===================================================================
@@ -55,7 +55,6 @@
#include "NCR5380.h"
#define RESET_BOOT
-#define DRIVER_SETUP
extern void via_scsi_clear(void);
@@ -113,7 +112,6 @@ static __inline__ void macscsi_write(str
*/
static int __init mac_scsi_setup(char *str) {
-#ifdef DRIVER_SETUP
int ints[7];
(void)get_options( str, ARRAY_SIZE(ints), ints);
@@ -166,7 +164,6 @@ static int __init mac_scsi_setup(char *s
}
#endif /* SUPPORT_TAGS */
-#endif /* DRIVER_SETUP */
return 1;
}
===================================================================
@@ -43,10 +43,6 @@
* Options :
*
* PARITY - enable parity checking. Not supported.
- *
- * SCSI2 - enable support for SCSI-II tagged queueing. Untested.
- *
- * USLEEP - enable support for devices that don't disconnect. Untested.
*/
#define AUTOSENSE
@@ -79,18 +75,7 @@
extern int sun3_map_test(unsigned long, char *);
-#define USE_WRAPPER
/*#define RESET_BOOT */
-#define DRIVER_SETUP
-
-/*
- * BUG can be used to trigger a strange code-size related hang on 2.1 kernels
- */
-#ifdef BUG
-#undef RESET_BOOT
-#undef DRIVER_SETUP
-#endif
-
/* #define SUPPORT_TAGS */
#ifdef SUN3_SCSI_VME
===================================================================
@@ -649,7 +649,7 @@ NCR5380_print_options(struct Scsi_Host *
" UNSAFE "
#endif
);
- printk(" USLEEP, USLEEP_POLL=%d USLEEP_SLEEP=%d", USLEEP_POLL, USLEEP_SLEEP);
+ printk(" USLEEP_POLL=%d USLEEP_SLEEP=%d", USLEEP_POLL, USLEEP_SLEEP);
printk(" generic release=%d", NCR5380_PUBLIC_RELEASE);
if (((struct NCR5380_hostdata *) instance->hostdata)->flags & FLAG_NCR53C400) {
printk(" ncr53c400 release=%d", NCR53C400_PUBLIC_RELEASE);
===================================================================
@@ -1,6 +1,5 @@
#define AUTOSENSE
#define PSEUDO_DMA
-#define FOO
#define UNSAFE /* Not unsafe for PAS16 -- use it */
#define PDEBUG 0
@@ -52,8 +51,6 @@
* increase compared to polled I/O.
*
* PARITY - enable parity checking. Not supported.
- *
- * SCSI2 - enable support for SCSI-II tagged queueing. Untested.
*
* UNSAFE - leave interrupts enabled during pseudo-DMA transfers. This
* parameter comes from the NCR5380 code. It is NOT unsafe with
@@ -63,8 +60,6 @@
* want to use UNSAFE you can try defining LIMIT_TRANSFERSIZE or
* twiddle with the transfer size in the high level code.
*
- * USLEEP - enable support for devices that don't disconnect. Untested.
- *
* The card is detected and initialized in one of several ways :
* 1. Autoprobe (default) - There are many different models of
* the Pro Audio Spectrum/Studio 16, and I only have one of
===================================================================
@@ -44,10 +44,6 @@
*
* PARITY - enable parity checking. Not supported.
*
- * SCSI2 - enable support for SCSI-II tagged queueing. Untested.
- *
- * USLEEP - enable support for devices that don't disconnect. Untested.
- *
* The card is detected and initialized in one of several ways :
* 1. With command line overrides - NCR5380=port,irq may be
* used on the LILO command line to override the defaults.
@@ -79,7 +75,6 @@
*/
/* settings for DTC3181E card with only Mustek scanner attached */
-#define USLEEP
#define USLEEP_POLL 1
#define USLEEP_SLEEP 20
#define USLEEP_WAITLONG 500
===================================================================
@@ -29,7 +29,6 @@
#define NCR5380_read(reg) readb(_base + ((reg) << 2))
#define NCR5380_write(reg, value) writeb(value, _base + ((reg) << 2))
-#define NCR5380_intr oakscsi_intr
#define NCR5380_queue_command oakscsi_queue_command
#define NCR5380_show_info oakscsi_show_info
#define NCR5380_write_info oakscsi_write_info
===================================================================
@@ -118,7 +118,6 @@ static const char* generic_NCR5380_info(
#define NCR5380_bus_reset generic_NCR5380_bus_reset
#define NCR5380_pread generic_NCR5380_pread
#define NCR5380_pwrite generic_NCR5380_pwrite
-#define NCR5380_proc_info notyet_generic_proc_info
#define BOARD_NCR5380 0
#define BOARD_NCR53C400 1
===================================================================
@@ -47,17 +47,12 @@
* increase compared to polled I/O.
*
* PARITY - enable parity checking. Not supported.
- *
- * SCSI2 - enable support for SCSI-II tagged queueing. Untested.
- *
*
* UNSAFE - leave interrupts enabled during pseudo-DMA transfers. You
* only really want to use this if you're having a problem with
* dropped characters during high speed communications, and even
* then, you're going to be better off twiddling with transfersize.
*
- * USLEEP - enable support for devices that don't disconnect. Untested.
- *
* The card is detected and initialized in one of several ways :
* 1. Autoprobe (default) - since the board is memory mapped,
* a BIOS signature is scanned for to locate the registers.
===================================================================
@@ -89,7 +89,6 @@ static int sun3scsi_release (struct Scsi
#define NCR5380_read(reg) sun3scsi_read(reg)
#define NCR5380_write(reg, value) sun3scsi_write(reg, value)
-#define NCR5380_intr sun3scsi_intr
#define NCR5380_queue_command sun3scsi_queue_command
#define NCR5380_bus_reset sun3scsi_bus_reset
#define NCR5380_abort sun3scsi_abort
===================================================================
@@ -44,7 +44,6 @@
#define NCR5380_read(reg) atari_scsi_reg_read( reg )
#define NCR5380_write(reg, value) atari_scsi_reg_write( reg, value )
-#define NCR5380_intr atari_scsi_intr
#define NCR5380_queue_command atari_scsi_queue_command
#define NCR5380_abort atari_scsi_abort
#define NCR5380_show_info atari_scsi_show_info
Some macros are never evaluated (i.e. FOO, USLEEP, SCSI2 and USE_WRAPPER; and in some drivers, NCR5380_intr and NCR5380_proc_info). DRIVER_SETUP serves no purpose anymore. Remove these macro definitions. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> --- drivers/scsi/NCR5380.c | 2 +- drivers/scsi/arm/oak.c | 1 - drivers/scsi/atari_scsi.h | 1 - drivers/scsi/g_NCR5380.c | 5 ----- drivers/scsi/g_NCR5380.h | 1 - drivers/scsi/mac_scsi.c | 3 --- drivers/scsi/pas16.c | 5 ----- drivers/scsi/sun3_scsi.c | 15 --------------- drivers/scsi/sun3_scsi.h | 1 - drivers/scsi/t128.c | 5 ----- 10 files changed, 1 insertion(+), 38 deletions(-)