@@ -25,6 +25,13 @@
reg = <0>;
clock-frequency = <1300000000>;
};
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ clock-frequency = <1300000000>;
+ };
};
gic: interrupt-controller@f1001000 {
@@ -37,6 +37,7 @@ smp-y := platsmp.o headsmp.o
smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o platsmp-scu.o
smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o platsmp-scu.o
smp-$(CONFIG_ARCH_R8A7790) += smp-r8a7790.o platsmp-apmu.o
+smp-$(CONFIG_ARCH_R8A7791) += smp-r8a7791.o platsmp-apmu.o
smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o
# IRQ objects
@@ -38,6 +38,7 @@ static const char * const koelsch_boards
};
DT_MACHINE_START(KOELSCH_DT, "koelsch")
+ .smp = smp_ops(r8a7791_smp_ops),
.init_early = r8a7791_init_early,
.init_time = rcar_gen2_timer_init,
.init_machine = koelsch_add_standard_devices,
@@ -7,5 +7,6 @@ void r8a7791_add_standard_devices(void);
void r8a7791_add_dt_devices(void);
void r8a7791_clock_init(void);
void r8a7791_init_early(void);
+extern struct smp_operations r8a7791_smp_ops;
#endif /* __ASM_R8A7791_H__ */
@@ -175,6 +175,7 @@ static const char *r8a7791_boards_compat
};
DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
+ .smp = smp_ops(r8a7791_smp_ops),
.init_early = r8a7791_init_early,
.init_time = rcar_gen2_timer_init,
.dt_compat = r8a7791_boards_compat_dt,
@@ -0,0 +1,62 @@
+/*
+ * SMP support for r8a7791
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
+#include <mach/r8a7791.h>
+
+#define RST 0xe6160000
+#define CA15BAR 0x0020
+#define CA15RESCNT 0x0040
+#define RAM 0xe6300000
+
+static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus)
+{
+ void __iomem *p;
+ u32 bar;
+
+ /* let APMU code install data related to shmobile_boot_vector */
+ shmobile_smp_apmu_prepare_cpus(max_cpus);
+
+ /* RAM for jump stub, because BAR requires 256KB aligned address */
+ p = ioremap_nocache(RAM, shmobile_boot_size);
+ memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+ iounmap(p);
+
+ /* setup reset vectors */
+ p = ioremap_nocache(RST, 0x63);
+ bar = (RAM >> 8) & 0xfffffc00;
+ writel_relaxed(bar, p + CA15BAR);
+ writel_relaxed(bar | 0x10, p + CA15BAR);
+
+ /* enable clocks to all CPUs */
+ writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
+ p + CA15RESCNT);
+ iounmap(p);
+}
+
+struct smp_operations r8a7791_smp_ops __initdata = {
+ .smp_prepare_cpus = r8a7791_smp_prepare_cpus,
+ .smp_boot_secondary = shmobile_smp_apmu_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_disable = shmobile_smp_cpu_disable,
+ .cpu_die = shmobile_smp_apmu_cpu_die,
+ .cpu_kill = shmobile_smp_apmu_cpu_kill,
+#endif
+};