@@ -1298,7 +1298,7 @@ ssi0: ssi-0 {
dma-names = "rx", "tx", "rxu", "txu";
};
ssi1: ssi-1 {
- interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x03>, <&audma1 0x04>,
<&audma0 0x49>, <&audma1 0x4a>;
dma-names = "rx", "tx", "rxu", "txu";
@@ -1252,7 +1252,7 @@ ssi0: ssi-0 {
dma-names = "rx", "tx", "rxu", "txu";
};
ssi1: ssi-1 {
- interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x03>, <&audma1 0x04>,
<&audma0 0x49>, <&audma1 0x4a>;
dma-names = "rx", "tx", "rxu", "txu";
@@ -1365,7 +1365,7 @@ ssi0: ssi-0 {
dma-names = "rx", "tx", "rxu", "txu";
};
ssi1: ssi-1 {
- interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x03>, <&audma1 0x04>,
<&audma0 0x49>, <&audma1 0x4a>;
dma-names = "rx", "tx", "rxu", "txu";
@@ -1111,7 +1111,7 @@ ssi0: ssi-0 {
dma-names = "rx", "tx", "rxu", "txu";
};
ssi1: ssi-1 {
- interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x03>, <&audma1 0x04>,
<&audma0 0x49>, <&audma1 0x4a>;
dma-names = "rx", "tx", "rxu", "txu";
@@ -199,7 +199,7 @@ uart3: serial@50000000 {
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>;
clock-names = "baudclk", "apb_pclk";
- dmas = <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>;
+ dmas = <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -212,7 +212,7 @@ uart4: serial@50001000 {
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>;
clock-names = "baudclk", "apb_pclk";
- dmas = <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>;
+ dmas = <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -225,7 +225,7 @@ uart5: serial@50002000 {
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>;
clock-names = "baudclk", "apb_pclk";
- dmas = <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>;
+ dmas = <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -238,7 +238,7 @@ uart6: serial@50003000 {
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>;
clock-names = "baudclk", "apb_pclk";
- dmas = <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>;
+ dmas = <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -251,7 +251,7 @@ uart7: serial@50004000 {
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>;
clock-names = "baudclk", "apb_pclk";
- dmas = <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>;
+ dmas = <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>;
dma-names = "rx", "tx";
status = "disabled";
};
Remove superfluous spaces near properties and equal signs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- To be queued in renesas-devel for v6.2. arch/arm/boot/dts/r8a7742.dtsi | 2 +- arch/arm/boot/dts/r8a7790.dtsi | 2 +- arch/arm/boot/dts/r8a7791.dtsi | 2 +- arch/arm/boot/dts/r8a7793.dtsi | 2 +- arch/arm/boot/dts/r9a06g032.dtsi | 10 +++++----- 5 files changed, 9 insertions(+), 9 deletions(-)