diff mbox series

[v3,10/13] usb: mtu3: support runtime PM for host mode

Message ID 1626340078-29111-11-git-send-email-chunfeng.yun@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Add support mtu3 gadget (runtime) PM | expand

Commit Message

Chunfeng Yun (云春峰) July 15, 2021, 9:07 a.m. UTC
Use a dedicated wakeup irq for runtime suspend/resume, and interrupts
names are provided if using wakeup irq, this patch only support host
mode.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v3: fix free-after-use issue
v2: no changes
---
 drivers/usb/mtu3/mtu3.h      |  1 +
 drivers/usb/mtu3/mtu3_core.c | 13 ++++++--
 drivers/usb/mtu3/mtu3_plat.c | 64 ++++++++++++++++++++++++++++++++----
 3 files changed, 69 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
index 0ae9b33b50ea..171e5b383063 100644
--- a/drivers/usb/mtu3/mtu3.h
+++ b/drivers/usb/mtu3/mtu3.h
@@ -246,6 +246,7 @@  struct ssusb_mtk {
 	void __iomem *ippc_base;
 	struct phy **phys;
 	int num_phys;
+	int wakeup_irq;
 	/* common power & clock */
 	struct regulator *vusb33;
 	struct clk_bulk_data clks[BULK_CLKS_CNT];
diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index 562f4357831e..6d23acb4fffc 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -888,9 +888,16 @@  int ssusb_gadget_init(struct ssusb_mtk *ssusb)
 	if (mtu == NULL)
 		return -ENOMEM;
 
-	mtu->irq = platform_get_irq(pdev, 0);
-	if (mtu->irq < 0)
-		return mtu->irq;
+	mtu->irq = platform_get_irq_byname_optional(pdev, "device");
+	if (mtu->irq < 0) {
+		if (mtu->irq == -EPROBE_DEFER)
+			return mtu->irq;
+
+		/* for backward compatibility */
+		mtu->irq = platform_get_irq(pdev, 0);
+		if (mtu->irq < 0)
+			return mtu->irq;
+	}
 	dev_info(dev, "irq %d\n", mtu->irq);
 
 	mtu->mac_base = devm_platform_ioremap_resource_byname(pdev, "mac");
diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index a906b24723e6..2be890f84c94 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -12,6 +12,7 @@ 
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
 
 #include "mtu3.h"
 #include "mtu3_dr.h"
@@ -208,6 +209,10 @@  static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
 	if (IS_ERR(ssusb->ippc_base))
 		return PTR_ERR(ssusb->ippc_base);
 
+	ssusb->wakeup_irq = platform_get_irq_byname_optional(pdev, "wakeup");
+	if (ssusb->wakeup_irq == -EPROBE_DEFER)
+		return ssusb->wakeup_irq;
+
 	ssusb->dr_mode = usb_get_dr_mode(dev);
 	if (ssusb->dr_mode == USB_DR_MODE_UNKNOWN)
 		ssusb->dr_mode = USB_DR_MODE_OTG;
@@ -295,14 +300,25 @@  static int mtu3_probe(struct platform_device *pdev)
 	ssusb_debugfs_create_root(ssusb);
 
 	/* enable power domain */
+	pm_runtime_set_active(dev);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_autosuspend_delay(dev, 4000);
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
-	device_enable_async_suspend(dev);
 
 	ret = ssusb_rscs_init(ssusb);
 	if (ret)
 		goto comm_init_err;
 
+	if (ssusb->wakeup_irq > 0) {
+		ret = dev_pm_set_dedicated_wake_irq(dev, ssusb->wakeup_irq);
+		if (ret) {
+			dev_err(dev, "failed to set wakeup irq %d\n", ssusb->wakeup_irq);
+			goto comm_exit;
+		}
+		dev_info(dev, "wakeup irq %d\n", ssusb->wakeup_irq);
+	}
+
 	ssusb_ip_sw_reset(ssusb);
 
 	if (IS_ENABLED(CONFIG_USB_MTU3_HOST))
@@ -353,6 +369,11 @@  static int mtu3_probe(struct platform_device *pdev)
 		goto comm_exit;
 	}
 
+	device_enable_async_suspend(dev);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+	pm_runtime_forbid(dev);
+
 	return 0;
 
 host_exit:
@@ -362,7 +383,7 @@  static int mtu3_probe(struct platform_device *pdev)
 comm_exit:
 	ssusb_rscs_exit(ssusb);
 comm_init_err:
-	pm_runtime_put_sync(dev);
+	pm_runtime_put_noidle(dev);
 	pm_runtime_disable(dev);
 	ssusb_debugfs_remove_root(ssusb);
 
@@ -373,6 +394,8 @@  static int mtu3_remove(struct platform_device *pdev)
 {
 	struct ssusb_mtk *ssusb = platform_get_drvdata(pdev);
 
+	pm_runtime_get_sync(&pdev->dev);
+
 	switch (ssusb->dr_mode) {
 	case USB_DR_MODE_PERIPHERAL:
 		ssusb_gadget_exit(ssusb);
@@ -390,9 +413,10 @@  static int mtu3_remove(struct platform_device *pdev)
 	}
 
 	ssusb_rscs_exit(ssusb);
-	pm_runtime_put_sync(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
 	ssusb_debugfs_remove_root(ssusb);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
 
 	return 0;
 }
@@ -401,7 +425,7 @@  static int mtu3_remove(struct platform_device *pdev)
  * when support dual-role mode, we reject suspend when
  * it works as device mode;
  */
-static int __maybe_unused mtu3_suspend(struct device *dev)
+static int mtu3_suspend_common(struct device *dev, pm_message_t msg)
 {
 	struct ssusb_mtk *ssusb = dev_get_drvdata(dev);
 
@@ -419,7 +443,7 @@  static int __maybe_unused mtu3_suspend(struct device *dev)
 	return 0;
 }
 
-static int __maybe_unused mtu3_resume(struct device *dev)
+static int mtu3_resume_common(struct device *dev, pm_message_t msg)
 {
 	struct ssusb_mtk *ssusb = dev_get_drvdata(dev);
 	int ret;
@@ -448,8 +472,36 @@  static int __maybe_unused mtu3_resume(struct device *dev)
 	return ret;
 }
 
+static int __maybe_unused mtu3_suspend(struct device *dev)
+{
+	return mtu3_suspend_common(dev, PMSG_SUSPEND);
+}
+
+static int __maybe_unused mtu3_resume(struct device *dev)
+{
+	return mtu3_resume_common(dev, PMSG_SUSPEND);
+}
+
+static int __maybe_unused mtu3_runtime_suspend(struct device *dev)
+{
+	if (!device_may_wakeup(dev))
+		return 0;
+
+	return mtu3_suspend_common(dev, PMSG_AUTO_SUSPEND);
+}
+
+static int __maybe_unused mtu3_runtime_resume(struct device *dev)
+{
+	if (!device_may_wakeup(dev))
+		return 0;
+
+	return mtu3_resume_common(dev, PMSG_AUTO_SUSPEND);
+}
+
 static const struct dev_pm_ops mtu3_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(mtu3_suspend, mtu3_resume)
+	SET_RUNTIME_PM_OPS(mtu3_runtime_suspend,
+			   mtu3_runtime_resume, NULL)
 };
 
 #define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &mtu3_pm_ops : NULL)