| Message ID | 20110704165627.GA10594@S2100-06.ap.freescale.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Jul 05, 2011 at 12:56:29AM +0800, Shawn Guo wrote: > On Mon, Jul 04, 2011 at 12:10:28AM -0600, Grant Likely wrote: > > On Sun, Jul 03, 2011 at 04:16:56PM +0800, Shawn Guo wrote: > > > The patch removes all the uses of cpu_is_mx(). Instead, it utilizes > > > platform_device_id to distinguish the gpio differences among SoCs. > > > > > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> > > > Cc: Grant Likely <grant.likely@secretlab.ca> > > > Cc: Sascha Hauer <s.hauer@pengutronix.de> > > > --- > > > arch/arm/mach-imx/mm-imx1.c | 8 +- > > > arch/arm/mach-imx/mm-imx21.c | 12 +- > > > arch/arm/mach-imx/mm-imx25.c | 8 +- > > > arch/arm/mach-imx/mm-imx27.c | 12 +- > > > arch/arm/mach-imx/mm-imx31.c | 6 +- > > > arch/arm/mach-imx/mm-imx35.c | 6 +- > > > arch/arm/mach-mx5/mm-mx50.c | 12 +- > > > arch/arm/mach-mx5/mm.c | 22 ++-- > > > arch/arm/plat-mxc/devices/platform-gpio-mxc.c | 4 +- > > > arch/arm/plat-mxc/include/mach/common.h | 2 +- > > > drivers/gpio/gpio-mxc.c | 123 +++++++++++++++++++++---- > > > 11 files changed, 151 insertions(+), 64 deletions(-) > > > > > > diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c > > > index f2a6566..2bded59 100644 > > > --- a/arch/arm/mach-imx/mm-imx1.c > > > +++ b/arch/arm/mach-imx/mm-imx1.c > > > @@ -50,12 +50,12 @@ void __init mx1_init_irq(void) > > > > > > void __init imx1_soc_init(void) > > > { > > > - mxc_register_gpio(0, MX1_GPIO1_BASE_ADDR, SZ_256, > > > + mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256, > > > MX1_GPIO_INT_PORTA, 0); > > > - mxc_register_gpio(1, MX1_GPIO2_BASE_ADDR, SZ_256, > > > + mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256, > > > MX1_GPIO_INT_PORTB, 0); > > > - mxc_register_gpio(2, MX1_GPIO3_BASE_ADDR, SZ_256, > > > + mxc_register_gpio("imx1-gpio", 2, MX1_GPIO3_BASE_ADDR, SZ_256, > > > MX1_GPIO_INT_PORTC, 0); > > > - mxc_register_gpio(3, MX1_GPIO4_BASE_ADDR, SZ_256, > > > + mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256, > > > MX1_GPIO_INT_PORTD, 0); > > > } > > > diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c > > > index 4f32a8a..d02e20d 100644 > > > --- a/arch/arm/mach-imx/mm-imx21.c > > > +++ b/arch/arm/mach-imx/mm-imx21.c > > > @@ -77,12 +77,12 @@ void __init mx21_init_irq(void) > > > > > > void __init imx21_soc_init(void) > > > { > > > - mxc_register_gpio(0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); > > > - mxc_register_gpio(1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); > > > - mxc_register_gpio(2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); > > > - mxc_register_gpio(3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); > > > - mxc_register_gpio(4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); > > > - mxc_register_gpio(5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); > > > + mxc_register_gpio("imx2-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); > > > + mxc_register_gpio("imx2-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); > > > + mxc_register_gpio("imx2-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); > > > + mxc_register_gpio("imx2-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); > > > + mxc_register_gpio("imx2-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); > > > + mxc_register_gpio("imx2-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); > > > > > > imx_add_imx_dma(); > > > } > > > diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c > > > index 1e0c956..bbe93a5 100644 > > > --- a/arch/arm/mach-imx/mm-imx25.c > > > +++ b/arch/arm/mach-imx/mm-imx25.c > > > @@ -86,10 +86,10 @@ static struct sdma_platform_data imx25_sdma_pdata __initdata = { > > > > > > void __init imx25_soc_init(void) > > > { > > > - mxc_register_gpio(0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0); > > > - mxc_register_gpio(1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0); > > > - mxc_register_gpio(2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0); > > > - mxc_register_gpio(3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0); > > > + mxc_register_gpio("imx-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0); > > > + mxc_register_gpio("imx-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0); > > > + mxc_register_gpio("imx-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0); > > > + mxc_register_gpio("imx-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0); > > > > > > imx_add_imx_sdma(MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata); > > > } > > > diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c > > > index 944e02d..5a62969 100644 > > > --- a/arch/arm/mach-imx/mm-imx27.c > > > +++ b/arch/arm/mach-imx/mm-imx27.c > > > @@ -77,12 +77,12 @@ void __init mx27_init_irq(void) > > > > > > void __init imx27_soc_init(void) > > > { > > > - mxc_register_gpio(0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); > > > - mxc_register_gpio(1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); > > > - mxc_register_gpio(2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); > > > - mxc_register_gpio(3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); > > > - mxc_register_gpio(4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); > > > - mxc_register_gpio(5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); > > > + mxc_register_gpio("imx2-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); > > > + mxc_register_gpio("imx2-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); > > > + mxc_register_gpio("imx2-gpio", 2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); > > > + mxc_register_gpio("imx2-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); > > > + mxc_register_gpio("imx2-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); > > > + mxc_register_gpio("imx2-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); > > > > > > imx_add_imx_dma(); > > > } > > > diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c > > > index a1ff96f..7017c4a 100644 > > > --- a/arch/arm/mach-imx/mm-imx31.c > > > +++ b/arch/arm/mach-imx/mm-imx31.c > > > @@ -78,9 +78,9 @@ void __init imx31_soc_init(void) > > > { > > > int to_version = mx31_revision() >> 4; > > > > > > - mxc_register_gpio(0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0); > > > - mxc_register_gpio(1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); > > > - mxc_register_gpio(2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); > > > + mxc_register_gpio("imx-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0); > > > + mxc_register_gpio("imx-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); > > > + mxc_register_gpio("imx-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); > > > > > > if (to_version == 1) { > > > strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin", > > > diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c > > > index da530ca..568a5c6 100644 > > > --- a/arch/arm/mach-imx/mm-imx35.c > > > +++ b/arch/arm/mach-imx/mm-imx35.c > > > @@ -95,9 +95,9 @@ void __init imx35_soc_init(void) > > > { > > > int to_version = mx35_revision() >> 4; > > > > > > - mxc_register_gpio(0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); > > > - mxc_register_gpio(1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); > > > - mxc_register_gpio(2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); > > > + mxc_register_gpio("imx-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); > > > + mxc_register_gpio("imx-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); > > > + mxc_register_gpio("imx-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); > > > > > > if (to_version == 1) { > > > strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin", > > > diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c > > > index 28c3f60..39e4a17 100644 > > > --- a/arch/arm/mach-mx5/mm-mx50.c > > > +++ b/arch/arm/mach-mx5/mm-mx50.c > > > @@ -62,10 +62,10 @@ void __init mx50_init_irq(void) > > > > > > void __init imx50_soc_init(void) > > > { > > > - mxc_register_gpio(0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH); > > > - mxc_register_gpio(1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH); > > > - mxc_register_gpio(2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH); > > > - mxc_register_gpio(3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH); > > > - mxc_register_gpio(4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH); > > > - mxc_register_gpio(5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH); > > > + mxc_register_gpio("imx-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH); > > > + mxc_register_gpio("imx-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH); > > > + mxc_register_gpio("imx-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH); > > > + mxc_register_gpio("imx-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH); > > > + mxc_register_gpio("imx-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH); > > > + mxc_register_gpio("imx-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH); > > > } > > > diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c > > > index 1b7059f..1444140 100644 > > > --- a/arch/arm/mach-mx5/mm.c > > > +++ b/arch/arm/mach-mx5/mm.c > > > @@ -142,23 +142,23 @@ static struct sdma_platform_data imx53_sdma_pdata __initdata = { > > > > > > void __init imx51_soc_init(void) > > > { > > > - mxc_register_gpio(0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH); > > > - mxc_register_gpio(1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH); > > > - mxc_register_gpio(2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH); > > > - mxc_register_gpio(3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH); > > > + mxc_register_gpio("imx-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH); > > > + mxc_register_gpio("imx-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH); > > > + mxc_register_gpio("imx-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH); > > > + mxc_register_gpio("imx-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH); > > > > > > imx_add_imx_sdma(MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata); > > > } > > > > > > void __init imx53_soc_init(void) > > > { > > > - mxc_register_gpio(0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH); > > > - mxc_register_gpio(1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH); > > > - mxc_register_gpio(2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH); > > > - mxc_register_gpio(3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH); > > > - mxc_register_gpio(4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH); > > > - mxc_register_gpio(5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); > > > - mxc_register_gpio(6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); > > > + mxc_register_gpio("imx-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH); > > > + mxc_register_gpio("imx-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH); > > > + mxc_register_gpio("imx-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH); > > > + mxc_register_gpio("imx-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH); > > > + mxc_register_gpio("imx-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH); > > > + mxc_register_gpio("imx-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); > > > + mxc_register_gpio("imx-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); > > > > > > imx_add_imx_sdma(MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata); > > > } > > > diff --git a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c > > > index cf1b7fd..a7919a2 100644 > > > --- a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c > > > +++ b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c > > > @@ -8,7 +8,7 @@ > > > */ > > > #include <mach/devices-common.h> > > > > > > -struct platform_device *__init mxc_register_gpio(int id, > > > +struct platform_device *__init mxc_register_gpio(char *name, int id, > > > resource_size_t iobase, resource_size_t iosize, int irq, int irq_high) > > > { > > > struct resource res[] = { > > > @@ -28,5 +28,5 @@ struct platform_device *__init mxc_register_gpio(int id, > > > }; > > > > > > return platform_device_register_resndata(&mxc_aips_bus, > > > - "gpio-mxc", id, res, ARRAY_SIZE(res), NULL, 0); > > > + name, id, res, ARRAY_SIZE(res), NULL, 0); > > > } > > > diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h > > > index 91fa263..4e3d978 100644 > > > --- a/arch/arm/plat-mxc/include/mach/common.h > > > +++ b/arch/arm/plat-mxc/include/mach/common.h > > > @@ -64,7 +64,7 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, > > > unsigned long ckih1, unsigned long ckih2); > > > extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, > > > unsigned long ckih1, unsigned long ckih2); > > > -extern struct platform_device *mxc_register_gpio(int id, > > > +extern struct platform_device *mxc_register_gpio(char *name, int id, > > > resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); > > > extern int mxc_register_device(struct platform_device *pdev, void *data); > > > extern void mxc_set_cpu_type(unsigned int type); > > > diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c > > > index 2f6a81b..7ae71d6 100644 > > > --- a/drivers/gpio/gpio-mxc.c > > > +++ b/drivers/gpio/gpio-mxc.c > > > @@ -27,9 +27,34 @@ > > > #include <linux/platform_device.h> > > > #include <linux/slab.h> > > > #include <linux/basic_mmio_gpio.h> > > > -#include <mach/hardware.h> > > > #include <asm-generic/bug.h> > > > > > > +enum mxc_gpio_type { > > > + IMX1_GPIO, > > > + IMX2_GPIO, > > > + IMX_GPIO, > > > +}; > > > + > > > +/* device type dependent stuff */ > > > +struct mxc_gpio_hwdata { > > > + unsigned dr_reg; > > > + unsigned gdir_reg; > > > + unsigned psr_reg; > > > + unsigned icr1_reg; > > > + unsigned icr2_reg; > > > + unsigned imr_reg; > > > + unsigned isr_reg; > > > + unsigned low_level; > > > + unsigned high_level; > > > + unsigned rise_edge; > > > + unsigned fall_edge; > > > +}; > > > + > > > +struct mxc_gpio_data { > > > + struct mxc_gpio_hwdata *hwdata; > > > + enum mxc_gpio_type devtype; > > > +}; > > > + > > > struct mxc_gpio_port { > > > struct list_head node; > > > void __iomem *base; > > > @@ -38,6 +63,82 @@ struct mxc_gpio_port { > > > int virtual_irq_start; > > > struct bgpio_chip bgc; > > > u32 both_edges; > > > + struct mxc_gpio_data *devdata; > > > +}; > > > + > > > +#define IS_IMX2_GPIO() (port->devdata->devtype == IMX2_GPIO) > > > > 'tis better to program in C than CPP. :) A static inline would go better > > here. > > > > Also, when you change to using discrete mxc_gpio_hwdata > > instances instead of a single table, you can change this test to be: > > > > static inline int is_imx2_gpio(port) { > > return port->devdata == &imx2_gpio_hwdata; > > } > > > imx1 and imx2 shares the same hwdata, so we can not use the approach > to distinguish imx2 from imx1. > > Anyway, I'm killing IS_IMX2_GPIO since it's only used once and does > not deserve a macro or inline function. > > > > + > > > +#define GPIO_DR (port->devdata->hwdata->dr_reg) > > > +#define GPIO_GDIR (port->devdata->hwdata->gdir_reg) > > > +#define GPIO_PSR (port->devdata->hwdata->psr_reg) > > > +#define GPIO_ICR1 (port->devdata->hwdata->icr1_reg) > > > +#define GPIO_ICR2 (port->devdata->hwdata->icr2_reg) > > > +#define GPIO_IMR (port->devdata->hwdata->imr_reg) > > > +#define GPIO_ISR (port->devdata->hwdata->isr_reg) > > > + > > > +#define GPIO_INT_LOW_LEV (port->devdata->hwdata->low_level) > > > +#define GPIO_INT_HIGH_LEV (port->devdata->hwdata->high_level) > > > +#define GPIO_INT_RISE_EDGE (port->devdata->hwdata->rise_edge) > > > +#define GPIO_INT_FALL_EDGE (port->devdata->hwdata->fall_edge) > > > +#define GPIO_INT_NONE 0x4 > > > > This ends up creating a lot more indirection in the driver which may > > have a measurable have a performance impact. Plus, these new macros > > depend on local context that will break in unexpected ways if someone > > changes the 'port' name. > > > > Unfortunately, to fix this property will require a lot more lines of > > code change because every GPIO_* reference will need to be fixed, but > > I'd rather see that than a set of ugly macros that just happen to be > > convenient in the short term. > > > The comments remind me one fact that these stuff are actually soc > dependent than port, because we can never run on a soc that gets > UART1 as IMX1_GPIO while UART2 as IMX2_GPIO. The fact is if we are > running on IMX1, all UART ports must be IMX1_GPIO, and if on IMX2, > all ports must be IMX2_GPIO. Based on this observation, we can > define global static variables for hwdata and hwtype and get them > set up during probe for only one port, so that your above two concerns > can be address without touch every GPIO_* lines. Here is the patch. > Please let me know what you think. Sure, if you want to do it that way. I'm personally not fond of the approach, but I don't see anything dangerous with it other than it will require a refactoring of the driver if the assumption above ever proves to be untrue on a future device. I won't nack the patch over it though. g. > > ---8<----------- > diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c > index 2f6a81b..19a173c 100644 > --- a/drivers/gpio/gpio-mxc.c > +++ b/drivers/gpio/gpio-mxc.c > @@ -27,9 +27,29 @@ > #include <linux/platform_device.h> > #include <linux/slab.h> > #include <linux/basic_mmio_gpio.h> > -#include <mach/hardware.h> > #include <asm-generic/bug.h> > > +enum mxc_gpio_hwtype { > + IMX1_GPIO, > + IMX2_GPIO, > + IMX_GPIO, > +}; > + > +/* device type dependent stuff */ > +struct mxc_gpio_hwdata { > + unsigned dr_reg; > + unsigned gdir_reg; > + unsigned psr_reg; > + unsigned icr1_reg; > + unsigned icr2_reg; > + unsigned imr_reg; > + unsigned isr_reg; > + unsigned low_level; > + unsigned high_level; > + unsigned rise_edge; > + unsigned fall_edge; > +}; > + > struct mxc_gpio_port { > struct list_head node; > void __iomem *base; > @@ -40,6 +60,72 @@ struct mxc_gpio_port { > u32 both_edges; > }; > > +static struct mxc_gpio_hwdata imx1_imx2_gpio_hwdata = { > + .dr_reg = 0x1c, > + .gdir_reg = 0x00, > + .psr_reg = 0x24, > + .icr1_reg = 0x28, > + .icr2_reg = 0x2c, > + .imr_reg = 0x30, > + .isr_reg = 0x34, > + .low_level = 0x03, > + .high_level = 0x02, > + .rise_edge = 0x00, > + .fall_edge = 0x01, > +}; > + > +static struct mxc_gpio_hwdata imx_gpio_hwdata = { > + .dr_reg = 0x00, > + .gdir_reg = 0x04, > + .psr_reg = 0x08, > + .icr1_reg = 0x0c, > + .icr2_reg = 0x10, > + .imr_reg = 0x14, > + .isr_reg = 0x18, > + .low_level = 0x00, > + .high_level = 0x01, > + .rise_edge = 0x02, > + .fall_edge = 0x03, > +}; > + > +static enum mxc_gpio_hwtype mxs_gpio_hwtype; > +static struct mxc_gpio_hwdata *mxc_gpio_hwdata; > + > +#define GPIO_DR (mxc_gpio_hwdata->dr_reg) > +#define GPIO_GDIR (mxc_gpio_hwdata->gdir_reg) > +#define GPIO_PSR (mxc_gpio_hwdata->psr_reg) > +#define GPIO_ICR1 (mxc_gpio_hwdata->icr1_reg) > +#define GPIO_ICR2 (mxc_gpio_hwdata->icr2_reg) > +#define GPIO_IMR (mxc_gpio_hwdata->imr_reg) > +#define GPIO_ISR (mxc_gpio_hwdata->isr_reg) > + > +#define GPIO_INT_LOW_LEV (mxc_gpio_hwdata->low_level) > +#define GPIO_INT_HIGH_LEV (mxc_gpio_hwdata->high_level) > +#define GPIO_INT_RISE_EDGE (mxc_gpio_hwdata->rise_edge) > +#define GPIO_INT_FALL_EDGE (mxc_gpio_hwdata->fall_edge) > +#define GPIO_INT_NONE 0x4 > + > +static struct platform_device_id mxc_gpio_devtype[] = { > + { > + .name = "imx1-gpio", > + .driver_data = IMX1_GPIO, > + }, { > + .name = "imx21-gpio", > + .driver_data = IMX2_GPIO, > + }, { > + .name = "imx25-gpio", > + .driver_data = IMX_GPIO, > + }, { > + .name = "imx27-gpio", > + .driver_data = IMX2_GPIO, > + }, { > + .name = "imx-gpio", > + .driver_data = IMX_GPIO, > + }, { > + /* sentinel */ > + } > +}; > + > /* > * MX2 has one interrupt *for all* gpio ports. The list is used > * to save the references to all ports, so that mx2_gpio_irq_handler > @@ -47,22 +133,6 @@ struct mxc_gpio_port { > */ > static LIST_HEAD(mxc_gpio_ports); > > -#define cpu_is_mx1_mx2() (cpu_is_mx1() || cpu_is_mx2()) > - > -#define GPIO_DR (cpu_is_mx1_mx2() ? 0x1c : 0x00) > -#define GPIO_GDIR (cpu_is_mx1_mx2() ? 0x00 : 0x04) > -#define GPIO_PSR (cpu_is_mx1_mx2() ? 0x24 : 0x08) > -#define GPIO_ICR1 (cpu_is_mx1_mx2() ? 0x28 : 0x0C) > -#define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10) > -#define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14) > -#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18) > - > -#define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0) > -#define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1) > -#define GPIO_INT_RISE_EDGE (cpu_is_mx1_mx2() ? 0x0 : 0x2) > -#define GPIO_INT_FALL_EDGE (cpu_is_mx1_mx2() ? 0x1 : 0x3) > -#define GPIO_INT_NONE 0x4 > - > /* Note: This driver assumes 32 GPIOs are handled in one register */ > > static int gpio_set_irq_type(struct irq_data *d, u32 type) > @@ -236,12 +306,27 @@ static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port) > IRQ_NOREQUEST, 0); > } > > +static void __devinit mxc_gpio_get_hw(struct platform_device *pdev) > +{ > + if (mxc_gpio_hwdata) > + return; > + > + mxs_gpio_hwtype = pdev->id_entry->driver_data; > + > + if (mxs_gpio_hwtype == IMX1_GPIO || mxs_gpio_hwtype == IMX2_GPIO) > + mxc_gpio_hwdata = &imx1_imx2_gpio_hwdata; > + else > + mxc_gpio_hwdata = &imx_gpio_hwdata; > +} > + > static int __devinit mxc_gpio_probe(struct platform_device *pdev) > { > struct mxc_gpio_port *port; > struct resource *iores; > int err; > > + mxc_gpio_get_hw(pdev); > + > port = kzalloc(sizeof(struct mxc_gpio_port), GFP_KERNEL); > if (!port) > return -ENOMEM; > @@ -280,7 +365,7 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev) > /* gpio-mxc can be a generic irq chip */ > mxc_gpio_init_gc(port); > > - if (cpu_is_mx2()) { > + if (mxs_gpio_hwtype == IMX2_GPIO) { > /* setup one handler for all GPIO interrupts */ > if (pdev->id == 0) > irq_set_chained_handler(port->irq, > @@ -332,6 +417,7 @@ static struct platform_driver mxc_gpio_driver = { > .owner = THIS_MODULE, > }, > .probe = mxc_gpio_probe, > + .id_table = mxc_gpio_devtype, > }; > > static int __init gpio_mxc_init(void) > -- > 1.7.4.1 > -- > Regards, > Shawn >
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c index 2f6a81b..19a173c 100644 --- a/drivers/gpio/gpio-mxc.c +++ b/drivers/gpio/gpio-mxc.c @@ -27,9 +27,29 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/basic_mmio_gpio.h> -#include <mach/hardware.h> #include <asm-generic/bug.h> +enum mxc_gpio_hwtype { + IMX1_GPIO, + IMX2_GPIO, + IMX_GPIO, +}; + +/* device type dependent stuff */ +struct mxc_gpio_hwdata { + unsigned dr_reg; + unsigned gdir_reg; + unsigned psr_reg; + unsigned icr1_reg; + unsigned icr2_reg; + unsigned imr_reg; + unsigned isr_reg; + unsigned low_level; + unsigned high_level; + unsigned rise_edge; + unsigned fall_edge; +}; + struct mxc_gpio_port { struct list_head node; void __iomem *base; @@ -40,6 +60,72 @@ struct mxc_gpio_port { u32 both_edges; }; +static struct mxc_gpio_hwdata imx1_imx2_gpio_hwdata = { + .dr_reg = 0x1c, + .gdir_reg = 0x00, + .psr_reg = 0x24, + .icr1_reg = 0x28, + .icr2_reg = 0x2c, + .imr_reg = 0x30, + .isr_reg = 0x34, + .low_level = 0x03, + .high_level = 0x02, + .rise_edge = 0x00, + .fall_edge = 0x01, +}; + +static struct mxc_gpio_hwdata imx_gpio_hwdata = { + .dr_reg = 0x00, + .gdir_reg = 0x04, + .psr_reg = 0x08, + .icr1_reg = 0x0c, + .icr2_reg = 0x10, + .imr_reg = 0x14, + .isr_reg = 0x18, + .low_level = 0x00, + .high_level = 0x01, + .rise_edge = 0x02, + .fall_edge = 0x03, +}; + +static enum mxc_gpio_hwtype mxs_gpio_hwtype; +static struct mxc_gpio_hwdata *mxc_gpio_hwdata; + +#define GPIO_DR (mxc_gpio_hwdata->dr_reg) +#define GPIO_GDIR (mxc_gpio_hwdata->gdir_reg) +#define GPIO_PSR (mxc_gpio_hwdata->psr_reg) +#define GPIO_ICR1 (mxc_gpio_hwdata->icr1_reg) +#define GPIO_ICR2 (mxc_gpio_hwdata->icr2_reg) +#define GPIO_IMR (mxc_gpio_hwdata->imr_reg) +#define GPIO_ISR (mxc_gpio_hwdata->isr_reg) + +#define GPIO_INT_LOW_LEV (mxc_gpio_hwdata->low_level) +#define GPIO_INT_HIGH_LEV (mxc_gpio_hwdata->high_level) +#define GPIO_INT_RISE_EDGE (mxc_gpio_hwdata->rise_edge) +#define GPIO_INT_FALL_EDGE (mxc_gpio_hwdata->fall_edge) +#define GPIO_INT_NONE 0x4 + +static struct platform_device_id mxc_gpio_devtype[] = { + { + .name = "imx1-gpio", + .driver_data = IMX1_GPIO, + }, { + .name = "imx21-gpio", + .driver_data = IMX2_GPIO, + }, { + .name = "imx25-gpio", + .driver_data = IMX_GPIO, + }, { + .name = "imx27-gpio", + .driver_data = IMX2_GPIO, + }, { + .name = "imx-gpio", + .driver_data = IMX_GPIO, + }, { + /* sentinel */ + } +}; + /* * MX2 has one interrupt *for all* gpio ports. The list is used * to save the references to all ports, so that mx2_gpio_irq_handler @@ -47,22 +133,6 @@ struct mxc_gpio_port { */ static LIST_HEAD(mxc_gpio_ports); -#define cpu_is_mx1_mx2() (cpu_is_mx1() || cpu_is_mx2()) - -#define GPIO_DR (cpu_is_mx1_mx2() ? 0x1c : 0x00) -#define GPIO_GDIR (cpu_is_mx1_mx2() ? 0x00 : 0x04) -#define GPIO_PSR (cpu_is_mx1_mx2() ? 0x24 : 0x08) -#define GPIO_ICR1 (cpu_is_mx1_mx2() ? 0x28 : 0x0C) -#define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10) -#define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14) -#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18) - -#define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0) -#define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1) -#define GPIO_INT_RISE_EDGE (cpu_is_mx1_mx2() ? 0x0 : 0x2) -#define GPIO_INT_FALL_EDGE (cpu_is_mx1_mx2() ? 0x1 : 0x3) -#define GPIO_INT_NONE 0x4 - /* Note: This driver assumes 32 GPIOs are handled in one register */ static int gpio_set_irq_type(struct irq_data *d, u32 type) @@ -236,12 +306,27 @@ static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port) IRQ_NOREQUEST, 0); } +static void __devinit mxc_gpio_get_hw(struct platform_device *pdev) +{ + if (mxc_gpio_hwdata) + return; + + mxs_gpio_hwtype = pdev->id_entry->driver_data; + + if (mxs_gpio_hwtype == IMX1_GPIO || mxs_gpio_hwtype == IMX2_GPIO) + mxc_gpio_hwdata = &imx1_imx2_gpio_hwdata; + else + mxc_gpio_hwdata = &imx_gpio_hwdata; +} + static int __devinit mxc_gpio_probe(struct platform_device *pdev) { struct mxc_gpio_port *port; struct resource *iores; int err; + mxc_gpio_get_hw(pdev); + port = kzalloc(sizeof(struct mxc_gpio_port), GFP_KERNEL); if (!port) return -ENOMEM; @@ -280,7 +365,7 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev) /* gpio-mxc can be a generic irq chip */ mxc_gpio_init_gc(port); - if (cpu_is_mx2()) { + if (mxs_gpio_hwtype == IMX2_GPIO) { /* setup one handler for all GPIO interrupts */ if (pdev->id == 0) irq_set_chained_handler(port->irq, @@ -332,6 +417,7 @@ static struct platform_driver mxc_gpio_driver = { .owner = THIS_MODULE, }, .probe = mxc_gpio_probe, + .id_table = mxc_gpio_devtype, }; static int __init gpio_mxc_init(void)