[GIT,PULL] amlogic ARM64 DT updates for v6.4

Pull-request

https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git tags/amlogic-arm64-dt-for-v6.4

Message

Neil Armstrong April 4, 2023, 9:23 a.m. UTC

Hi,

Here's a set of Amlogic ARM64 DT changeset for v6.4.

New boards are added:
  - BananaPi M2S, which can be mounted with pin2pin compatibles A311D or S922X SoCs
  - BPI-CM4 module with BPI-CM4IO baseboard, a RPI CM4 compatible module & baseboard

The other changes are DT fixes for dt-schema checks, gpio_intc for A1, new GXL MDIO
multiplexer for GXL and audio & bluetooth support on gxbb-kii-pro.


Neil

The following changes since commit fe15c26ee26efa11741a7b632e9f23b01aca4cc6:

   Linux 6.3-rc1 (2023-03-05 14:52:03 -0800)

are available in the Git repository at:

   https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git tags/amlogic-arm64-dt-for-v6.4

for you to fetch changes up to 0262f2736978b1763363224698f47112a148dab0:

   arm64: dts: amlogic: Add initial support for BPI-CM4 module with BPI-CM4IO baseboard (2023-03-07 09:02:03 +0100)

----------------------------------------------------------------
Amlogic ARM64 DT changes for v6.4:
- set of DT bindings check fixes
- adjust order of some compatibles to match dt-schema migration
- add support for BananaPi M2S variants
- gxbb-kii-pro: add audio & bluetooth support
- meson-a1: add gpio_intc node
- gxl: use gxl mdio multiplexer
- Add initial support for BPI-CM4 module with BPI-CM4IO baseboard

----------------------------------------------------------------
Alexey Romanov (1):
       arm64: dts: meson-a1: add gpio_intc node

Christian Hewitt (5):
       dt-bindings: arm: amlogic: add support for BananaPi M2S variants
       arm64: dts: meson: add support for BananaPi M2S variants
       arm64: dts: meson: gxbb-kii-pro: sort and tidy the dts
       arm64: dts: meson: gxbb-kii-pro: complete the bluetooth node
       arm64: dts: meson: gxbb-kii-pro: add initial audio support

Heiner Kallweit (1):
       arm64: dts: meson: adjust order of some compatibles

Jerome Brunet (1):
       arm64: dts: amlogic: gxl: use gxl mdio multiplexer

Neil Armstrong (10):
       arm64: dts: amlogic: meson-sm1-bananapi: correct usb-hub hog node name
       arm64: dts: amlogic: meson-gxm-s912-libretech-pc: add simple connector node in fusb302 node
       arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: remove invalid #gpio-cells in onewire node
       arm64: dts: amlogic: meson-g12b-radxa-zero2: fix pwm clock names
       arm64: dts: amlogic: meson-g12b-odroid-go-ultra: rename keypad-gpio pinctrl node
       arm64: dts: amlogic: meson-s4: fix apb4 bus node name
       arm64: dts: amlogic: meson-sm1: use correct enable-gpios
       arm64: dts: amlogic: meson-gxm-s912-libretech-pc: remove unused pinctrl-names from phy node
       dt-bindings: arm: amlogic: Document the boards with the BPI-CM4 connected
       arm64: dts: amlogic: Add initial support for BPI-CM4 module with BPI-CM4IO baseboard

  Documentation/devicetree/bindings/arm/amlogic.yaml |  10 +
  arch/arm64/boot/dts/amlogic/Makefile               |   3 +
  arch/arm64/boot/dts/amlogic/meson-a1.dtsi          |  10 +
  .../dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi |   1 -
  .../dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts  |  37 ++
  .../dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts  | 165 +++++++
  .../boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi  | 388 +++++++++++++++
  .../boot/dts/amlogic/meson-g12b-bananapi.dtsi      | 521 +++++++++++++++++++++
  .../dts/amlogic/meson-g12b-odroid-go-ultra.dts     |   2 +-
  .../boot/dts/amlogic/meson-g12b-radxa-zero2.dts    |   6 +-
  .../dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts  |  14 +
  arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts |  82 +++-
  arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        |   4 +-
  .../amlogic/meson-gxl-s905x-libretech-cc-v2.dts    |   1 -
  arch/arm64/boot/dts/amlogic/meson-gxl.dtsi         |  29 +-
  .../dts/amlogic/meson-gxm-s912-libretech-pc.dts    |   4 +
  arch/arm64/boot/dts/amlogic/meson-s4.dtsi          |   2 +-
  .../arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi |   4 +-
  arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi  |   2 +-
  19 files changed, 1248 insertions(+), 37 deletions(-)
  create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts
  create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
  create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
  create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
  create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts