diff mbox series

[3/9] ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states

Message ID 1627820932-7247-4-git-send-email-stefan.wahren@i2se.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: Add Raspberry Pi CM4 & CM4 IO Board support | expand

Commit Message

Stefan Wahren Aug. 1, 2021, 12:28 p.m. UTC 
DT schema check complains at sd_io_1v8_reg about the following:

 [1800000, 1, 3300000, 0] is too long
 Additional items are not allowed (3300000, 0 were unexpected)

So fix the states definition.

Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index f24bdd0..abf8298 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -40,8 +40,8 @@ 
 		regulator-always-on;
 		regulator-settling-time-us = <5000>;
 		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3300000 0x0>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
 		status = "okay";
 	};