Message ID | 1715231698-451-3-git-send-email-shengjiu.wang@nxp.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | arm64: dts: imx8mp-evk: support bt-sco sound card | expand |
On Thu, May 9, 2024 at 8:37 AM Shengjiu Wang <shengjiu.wang@nxp.com> wrote: > > Add bt-sco sound card, which is used by BT HFP case. > It supports wb profile as default > > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> > --- > arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 44 ++++++++++++++++++++ > 1 file changed, 44 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts > index 8be5b2a57f27..b2225cb710b6 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts > +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts > @@ -114,6 +114,11 @@ reg_vext_3v3: regulator-vext-3v3 { > regulator-max-microvolt = <3300000>; > }; > > + audio_codec_bt_sco: audio-codec-bt-sco { > + compatible = "linux,bt-sco"; > + #sound-dai-cells = <1>; > + }; > + > sound { > compatible = "simple-audio-card"; > simple-audio-card,name = "wm8960-audio"; > @@ -145,6 +150,25 @@ simple-audio-card,codec { > > }; > > + sound-bt-sco { > + compatible = "simple-audio-card"; > + simple-audio-card,name = "bt-sco-audio"; > + simple-audio-card,format = "dsp_a"; > + simple-audio-card,bitclock-inversion; > + simple-audio-card,frame-master = <&btcpu>; > + simple-audio-card,bitclock-master = <&btcpu>; > + > + btcpu: simple-audio-card,cpu { > + sound-dai = <&sai2>; > + dai-tdm-slot-num = <2>; > + dai-tdm-slot-width = <16>; > + }; > + > + simple-audio-card,codec { > + sound-dai = <&audio_codec_bt_sco 1>; > + }; > + }; > + > sound-hdmi { > compatible = "fsl,imx-audio-hdmi"; > model = "audio-hdmi"; > @@ -608,6 +632,17 @@ &pwm4 { > status = "okay"; > }; > > +&sai2 { > + #sound-dai-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_sai2>; > + assigned-clocks = <&clk IMX8MP_CLK_SAI2>; > + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; > + assigned-clock-rates = <12288000>; > + fsl,sai-mclk-direction-output; > + status = "okay"; > +}; > + > &sai3 { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_sai3>; > @@ -880,6 +915,15 @@ MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS 0x140 > >; > }; > > + pinctrl_sai2: sai2grp { > + fsl,pins = < > + MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6 > + MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6 > + MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6 > + MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0xd6 > + >; > + }; > + > pinctrl_sai3: sai3grp { > fsl,pins = < > MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6 > -- > 2.34.1 > >
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 8be5b2a57f27..b2225cb710b6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -114,6 +114,11 @@ reg_vext_3v3: regulator-vext-3v3 { regulator-max-microvolt = <3300000>; }; + audio_codec_bt_sco: audio-codec-bt-sco { + compatible = "linux,bt-sco"; + #sound-dai-cells = <1>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "wm8960-audio"; @@ -145,6 +150,25 @@ simple-audio-card,codec { }; + sound-bt-sco { + compatible = "simple-audio-card"; + simple-audio-card,name = "bt-sco-audio"; + simple-audio-card,format = "dsp_a"; + simple-audio-card,bitclock-inversion; + simple-audio-card,frame-master = <&btcpu>; + simple-audio-card,bitclock-master = <&btcpu>; + + btcpu: simple-audio-card,cpu { + sound-dai = <&sai2>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + + simple-audio-card,codec { + sound-dai = <&audio_codec_bt_sco 1>; + }; + }; + sound-hdmi { compatible = "fsl,imx-audio-hdmi"; model = "audio-hdmi"; @@ -608,6 +632,17 @@ &pwm4 { status = "okay"; }; +&sai2 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MP_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &sai3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai3>; @@ -880,6 +915,15 @@ MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS 0x140 >; }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0xd6 + >; + }; + pinctrl_sai3: sai3grp { fsl,pins = < MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6
Add bt-sco sound card, which is used by BT HFP case. It supports wb profile as default Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> --- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 44 ++++++++++++++++++++ 1 file changed, 44 insertions(+)