@@ -89,11 +89,7 @@ static int omap2_enter_full_retention(void)
omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
- /*
- * Set MPU powerdomain's next power state to RETENTION;
- * preserve logic state during retention
- */
- pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+ pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
/* Workaround to kill USB */
@@ -136,6 +132,9 @@ no_sleep:
/* Mask future PRCM-to-MPU interrupts */
omap2_prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
+ pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON);
+
return 0;
}
@@ -185,17 +184,16 @@ static void omap2_enter_mpu_retention(void)
omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
/* Try to enter MPU retention */
- omap2_prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
- OMAP_LOGICRETSTATE_MASK,
- MPU_MOD, OMAP2_PM_PWSTCTRL);
+ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
} else {
/* Block MPU retention */
-
- omap2_prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD,
- OMAP2_PM_PWSTCTRL);
+ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
}
omap2_sram_idle();
+
+ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
}
static int omap2_can_sleep(void)
@@ -250,25 +248,17 @@ static void __init prcm_setup_regs(void)
for (i = 0; i < num_mem_banks; i++)
pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET);
- /* Set CORE powerdomain's next power state to RETENTION */
- pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
+ pwrdm_set_logic_retst(core_pwrdm, PWRDM_POWER_RET);
- /*
- * Set MPU powerdomain's next power state to RETENTION;
- * preserve logic state during retention
- */
pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
- pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
/* Force-power down DSP, GFX powerdomains */
pwrdm = clkdm_get_pwrdm(dsp_clkdm);
pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
- clkdm_sleep(dsp_clkdm);
pwrdm = clkdm_get_pwrdm(gfx_clkdm);
pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
- clkdm_sleep(gfx_clkdm);
/* Enable hardware-supervised idle for all clkdms */
clkdm_for_each(omap_pm_clkdms_setup, NULL);
Don't attempt to put clockdomains to sleep; this should be handled by the clock framework. It should be enough to program the next-power-state, and then let the code in omap_pm_clkdms_setup() deal with the rest. Start out by programming the MPU and CORE powerdomains to stay ON. Then control the MPU and CORE powerdomain states directly in omap2_enter_full_retention() and omap2_enter_mpu_retention(). Not the most optimal way to do it, but certainly is the most conservative until OMAP2xxx PM is working again. Get rid of the open-coded PM_PWSTCTRL_MPU writes in omap2_enter_mpu_retention(); use the powerdomain code instead. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> --- arch/arm/mach-omap2/pm24xx.c | 30 ++++++++++-------------------- 1 file changed, 10 insertions(+), 20 deletions(-)