| Message ID | 20131008194232.7d74b9e6@armhf (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 10/08/2013 07:42 PM, Jean-Francois Moine wrote: > This patch activates the audio device of the Cubox. > > The audio flow (pin mpp_audio1) is output on both I2S and S/PDIF. > > The third si5351 clock (#2, pin mpp13) is used as the external clock. > > Signed-off-by: Jean-Francois Moine <moinejf@free.fr> > --- > arch/arm/boot/dts/dove-cubox.dts | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts > index 022646e..bb38a24 100644 > --- a/arch/arm/boot/dts/dove-cubox.dts > +++ b/arch/arm/boot/dts/dove-cubox.dts > @@ -132,3 +132,23 @@ > reg = <0>; > }; > }; > + > +&pinctrl { > + pmx_gpio_13_audio1: pmx-gpio-13-audio1 { Jean-Francois, please name the node "pmx_audio1_extclk: pmx-audio1-extclk" and move both to the corresponding section in dove.dtsi. We can reuse them on other Dove boards for sure. > + marvell,pins = "mpp13"; > + marvell,function = "audio1"; > + }; > + > + pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo { > + marvell,pins = "mpp_audio1"; > + marvell,function = "i2s1/spdifo"; > + }; > +}; > + > +&audio1 { > + status = "okay"; > + clocks = <&gate_clk 13>, <&si5351 2>; > + clock-names = "internal", "extclk"; > + pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_gpio_13_audio1>; The above needs updated phandles then. Otherwise, Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> > + pinctrl-names = "default"; > +}; >
On Tue, Oct 08, 2013 at 08:03:10PM +0200, Sebastian Hesselbarth wrote: > On 10/08/2013 07:42 PM, Jean-Francois Moine wrote: > >This patch activates the audio device of the Cubox. > > > >The audio flow (pin mpp_audio1) is output on both I2S and S/PDIF. > > > >The third si5351 clock (#2, pin mpp13) is used as the external clock. > > > >Signed-off-by: Jean-Francois Moine <moinejf@free.fr> > >--- > > arch/arm/boot/dts/dove-cubox.dts | 20 ++++++++++++++++++++ > > 1 file changed, 20 insertions(+) > > > >diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts > >index 022646e..bb38a24 100644 > >--- a/arch/arm/boot/dts/dove-cubox.dts > >+++ b/arch/arm/boot/dts/dove-cubox.dts > >@@ -132,3 +132,23 @@ > > reg = <0>; > > }; > > }; > >+ > >+&pinctrl { > >+ pmx_gpio_13_audio1: pmx-gpio-13-audio1 { > > Jean-Francois, > > please name the node "pmx_audio1_extclk: pmx-audio1-extclk" > and move both to the corresponding section in dove.dtsi. > We can reuse them on other Dove boards for sure. > > >+ marvell,pins = "mpp13"; > >+ marvell,function = "audio1"; > >+ }; > >+ > >+ pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo { > >+ marvell,pins = "mpp_audio1"; > >+ marvell,function = "i2s1/spdifo"; > >+ }; > >+}; > >+ > >+&audio1 { > >+ status = "okay"; > >+ clocks = <&gate_clk 13>, <&si5351 2>; > >+ clock-names = "internal", "extclk"; > >+ pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_gpio_13_audio1>; > > The above needs updated phandles then. > > Otherwise, > > Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Once you make the above changes, just send a v3 in-reply-to this patch and I'll pick it up with the other two. thx, Jason. > > >+ pinctrl-names = "default"; > >+}; > > > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 022646e..bb38a24 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -132,3 +132,23 @@ reg = <0>; }; }; + +&pinctrl { + pmx_gpio_13_audio1: pmx-gpio-13-audio1 { + marvell,pins = "mpp13"; + marvell,function = "audio1"; + }; + + pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo { + marvell,pins = "mpp_audio1"; + marvell,function = "i2s1/spdifo"; + }; +}; + +&audio1 { + status = "okay"; + clocks = <&gate_clk 13>, <&si5351 2>; + clock-names = "internal", "extclk"; + pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_gpio_13_audio1>; + pinctrl-names = "default"; +};
This patch activates the audio device of the Cubox. The audio flow (pin mpp_audio1) is output on both I2S and S/PDIF. The third si5351 clock (#2, pin mpp13) is used as the external clock. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> --- arch/arm/boot/dts/dove-cubox.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)