| Message ID | 1679551448-19160-7-git-send-email-quic_taozha@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support to configure TPDM DSB subunit | expand |
On 23/03/2023 06:04, Tao Zhang wrote: > Add node to set and show programming mode for TPDM DSB subunit. > Once the DSB programming mode is set, it will be written to the > register DSB_CR. Bit[10:9] of the DSB_CR register is used to set > the DSB test mode. > > Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> > --- > .../ABI/testing/sysfs-bus-coresight-devices-tpdm | 10 ++++ > drivers/hwtracing/coresight/coresight-tpdm.c | 62 ++++++++++++++++++++++ > drivers/hwtracing/coresight/coresight-tpdm.h | 13 +++++ > 3 files changed, 85 insertions(+) > > diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm > index 27ce681..f13e282 100644 > --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm > +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm > @@ -35,3 +35,13 @@ Description: > Accepts only one of the 2 values - 0 or 1. > 0 : Set the DSB trigger type to false > 1 : Set the DSB trigger type to true > + > +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_mode > +Date: March 2023 > +KernelVersion 6.3 > +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> > +Description: > + (Write) Set the mode of DSB tpdm. Read the mode of DSB > + tpdm. > + > + Accepts the value needs to be greater than 0. Please could you document the values ? > diff --git a/drivers/hwtracing/coresight/coresight-tpdm.c b/drivers/hwtracing/coresight/coresight-tpdm.c > index e28cf10..8cd822f 100644 > --- a/drivers/hwtracing/coresight/coresight-tpdm.c > +++ b/drivers/hwtracing/coresight/coresight-tpdm.c > @@ -4,6 +4,7 @@ > */ > > #include <linux/amba/bus.h> > +#include <linux/bitfield.h> > #include <linux/bitmap.h> > #include <linux/coresight.h> > #include <linux/coresight-pmu.h> > @@ -51,6 +52,32 @@ static int tpdm_init_datasets(struct tpdm_drvdata *drvdata) > return 0; > } > > +static void set_dsb_cycacc_mode(struct tpdm_drvdata *drvdata, u32 *val) > +{ > + u32 mode; > + > + mode = TPDM_DSB_MODE_CYCACC(drvdata->dsb->mode); > + *val &= ~TPDM_DSB_TEST_MODE; > + *val |= FIELD_PREP(TPDM_DSB_TEST_MODE, mode); > +} > + > +static void set_dsb_hpsel_mode(struct tpdm_drvdata *drvdata, u32 *val) > +{ > + u32 mode; > + > + mode = TPDM_DSB_MODE_HPBYTESEL(drvdata->dsb->mode); > + *val &= ~TPDM_DSB_HPSEL; > + *val |= FIELD_PREP(TPDM_DSB_HPSEL, mode); > +} > + > +static void set_dsb_perf_mode(struct tpdm_drvdata *drvdata, u32 *val) > +{ > + if (drvdata->dsb->mode & TPDM_DSB_MODE_PERF) > + *val |= TPDM_DSB_CR_MODE; > + else > + *val &= ~TPDM_DSB_CR_MODE; > +} > + > static void set_trigger_type(struct tpdm_drvdata *drvdata, u32 *val) > { > if (drvdata->dsb->trig_type) > @@ -72,6 +99,12 @@ static void tpdm_enable_dsb(struct tpdm_drvdata *drvdata) > writel_relaxed(val, drvdata->base + TPDM_DSB_TIER); > > val = readl_relaxed(drvdata->base + TPDM_DSB_CR); > + /* Set the cycle accurate mode */ > + set_dsb_cycacc_mode(drvdata, &val); > + /* Set the byte lane for high-performance mode */ > + set_dsb_hpsel_mode(drvdata, &val); > + /* Set the performance mode */ > + set_dsb_perf_mode(drvdata, &val); > /* Set trigger type */ > set_trigger_type(drvdata, &val); > /* Set the enable bit of DSB control register to 1 */ > @@ -250,6 +283,34 @@ static struct attribute_group tpdm_attr_grp = { > .attrs = tpdm_attrs, > }; > > +static ssize_t dsb_mode_show(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent); > + > + return sysfs_emit(buf, "%lx\n", > + (unsigned long)drvdata->dsb->mode); > +} > + > +static ssize_t dsb_mode_store(struct device *dev, > + struct device_attribute *attr, > + const char *buf, > + size_t size) > +{ > + struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent); > + unsigned long val; > + > + if ((kstrtoul(buf, 0, &val)) || val < 0) > + return -EINVAL; > + > + spin_lock(&drvdata->spinlock); > + drvdata->dsb->mode = val & TPDM_MODE_ALL; > + spin_unlock(&drvdata->spinlock); > + return size; > +} > +static DEVICE_ATTR_RW(dsb_mode); > + > static ssize_t dsb_trig_type_show(struct device *dev, > struct device_attribute *attr, > char *buf) > @@ -321,6 +382,7 @@ static ssize_t dsb_trig_ts_store(struct device *dev, > static DEVICE_ATTR_RW(dsb_trig_ts); > > static struct attribute *tpdm_dsb_attrs[] = { > + &dev_attr_dsb_mode.attr, > &dev_attr_dsb_trig_ts.attr, > &dev_attr_dsb_trig_type.attr, > NULL, > diff --git a/drivers/hwtracing/coresight/coresight-tpdm.h b/drivers/hwtracing/coresight/coresight-tpdm.h > index 68f33bd..8fee562 100644 > --- a/drivers/hwtracing/coresight/coresight-tpdm.h > +++ b/drivers/hwtracing/coresight/coresight-tpdm.h > @@ -15,11 +15,22 @@ > > /* Enable bit for DSB subunit */ > #define TPDM_DSB_CR_ENA BIT(0) > +/* Enable bit for DSB subunit perfmance mode */ > +#define TPDM_DSB_CR_MODE BIT(1) > /* Enable bit for DSB subunit trigger type */ > #define TPDM_DSB_CR_TRIG_TYPE BIT(12) > + > /* Enable bit for DSB subunit trigger timestamp */ > #define TPDM_DSB_TIER_XTRIG_TSENAB BIT(1) > > +/* DSB programming modes */ > +#define TPDM_DSB_MODE_CYCACC(val) (val & GENMASK(2, 0)) What do the values for the CYCACC mode mean ? > +#define TPDM_DSB_MODE_PERF BIT(3) > +#define TPDM_DSB_MODE_HPBYTESEL(val) (val & GENMASK(8, 4)) > +#define TPDM_MODE_ALL (0xFFFFFFF) > +#define TPDM_DSB_TEST_MODE GENMASK(11, 9) > +#define TPDM_DSB_HPSEL GENMASK(6, 2) Again what do the values mean ? Even if the kernel doesn't use them it would be good to document it. Suzuki > + > /* TPDM integration test registers */ > #define TPDM_ITATBCNTRL (0xEF0) > #define TPDM_ITCNTRL (0xF00) > @@ -48,10 +59,12 @@ > > /** > * struct dsb_dataset - specifics associated to dsb dataset > + * @mode: DSB programming mode > * @trig_ts: Enable/Disable trigger timestamp. > * @trig_type: Enable/Disable trigger type. > */ > struct dsb_dataset { > + u32 mode; > bool trig_ts; > bool trig_type; > };
Hi Suzuki, On 3/23/2023 10:55 PM, Suzuki K Poulose wrote: > On 23/03/2023 06:04, Tao Zhang wrote: >> Add node to set and show programming mode for TPDM DSB subunit. >> Once the DSB programming mode is set, it will be written to the >> register DSB_CR. Bit[10:9] of the DSB_CR register is used to set >> the DSB test mode. >> >> Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> >> --- >> .../ABI/testing/sysfs-bus-coresight-devices-tpdm | 10 ++++ >> drivers/hwtracing/coresight/coresight-tpdm.c | 62 >> ++++++++++++++++++++++ >> drivers/hwtracing/coresight/coresight-tpdm.h | 13 +++++ >> 3 files changed, 85 insertions(+) >> >> diff --git >> a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm >> b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm >> index 27ce681..f13e282 100644 >> --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm >> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm >> @@ -35,3 +35,13 @@ Description: >> Accepts only one of the 2 values - 0 or 1. >> 0 : Set the DSB trigger type to false >> 1 : Set the DSB trigger type to true >> + >> +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_mode >> +Date: March 2023 >> +KernelVersion 6.3 >> +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang >> (QUIC) <quic_taozha@quicinc.com> >> +Description: >> + (Write) Set the mode of DSB tpdm. Read the mode of DSB >> + tpdm. >> + >> + Accepts the value needs to be greater than 0. > > Please could you document the values ? I will update this in the next patch series. > >> diff --git a/drivers/hwtracing/coresight/coresight-tpdm.c >> b/drivers/hwtracing/coresight/coresight-tpdm.c >> index e28cf10..8cd822f 100644 >> --- a/drivers/hwtracing/coresight/coresight-tpdm.c >> +++ b/drivers/hwtracing/coresight/coresight-tpdm.c >> @@ -4,6 +4,7 @@ >> */ >> #include <linux/amba/bus.h> >> +#include <linux/bitfield.h> >> #include <linux/bitmap.h> >> #include <linux/coresight.h> >> #include <linux/coresight-pmu.h> >> @@ -51,6 +52,32 @@ static int tpdm_init_datasets(struct tpdm_drvdata >> *drvdata) >> return 0; >> } >> +static void set_dsb_cycacc_mode(struct tpdm_drvdata *drvdata, u32 >> *val) >> +{ >> + u32 mode; >> + >> + mode = TPDM_DSB_MODE_CYCACC(drvdata->dsb->mode); >> + *val &= ~TPDM_DSB_TEST_MODE; >> + *val |= FIELD_PREP(TPDM_DSB_TEST_MODE, mode); >> +} >> + >> +static void set_dsb_hpsel_mode(struct tpdm_drvdata *drvdata, u32 *val) >> +{ >> + u32 mode; >> + >> + mode = TPDM_DSB_MODE_HPBYTESEL(drvdata->dsb->mode); >> + *val &= ~TPDM_DSB_HPSEL; >> + *val |= FIELD_PREP(TPDM_DSB_HPSEL, mode); >> +} >> + >> +static void set_dsb_perf_mode(struct tpdm_drvdata *drvdata, u32 *val) >> +{ >> + if (drvdata->dsb->mode & TPDM_DSB_MODE_PERF) >> + *val |= TPDM_DSB_CR_MODE; >> + else >> + *val &= ~TPDM_DSB_CR_MODE; >> +} >> + >> static void set_trigger_type(struct tpdm_drvdata *drvdata, u32 *val) >> { >> if (drvdata->dsb->trig_type) >> @@ -72,6 +99,12 @@ static void tpdm_enable_dsb(struct tpdm_drvdata >> *drvdata) >> writel_relaxed(val, drvdata->base + TPDM_DSB_TIER); >> val = readl_relaxed(drvdata->base + TPDM_DSB_CR); >> + /* Set the cycle accurate mode */ >> + set_dsb_cycacc_mode(drvdata, &val); >> + /* Set the byte lane for high-performance mode */ >> + set_dsb_hpsel_mode(drvdata, &val); >> + /* Set the performance mode */ >> + set_dsb_perf_mode(drvdata, &val); >> /* Set trigger type */ >> set_trigger_type(drvdata, &val); >> /* Set the enable bit of DSB control register to 1 */ >> @@ -250,6 +283,34 @@ static struct attribute_group tpdm_attr_grp = { >> .attrs = tpdm_attrs, >> }; >> +static ssize_t dsb_mode_show(struct device *dev, >> + struct device_attribute *attr, >> + char *buf) >> +{ >> + struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent); >> + >> + return sysfs_emit(buf, "%lx\n", >> + (unsigned long)drvdata->dsb->mode); >> +} >> + >> +static ssize_t dsb_mode_store(struct device *dev, >> + struct device_attribute *attr, >> + const char *buf, >> + size_t size) >> +{ >> + struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent); >> + unsigned long val; >> + >> + if ((kstrtoul(buf, 0, &val)) || val < 0) >> + return -EINVAL; >> + >> + spin_lock(&drvdata->spinlock); >> + drvdata->dsb->mode = val & TPDM_MODE_ALL; >> + spin_unlock(&drvdata->spinlock); >> + return size; >> +} >> +static DEVICE_ATTR_RW(dsb_mode); >> + >> static ssize_t dsb_trig_type_show(struct device *dev, >> struct device_attribute *attr, >> char *buf) >> @@ -321,6 +382,7 @@ static ssize_t dsb_trig_ts_store(struct device *dev, >> static DEVICE_ATTR_RW(dsb_trig_ts); >> static struct attribute *tpdm_dsb_attrs[] = { >> + &dev_attr_dsb_mode.attr, >> &dev_attr_dsb_trig_ts.attr, >> &dev_attr_dsb_trig_type.attr, >> NULL, >> diff --git a/drivers/hwtracing/coresight/coresight-tpdm.h >> b/drivers/hwtracing/coresight/coresight-tpdm.h >> index 68f33bd..8fee562 100644 >> --- a/drivers/hwtracing/coresight/coresight-tpdm.h >> +++ b/drivers/hwtracing/coresight/coresight-tpdm.h >> @@ -15,11 +15,22 @@ >> /* Enable bit for DSB subunit */ >> #define TPDM_DSB_CR_ENA BIT(0) >> +/* Enable bit for DSB subunit perfmance mode */ >> +#define TPDM_DSB_CR_MODE BIT(1) >> /* Enable bit for DSB subunit trigger type */ >> #define TPDM_DSB_CR_TRIG_TYPE BIT(12) >> + >> /* Enable bit for DSB subunit trigger timestamp */ >> #define TPDM_DSB_TIER_XTRIG_TSENAB BIT(1) >> +/* DSB programming modes */ >> +#define TPDM_DSB_MODE_CYCACC(val) (val & GENMASK(2, 0)) > > What do the values for the CYCACC mode mean ? It means cycle accurate mode. The targets may no longer have that mode. I will make a final check and update this in the next patch series. > >> +#define TPDM_DSB_MODE_PERF BIT(3) >> +#define TPDM_DSB_MODE_HPBYTESEL(val) (val & GENMASK(8, 4)) >> +#define TPDM_MODE_ALL (0xFFFFFFF) >> +#define TPDM_DSB_TEST_MODE GENMASK(11, 9) >> +#define TPDM_DSB_HPSEL GENMASK(6, 2) > > Again what do the values mean ? Even if the kernel doesn't use them > it would be good to document it. I will update this in the next patch series. Tao > > Suzuki > >> + >> /* TPDM integration test registers */ >> #define TPDM_ITATBCNTRL (0xEF0) >> #define TPDM_ITCNTRL (0xF00) >> @@ -48,10 +59,12 @@ >> /** >> * struct dsb_dataset - specifics associated to dsb dataset >> + * @mode: DSB programming mode >> * @trig_ts: Enable/Disable trigger timestamp. >> * @trig_type: Enable/Disable trigger type. >> */ >> struct dsb_dataset { >> + u32 mode; >> bool trig_ts; >> bool trig_type; >> }; > > _______________________________________________ > CoreSight mailing list -- coresight@lists.linaro.org > To unsubscribe send an email to coresight-leave@lists.linaro.org
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm index 27ce681..f13e282 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm @@ -35,3 +35,13 @@ Description: Accepts only one of the 2 values - 0 or 1. 0 : Set the DSB trigger type to false 1 : Set the DSB trigger type to true + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_mode +Date: March 2023 +KernelVersion 6.3 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (Write) Set the mode of DSB tpdm. Read the mode of DSB + tpdm. + + Accepts the value needs to be greater than 0. diff --git a/drivers/hwtracing/coresight/coresight-tpdm.c b/drivers/hwtracing/coresight/coresight-tpdm.c index e28cf10..8cd822f 100644 --- a/drivers/hwtracing/coresight/coresight-tpdm.c +++ b/drivers/hwtracing/coresight/coresight-tpdm.c @@ -4,6 +4,7 @@ */ #include <linux/amba/bus.h> +#include <linux/bitfield.h> #include <linux/bitmap.h> #include <linux/coresight.h> #include <linux/coresight-pmu.h> @@ -51,6 +52,32 @@ static int tpdm_init_datasets(struct tpdm_drvdata *drvdata) return 0; } +static void set_dsb_cycacc_mode(struct tpdm_drvdata *drvdata, u32 *val) +{ + u32 mode; + + mode = TPDM_DSB_MODE_CYCACC(drvdata->dsb->mode); + *val &= ~TPDM_DSB_TEST_MODE; + *val |= FIELD_PREP(TPDM_DSB_TEST_MODE, mode); +} + +static void set_dsb_hpsel_mode(struct tpdm_drvdata *drvdata, u32 *val) +{ + u32 mode; + + mode = TPDM_DSB_MODE_HPBYTESEL(drvdata->dsb->mode); + *val &= ~TPDM_DSB_HPSEL; + *val |= FIELD_PREP(TPDM_DSB_HPSEL, mode); +} + +static void set_dsb_perf_mode(struct tpdm_drvdata *drvdata, u32 *val) +{ + if (drvdata->dsb->mode & TPDM_DSB_MODE_PERF) + *val |= TPDM_DSB_CR_MODE; + else + *val &= ~TPDM_DSB_CR_MODE; +} + static void set_trigger_type(struct tpdm_drvdata *drvdata, u32 *val) { if (drvdata->dsb->trig_type) @@ -72,6 +99,12 @@ static void tpdm_enable_dsb(struct tpdm_drvdata *drvdata) writel_relaxed(val, drvdata->base + TPDM_DSB_TIER); val = readl_relaxed(drvdata->base + TPDM_DSB_CR); + /* Set the cycle accurate mode */ + set_dsb_cycacc_mode(drvdata, &val); + /* Set the byte lane for high-performance mode */ + set_dsb_hpsel_mode(drvdata, &val); + /* Set the performance mode */ + set_dsb_perf_mode(drvdata, &val); /* Set trigger type */ set_trigger_type(drvdata, &val); /* Set the enable bit of DSB control register to 1 */ @@ -250,6 +283,34 @@ static struct attribute_group tpdm_attr_grp = { .attrs = tpdm_attrs, }; +static ssize_t dsb_mode_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent); + + return sysfs_emit(buf, "%lx\n", + (unsigned long)drvdata->dsb->mode); +} + +static ssize_t dsb_mode_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t size) +{ + struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent); + unsigned long val; + + if ((kstrtoul(buf, 0, &val)) || val < 0) + return -EINVAL; + + spin_lock(&drvdata->spinlock); + drvdata->dsb->mode = val & TPDM_MODE_ALL; + spin_unlock(&drvdata->spinlock); + return size; +} +static DEVICE_ATTR_RW(dsb_mode); + static ssize_t dsb_trig_type_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -321,6 +382,7 @@ static ssize_t dsb_trig_ts_store(struct device *dev, static DEVICE_ATTR_RW(dsb_trig_ts); static struct attribute *tpdm_dsb_attrs[] = { + &dev_attr_dsb_mode.attr, &dev_attr_dsb_trig_ts.attr, &dev_attr_dsb_trig_type.attr, NULL, diff --git a/drivers/hwtracing/coresight/coresight-tpdm.h b/drivers/hwtracing/coresight/coresight-tpdm.h index 68f33bd..8fee562 100644 --- a/drivers/hwtracing/coresight/coresight-tpdm.h +++ b/drivers/hwtracing/coresight/coresight-tpdm.h @@ -15,11 +15,22 @@ /* Enable bit for DSB subunit */ #define TPDM_DSB_CR_ENA BIT(0) +/* Enable bit for DSB subunit perfmance mode */ +#define TPDM_DSB_CR_MODE BIT(1) /* Enable bit for DSB subunit trigger type */ #define TPDM_DSB_CR_TRIG_TYPE BIT(12) + /* Enable bit for DSB subunit trigger timestamp */ #define TPDM_DSB_TIER_XTRIG_TSENAB BIT(1) +/* DSB programming modes */ +#define TPDM_DSB_MODE_CYCACC(val) (val & GENMASK(2, 0)) +#define TPDM_DSB_MODE_PERF BIT(3) +#define TPDM_DSB_MODE_HPBYTESEL(val) (val & GENMASK(8, 4)) +#define TPDM_MODE_ALL (0xFFFFFFF) +#define TPDM_DSB_TEST_MODE GENMASK(11, 9) +#define TPDM_DSB_HPSEL GENMASK(6, 2) + /* TPDM integration test registers */ #define TPDM_ITATBCNTRL (0xEF0) #define TPDM_ITCNTRL (0xF00) @@ -48,10 +59,12 @@ /** * struct dsb_dataset - specifics associated to dsb dataset + * @mode: DSB programming mode * @trig_ts: Enable/Disable trigger timestamp. * @trig_type: Enable/Disable trigger type. */ struct dsb_dataset { + u32 mode; bool trig_ts; bool trig_type; };
Add node to set and show programming mode for TPDM DSB subunit. Once the DSB programming mode is set, it will be written to the register DSB_CR. Bit[10:9] of the DSB_CR register is used to set the DSB test mode. Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> --- .../ABI/testing/sysfs-bus-coresight-devices-tpdm | 10 ++++ drivers/hwtracing/coresight/coresight-tpdm.c | 62 ++++++++++++++++++++++ drivers/hwtracing/coresight/coresight-tpdm.h | 13 +++++ 3 files changed, 85 insertions(+)