diff mbox

[v2,1/2] ARM: dts: imx6ul-14x14-evk: Add ksz8081 phy properties

Message ID 1adf8f0d44afec4d11dec7f09d54d37d58cda5ff.1496224930.git.leonard.crestez@nxp.com (mailing list archive)
State New, archived
Headers show

Commit Message

Leonard Crestez May 31, 2017, 10:29 a.m. UTC 
Right now mach-imx6ul registers a fixup for the ksz8081 phy. The same
register values can be set through the micrel phy driver by using dts
properties.

This seems preferable and allows cleanly fixing suspend/resume.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 arch/arm/boot/dts/imx6ul-14x14-evk.dts | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Florian Fainelli May 31, 2017, 9:52 p.m. UTC | #1 
On 05/31/2017 03:29 AM, Leonard Crestez wrote:
> Right now mach-imx6ul registers a fixup for the ksz8081 phy. The same
> register values can be set through the micrel phy driver by using dts
> properties.
> 
> This seems preferable and allows cleanly fixing suspend/resume.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
index f18e1f1..d2be8aa 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@@ -120,10 +120,16 @@ 
 
 		ethphy0: ethernet-phy@2 {
 			reg = <2>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 		};
 
 		ethphy1: ethernet-phy@1 {
 			reg = <1>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
 		};
 	};
 };