for v2. > + - items: > + - enum: > + - mediatek,mt8195-tphy > + - const: mediatek,generic-tphy-v3 > - const: mediatek,mt2701-u3phy > deprecated: true > - const: mediatek,mt2712-u3phy > @@ -91,7 +95,7 @@ properties: > description: > Register shared by multiple ports, exclude port's private register. > It is needed for T-PHY V1, such as mt2701 and mt8173, but not for > - T-PHY V2, such as mt2712. > + T-PHY V2/V3, such as mt2712. > maxItems: 1 > > "#address-cells": > -- > 2.18.0
On Wed, 2021-06-16 at 17:28 -0600, Rob Herring wrote: > On Fri, Jun 04, 2021 at 03:31:18PM +0800, Chunfeng Yun wrote: > > The PHYA architecture is updated, and doesn't support slew rate > > calibration anymore on 7nm or advanced process, add a new version > > number to support it. > > Note: the FreqMeter bank is not used but reserved. > > > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > > --- > > .../devicetree/bindings/phy/mediatek,tphy.yaml | 14 +++++++++----- > > 1 file changed, 9 insertions(+), 5 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > > index b8a7651a3d9a..939c09296b5f 100644 > > --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > > +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > > @@ -15,7 +15,7 @@ description: | > > controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA. > > > > Layout differences of banks between T-PHY V1 (mt8173/mt2701) and > > - T-PHY V2 (mt2712) when works on USB mode: > > + T-PHY V2 (mt2712) / V3 (mt8195) when works on USB mode: > > ----------------------------------- > > Version 1: > > port offset bank > > @@ -34,7 +34,7 @@ description: | > > u2 port2 0x1800 U2PHY_COM > > ... > > > > - Version 2: > > + Version 2/3: > > port offset bank > > u2 port0 0x0000 MISC > > 0x0100 FMREG > > @@ -59,7 +59,8 @@ description: | > > > > SPLLC shared by u3 ports and FMREG shared by u2 ports on V1 are put back > > into each port; a new bank MISC for u2 ports and CHIP for u3 ports are > > - added on V2. > > + added on V2; the FMREG bank for slew rate calibration is not used anymore > > + and reserved on V3; > > > > properties: > > $nodename: > > @@ -79,8 +80,11 @@ properties: > > - mediatek,mt2712-tphy > > - mediatek,mt7629-tphy > > - mediatek,mt8183-tphy > > - - mediatek,mt8195-tphy > > - const: mediatek,generic-tphy-v2 > > This doesn't look like a good change. > > What happens if a DT has the above. It didn't work or didn't support new > features? It does not affect function, but will waste some time to calibrate slew rate on mt8195. > Please clarify in the commit the implications of changing > this. Changing a DT to 'mediatek,generic-tphy-v3' will break existing OS > if it was looking for v2. On mt8195, it's backward compatible with hw v2, the unused FMREG bank is reversed, but noop when W/R registers. > > > + - items: > > + - enum: > > + - mediatek,mt8195-tphy > > + - const: mediatek,generic-tphy-v3 > > - const: mediatek,mt2701-u3phy > > deprecated: true > > - const: mediatek,mt2712-u3phy > > @@ -91,7 +95,7 @@ properties: > > description: > > Register shared by multiple ports, exclude port's private register. > > It is needed for T-PHY V1, such as mt2701 and mt8173, but not for > > - T-PHY V2, such as mt2712. > > + T-PHY V2/V3, such as mt2712. > > maxItems: 1 > > > > "#address-cells": > > -- > > 2.18.0
diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml index b8a7651a3d9a..939c09296b5f 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -15,7 +15,7 @@ description: | controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA. Layout differences of banks between T-PHY V1 (mt8173/mt2701) and - T-PHY V2 (mt2712) when works on USB mode: + T-PHY V2 (mt2712) / V3 (mt8195) when works on USB mode: ----------------------------------- Version 1: port offset bank @@ -34,7 +34,7 @@ description: | u2 port2 0x1800 U2PHY_COM ... - Version 2: + Version 2/3: port offset bank u2 port0 0x0000 MISC 0x0100 FMREG @@ -59,7 +59,8 @@ description: | SPLLC shared by u3 ports and FMREG shared by u2 ports on V1 are put back into each port; a new bank MISC for u2 ports and CHIP for u3 ports are - added on V2. + added on V2; the FMREG bank for slew rate calibration is not used anymore + and reserved on V3; properties: $nodename: @@ -79,8 +80,11 @@ properties: - mediatek,mt2712-tphy - mediatek,mt7629-tphy - mediatek,mt8183-tphy - - mediatek,mt8195-tphy - const: mediatek,generic-tphy-v2 + - items: + - enum: + - mediatek,mt8195-tphy + - const: mediatek,generic-tphy-v3 - const: mediatek,mt2701-u3phy deprecated: true - const: mediatek,mt2712-u3phy @@ -91,7 +95,7 @@ properties: description: Register shared by multiple ports, exclude port's private register. It is needed for T-PHY V1, such as mt2701 and mt8173, but not for - T-PHY V2, such as mt2712. + T-PHY V2/V3, such as mt2712. maxItems: 1 "#address-cells":
The PHYA architecture is updated, and doesn't support slew rate calibration anymore on 7nm or advanced process, add a new version number to support it. Note: the FreqMeter bank is not used but reserved. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- .../devicetree/bindings/phy/mediatek,tphy.yaml | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)