===================================================================
@@ -29,6 +29,7 @@
#define NCR5380_write(reg, value) cumanascsi_write(_instance, reg, value)
#define NCR5380_intr cumanascsi_intr
#define NCR5380_queue_command cumanascsi_queue_command
+#define NCR5380_info cumanascsi_info
#define NCR5380_implementation_fields \
unsigned ctrl; \
@@ -41,11 +42,6 @@ void cumanascsi_setup(char *str, int *in
{
}
-const char *cumanascsi_info(struct Scsi_Host *spnt)
-{
- return "";
-}
-
#define CTRL 0x16fc
#define STAT 0x2004
#define L(v) (((v)<<16)|((v) & 0x0000ffff))
@@ -266,14 +262,6 @@ static int cumanascsi1_probe(struct expa
goto out_unmap;
}
- printk("scsi%d: at port 0x%08lx irq %d",
- host->host_no, host->io_port, host->irq);
- printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
- host->can_queue, host->cmd_per_lun, CUMANASCSI_PUBLIC_RELEASE);
- printk("\nscsi%d:", host->host_no);
- NCR5380_print_options(host);
- printk("\n");
-
ret = scsi_add_host(host, &ec->dev);
if (ret)
goto out_free_irq;
===================================================================
@@ -29,6 +29,7 @@
#define NCR5380_read(reg) readb(_base + ((reg) << 2))
#define NCR5380_write(reg, value) writeb(value, _base + ((reg) << 2))
#define NCR5380_queue_command oakscsi_queue_command
+#define NCR5380_info oakscsi_info
#define NCR5380_show_info oakscsi_show_info
#define NCR5380_write_info oakscsi_write_info
@@ -40,11 +41,6 @@
#undef START_DMA_INITIATOR_RECEIVE_REG
#define START_DMA_INITIATOR_RECEIVE_REG (128 + 7)
-const char * oakscsi_info (struct Scsi_Host *spnt)
-{
- return "";
-}
-
#define STAT ((128 + 16) << 2)
#define DATA ((128 + 8) << 2)
@@ -153,14 +149,6 @@ static int oakscsi_probe(struct expansio
NCR5380_init(host, 0);
- printk("scsi%d: at port 0x%08lx irqs disabled",
- host->host_no, host->io_port);
- printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
- host->can_queue, host->cmd_per_lun, OAKSCSI_PUBLIC_RELEASE);
- printk("\nscsi%d:", host->host_no);
- NCR5380_print_options(host);
- printk("\n");
-
ret = scsi_add_host(host, &ec->dev);
if (ret)
goto out_unmap;
===================================================================
@@ -699,21 +699,6 @@ static int __init atari_scsi_detect(stru
#endif
}
- printk(KERN_INFO "scsi%d: options CAN_QUEUE=%d CMD_PER_LUN=%d SCAT-GAT=%d "
-#ifdef SUPPORT_TAGS
- "TAGGED-QUEUING=%s "
-#endif
- "HOSTID=%d",
- instance->host_no, instance->hostt->can_queue,
- instance->hostt->cmd_per_lun,
- instance->hostt->sg_tablesize,
-#ifdef SUPPORT_TAGS
- setup_use_tagged_queuing ? "yes" : "no",
-#endif
- instance->hostt->this_id );
- NCR5380_print_options(instance);
- printk("\n");
-
called = 1;
return 1;
}
@@ -815,15 +800,6 @@ static void __init atari_scsi_reset_boot
}
#endif
-
-static const char *atari_scsi_info(struct Scsi_Host *host)
-{
- /* atari_scsi_detect() is verbose enough... */
- static const char string[] = "Atari native SCSI";
- return string;
-}
-
-
#if defined(REAL_DMA)
static unsigned long atari_scsi_dma_setup(struct Scsi_Host *instance,
===================================================================
@@ -236,16 +236,6 @@ int __init macscsi_detect(struct scsi_ho
instance->irq = IRQ_NONE;
}
- printk(KERN_INFO "scsi%d: generic 5380 at port %lX irq", instance->host_no, instance->io_port);
- if (instance->irq == IRQ_NONE)
- printk (KERN_INFO "s disabled");
- else
- printk (KERN_INFO " %d", instance->irq);
- printk(KERN_INFO " options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
- instance->can_queue, instance->cmd_per_lun, MACSCSI_PUBLIC_RELEASE);
- printk(KERN_INFO "\nscsi%d:", instance->host_no);
- NCR5380_print_options(instance);
- printk("\n");
called = 1;
return 1;
}
@@ -297,10 +287,6 @@ static void mac_scsi_reset_boot(struct S
}
#endif
-const char * macscsi_info (struct Scsi_Host *spnt) {
- return "";
-}
-
/*
Pseudo-DMA: (Ove Edlund)
The code attempts to catch bus errors that occur if one for example
===================================================================
@@ -286,19 +286,6 @@ static int __init sun3scsi_detect(struct
#endif
}
- pr_info("scsi%d: %s at port %lX irq", instance->host_no,
- tpnt->proc_name, instance->io_port);
- if (instance->irq == IRQ_NONE)
- printk ("s disabled");
- else
- printk (" %d", instance->irq);
- printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
- instance->can_queue, instance->cmd_per_lun,
- SUN3SCSI_PUBLIC_RELEASE);
- printk("\nscsi%d:", instance->host_no);
- NCR5380_print_options(instance);
- printk("\n");
-
dregs->csr = 0;
udelay(SUN3_DMA_DELAY);
dregs->csr = CSR_SCSI | CSR_FIFO | CSR_INTR;
@@ -380,11 +367,6 @@ static void sun3_scsi_reset_boot(struct
}
#endif
-static const char *sun3scsi_info(struct Scsi_Host *spnt)
-{
- return "";
-}
-
// safe bits for the CSR
#define CSR_GOOD 0x060f
===================================================================
@@ -610,47 +610,71 @@ static int __init __maybe_unused NCR5380
}
/**
- * NCR58380_print_options - show options
- * @instance: unused for now
+ * NCR58380_info - report driver and host information
+ * @instance: relevant scsi host instance
*
- * Called by probe code indicating the NCR5380 driver options that
- * were selected. At some point this will switch to runtime options
- * read from the adapter in question
+ * For use as the host template info() handler.
*
* Locks: none
*/
-static void __init __maybe_unused
-NCR5380_print_options(struct Scsi_Host *instance)
+static const char *NCR5380_info(struct Scsi_Host *instance)
{
- printk(" generic options"
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ return hostdata->info;
+}
+
+static void prepare_info(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ snprintf(hostdata->info, sizeof(hostdata->info),
+ "%s, io_port 0x%lx, n_io_port %d, "
+ "base 0x%lx, irq %d, "
+ "can_queue %d, cmd_per_lun %d, "
+ "sg_tablesize %d, this_id %d, "
+ "flags { %s%s%s}, "
+#if defined(USLEEP_POLL) && defined(USLEEP_WAITLONG)
+ "USLEEP_POLL %d, USLEEP_WAITLONG %d, "
+#endif
+ "options { %s} ",
+ instance->hostt->name, instance->io_port, instance->n_io_port,
+ instance->base, instance->irq,
+ instance->can_queue, instance->cmd_per_lun,
+ instance->sg_tablesize, instance->this_id,
+ hostdata->flags & FLAG_NCR53C400 ? "NCR53C400 " : "",
+ hostdata->flags & FLAG_DTC3181E ? "DTC3181E " : "",
+ hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "",
+#if defined(USLEEP_POLL) && defined(USLEEP_WAITLONG)
+ USLEEP_POLL, USLEEP_WAITLONG,
+#endif
#ifdef AUTOPROBE_IRQ
- " AUTOPROBE_IRQ"
+ "AUTOPROBE_IRQ "
#endif
#ifdef DIFFERENTIAL
- " DIFFERENTIAL"
+ "DIFFERENTIAL "
#endif
#ifdef REAL_DMA
- " REAL DMA"
+ "REAL_DMA "
#endif
#ifdef REAL_DMA_POLL
- " REAL DMA POLL"
+ "REAL_DMA_POLL "
#endif
#ifdef PARITY
- " PARITY"
+ "PARITY "
#endif
#ifdef PSEUDO_DMA
- " PSEUDO DMA"
+ "PSEUDO_DMA "
#endif
#ifdef UNSAFE
- " UNSAFE "
+ "UNSAFE "
#endif
- );
- printk(" USLEEP_POLL=%d USLEEP_SLEEP=%d", USLEEP_POLL, USLEEP_SLEEP);
- printk(" generic release=%d", NCR5380_PUBLIC_RELEASE);
- if (((struct NCR5380_hostdata *) instance->hostdata)->flags & FLAG_NCR53C400) {
- printk(" ncr53c400 release=%d", NCR53C400_PUBLIC_RELEASE);
- }
+#ifdef NCR53C400
+ "NCR53C400 "
+#endif
+ "");
+ hostdata->info[sizeof(hostdata->info) - 1] = '\0';
}
/**
@@ -728,13 +752,6 @@ static int __maybe_unused NCR5380_show_i
SPRINTF("PAS16 release=%d", PAS16_PUBLIC_RELEASE);
#endif
- SPRINTF("\nBase Addr: 0x%05lX ", (long) instance->base);
- SPRINTF("io_port: %04x ", (int) instance->io_port);
- if (instance->irq == IRQ_NONE)
- SPRINTF("IRQ: None.\n");
- else
- SPRINTF("IRQ: %d.\n", instance->irq);
-
#ifdef DTC_PUBLIC_RELEASE
SPRINTF("Highwater I/O busy_spin_counts -- write: %d read: %d\n", dtc_wmaxi, dtc_maxi);
#endif
@@ -842,6 +859,8 @@ static int NCR5380_init(struct Scsi_Host
hostdata->host = instance;
hostdata->time_expires = 0;
+ prepare_info(instance);
+
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(TARGET_COMMAND_REG, 0);
===================================================================
@@ -269,6 +269,7 @@ struct NCR5380_hostdata {
volatile Scsi_Cmnd *selecting;
struct delayed_work coroutine; /* our co-routine */
struct scsi_eh_save ses;
+ char info[256];
};
#ifdef __KERNEL__
@@ -303,7 +304,7 @@ static void NCR5380_information_transfer
static irqreturn_t NCR5380_intr(int irq, void *dev_id);
#endif
static void NCR5380_main(struct work_struct *work);
-static void __maybe_unused NCR5380_print_options(struct Scsi_Host *instance);
+static const char *NCR5380_info(struct Scsi_Host *instance);
static void NCR5380_reselect(struct Scsi_Host *instance);
static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd *cmd);
#if defined(PSEUDO_DMA) || defined(REAL_DMA) || defined(REAL_DMA_POLL)
===================================================================
@@ -281,15 +281,6 @@ found:
printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
#endif
- printk(KERN_INFO "scsi%d : at 0x%05X", instance->host_no, (int) instance->base);
- if (instance->irq == IRQ_NONE)
- printk(" interrupts disabled");
- else
- printk(" irq %d", instance->irq);
- printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", CAN_QUEUE, CMD_PER_LUN, DTC_PUBLIC_RELEASE);
- NCR5380_print_options(instance);
- printk("\n");
-
++current_override;
++count;
}
@@ -461,6 +452,7 @@ static struct scsi_host_template driver_
.proc_name = "dtc3x80",
.show_info = dtc_show_info,
.write_info = dtc_write_info,
+ .info = dtc_info,
.queuecommand = dtc_queue_command,
.eh_abort_handler = dtc_abort,
.eh_bus_reset_handler = dtc_bus_reset,
===================================================================
@@ -446,15 +446,6 @@ static int __init generic_NCR5380_detect
printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}
- printk(KERN_INFO "scsi%d : at " STRVAL(NCR5380_map_name) " 0x%x", instance->host_no, (unsigned int) instance->NCR5380_instance_name);
- if (instance->irq == IRQ_NONE)
- printk(" interrupts disabled");
- else
- printk(" irq %d", instance->irq);
- printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", CAN_QUEUE, CMD_PER_LUN, GENERIC_NCR5380_PUBLIC_RELEASE);
- NCR5380_print_options(instance);
- printk("\n");
-
++current_override;
++count;
}
@@ -462,19 +453,6 @@ static int __init generic_NCR5380_detect
}
/**
- * generic_NCR5380_info - reporting string
- * @host: NCR5380 to report on
- *
- * Report driver information for the NCR5380
- */
-
-static const char *generic_NCR5380_info(struct Scsi_Host *host)
-{
- static const char string[] = "Generic NCR5380/53C400 Driver";
- return string;
-}
-
-/**
* generic_NCR5380_release_resources - free resources
* @instance: host adapter to clean up
*
@@ -720,120 +698,9 @@ static inline int NCR5380_pwrite(struct
#include "NCR5380.c"
-#define PRINTP(x) seq_printf(m, x)
-#define ANDP ,
-
-static void sprint_opcode(struct seq_file *m, int opcode)
-{
- PRINTP("0x%02x " ANDP opcode);
-}
-
-static void sprint_command(struct seq_file *m, unsigned char *command)
-{
- int i, s;
- sprint_opcode(m, command[0]);
- for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
- PRINTP("%02x " ANDP command[i]);
- PRINTP("\n");
-}
-
-/**
- * sprintf_Scsi_Cmnd - print a scsi command
- * @m: seq_fil to print into
- * @cmd: SCSI command block
- *
- * Print out the target and command data in hex
- */
-
-static void sprint_Scsi_Cmnd(struct seq_file *m, Scsi_Cmnd * cmd)
-{
- PRINTP("host number %d destination target %d, lun %d\n" ANDP cmd->device->host->host_no ANDP cmd->device->id ANDP cmd->device->lun);
- PRINTP(" command = ");
- sprint_command(m, cmd->cmnd);
-}
-
-/**
- * generic_NCR5380_proc_info - /proc for NCR5380 driver
- * @buffer: buffer to print into
- * @start: start position
- * @offset: offset into buffer
- * @len: length
- * @hostno: instance to affect
- * @inout: read/write
- *
- * Provide the procfs information for the 5380 controller. We fill
- * this with useful debugging information including the commands
- * being executed, disconnected command queue and the statistical
- * data
- *
- * Locks: global cli/lock for queue walk
- */
-
-static int generic_NCR5380_show_info(struct seq_file *m, struct Scsi_Host *scsi_ptr)
-{
- NCR5380_local_declare();
- unsigned long flags;
- unsigned char status;
- int i;
- Scsi_Cmnd *ptr;
- struct NCR5380_hostdata *hostdata;
-
- NCR5380_setup(scsi_ptr);
- hostdata = (struct NCR5380_hostdata *) scsi_ptr->hostdata;
-
- spin_lock_irqsave(scsi_ptr->host_lock, flags);
- PRINTP("SCSI host number %d : %s\n" ANDP scsi_ptr->host_no ANDP scsi_ptr->hostt->name);
- PRINTP("Generic NCR5380 driver version %d\n" ANDP GENERIC_NCR5380_PUBLIC_RELEASE);
- PRINTP("NCR5380 core version %d\n" ANDP NCR5380_PUBLIC_RELEASE);
-#ifdef NCR53C400
- PRINTP("NCR53C400 extension version %d\n" ANDP NCR53C400_PUBLIC_RELEASE);
- PRINTP("NCR53C400 card%s detected\n" ANDP(((struct NCR5380_hostdata *) scsi_ptr->hostdata)->flags & FLAG_NCR53C400) ? "" : " not");
-# if NCR53C400_PSEUDO_DMA
- PRINTP("NCR53C400 pseudo DMA used\n");
-# endif
-#else
- PRINTP("NO NCR53C400 driver extensions\n");
-#endif
- PRINTP("Using %s mapping at %s 0x%lx, " ANDP STRVAL(NCR5380_map_config) ANDP STRVAL(NCR5380_map_name) ANDP scsi_ptr->NCR5380_instance_name);
- if (scsi_ptr->irq == IRQ_NONE)
- PRINTP("no interrupt\n");
- else
- PRINTP("on interrupt %d\n" ANDP scsi_ptr->irq);
-
- status = NCR5380_read(STATUS_REG);
- if (!(status & SR_REQ))
- PRINTP("REQ not asserted, phase unknown.\n");
- else {
- for (i = 0; (phases[i].value != PHASE_UNKNOWN) && (phases[i].value != (status & PHASE_MASK)); ++i);
- PRINTP("Phase %s\n" ANDP phases[i].name);
- }
-
- if (!hostdata->connected) {
- PRINTP("No currently connected command\n");
- } else {
- sprint_Scsi_Cmnd(m, (Scsi_Cmnd *) hostdata->connected);
- }
-
- PRINTP("issue_queue\n");
-
- for (ptr = (Scsi_Cmnd *) hostdata->issue_queue; ptr; ptr = (Scsi_Cmnd *) ptr->host_scribble)
- sprint_Scsi_Cmnd(m, ptr);
-
- PRINTP("disconnected_queue\n");
-
- for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr; ptr = (Scsi_Cmnd *) ptr->host_scribble)
- sprint_Scsi_Cmnd(m, ptr);
-
- spin_unlock_irqrestore(scsi_ptr->host_lock, flags);
- return 0;
-}
-
-#undef PRINTP
-#undef ANDP
-
static struct scsi_host_template driver_template = {
.show_info = generic_NCR5380_show_info,
- .name = "Generic NCR5380/NCR53C400 Scsi Driver",
+ .name = "Generic NCR5380/NCR53C400 SCSI",
.detect = generic_NCR5380_detect,
.release = generic_NCR5380_release_resources,
.info = generic_NCR5380_info,
===================================================================
@@ -438,17 +438,6 @@ static int __init pas16_detect(struct sc
printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
#endif
- printk("scsi%d : at 0x%04x", instance->host_no, (int)
- instance->io_port);
- if (instance->irq == IRQ_NONE)
- printk (" interrupts disabled");
- else
- printk (" irq %d", instance->irq);
- printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
- CAN_QUEUE, CMD_PER_LUN, PAS16_PUBLIC_RELEASE);
- NCR5380_print_options(instance);
- printk("\n");
-
++current_override;
++count;
}
@@ -588,6 +577,7 @@ static struct scsi_host_template driver_
.proc_name = "pas16",
.show_info = pas16_show_info,
.write_info = pas16_write_info,
+ .info = pas16_info,
.queuecommand = pas16_queue_command,
.eh_abort_handler = pas16_abort,
.eh_bus_reset_handler = pas16_bus_reset,
===================================================================
@@ -249,16 +249,6 @@ found:
printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
#endif
- printk("scsi%d : at 0x%08lx", instance->host_no, instance->base);
- if (instance->irq == IRQ_NONE)
- printk (" interrupts disabled");
- else
- printk (" irq %d", instance->irq);
- printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
- CAN_QUEUE, CMD_PER_LUN, T128_PUBLIC_RELEASE);
- NCR5380_print_options(instance);
- printk("\n");
-
++current_override;
++count;
}
@@ -411,6 +401,7 @@ static struct scsi_host_template driver_
.proc_name = "t128",
.show_info = t128_show_info,
.write_info = t128_write_info,
+ .info = t128_info,
.queuecommand = t128_queue_command,
.eh_abort_handler = t128_abort,
.eh_bus_reset_handler = t128_bus_reset,
===================================================================
@@ -57,6 +57,7 @@
static struct scsi_host_template dmx3191d_driver_template = {
.proc_name = DMX3191D_DRIVER_NAME,
.name = "Domex DMX3191D",
+ .info = NCR5380_info,
.queuecommand = NCR5380_queue_command,
.eh_abort_handler = NCR5380_abort,
.eh_bus_reset_handler = NCR5380_bus_reset,
===================================================================
@@ -100,6 +100,8 @@
#define NCR5380_bus_reset generic_NCR5380_bus_reset
#define NCR5380_pread generic_NCR5380_pread
#define NCR5380_pwrite generic_NCR5380_pwrite
+#define NCR5380_info generic_NCR5380_info
+#define NCR5380_show_info generic_NCR5380_show_info
#define BOARD_NCR5380 0
#define BOARD_NCR53C400 1
===================================================================
@@ -65,6 +65,7 @@
#define NCR5380_queue_command dtc_queue_command
#define NCR5380_abort dtc_abort
#define NCR5380_bus_reset dtc_bus_reset
+#define NCR5380_info dtc_info
#define NCR5380_show_info dtc_show_info
#define NCR5380_write_info dtc_write_info
===================================================================
@@ -143,6 +143,7 @@
#define NCR5380_queue_command pas16_queue_command
#define NCR5380_abort pas16_abort
#define NCR5380_bus_reset pas16_bus_reset
+#define NCR5380_info pas16_info
#define NCR5380_show_info pas16_show_info
#define NCR5380_write_info pas16_write_info
===================================================================
@@ -116,6 +116,7 @@
#define NCR5380_queue_command t128_queue_command
#define NCR5380_abort t128_abort
#define NCR5380_bus_reset t128_bus_reset
+#define NCR5380_info t128_info
#define NCR5380_show_info t128_show_info
#define NCR5380_write_info t128_write_info
===================================================================
@@ -53,6 +53,7 @@
#define NCR5380_queue_command macscsi_queue_command
#define NCR5380_abort macscsi_abort
#define NCR5380_bus_reset macscsi_bus_reset
+#define NCR5380_info macscsi_info
#define NCR5380_show_info macscsi_show_info
#define NCR5380_write_info macscsi_write_info
===================================================================
@@ -144,12 +144,6 @@
* be able to coexist with appropriate changes to the high level
* SCSI code.
*
- * A NCR5380_PUBLIC_REVISION macro is provided, with the release
- * number (updated for each public release) printed by the
- * NCR5380_print_options command, which should be called from the
- * wrapper detect function, so that I know what release of the driver
- * users are using.
- *
* Issues specific to the NCR5380 :
*
* When used in a PIO or pseudo-dma mode, the NCR5380 is a braindead
@@ -247,7 +241,6 @@
* NCR5380_queue_command
* NCR5380_reset
* NCR5380_abort
- * NCR5380_proc_info
*
* to be the global entry points into the specific driver, ie
* #define NCR5380_queue_command t128_queue_command.
@@ -259,8 +252,7 @@
* The generic driver is initialized by calling NCR5380_init(instance),
* after setting the appropriate host specific fields and ID. If the
* driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance,
- * possible) function may be used. Before the specific driver initialization
- * code finishes, NCR5380_print_options should be called.
+ * possible) function may be used.
*/
static struct Scsi_Host *first_instance = NULL;
@@ -667,30 +659,50 @@ static inline void NCR5380_all_init(void
}
}
-
-/*
- * Function : void NCR58380_print_options (struct Scsi_Host *instance)
+/**
+ * NCR58380_info - report driver and host information
+ * @instance: relevant scsi host instance
*
- * Purpose : called by probe code indicating the NCR5380 driver
- * options that were selected.
+ * For use as the host template info() handler.
*
- * Inputs : instance, pointer to this instance. Unused.
+ * Locks: none
*/
-static void __init NCR5380_print_options(struct Scsi_Host *instance)
+static const char *NCR5380_info(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ return hostdata->info;
+}
+
+static void prepare_info(struct Scsi_Host *instance)
{
- printk(" generic options"
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ snprintf(hostdata->info, sizeof(hostdata->info),
+ "%s, io_port 0x%lx, n_io_port %d, "
+ "base 0x%lx, irq %d, "
+ "can_queue %d, cmd_per_lun %d, "
+ "sg_tablesize %d, this_id %d, "
+ "options { %s} ",
+ instance->hostt->name, instance->io_port, instance->n_io_port,
+ instance->base, instance->irq,
+ instance->can_queue, instance->cmd_per_lun,
+ instance->sg_tablesize, instance->this_id,
+#ifdef DIFFERENTIAL
+ "DIFFERENTIAL "
+#endif
#ifdef REAL_DMA
- " REAL DMA"
+ "REAL_DMA "
#endif
#ifdef PARITY
- " PARITY"
+ "PARITY "
#endif
#ifdef SUPPORT_TAGS
- " SCSI-2 TAGGED QUEUING"
+ "SUPPORT_TAGS "
#endif
- );
- printk(" generic release=%d", NCR5380_PUBLIC_RELEASE);
+ "");
+ hostdata->info[sizeof(hostdata->info) - 1] = '\0';
}
/*
@@ -836,6 +848,8 @@ static int __init NCR5380_init(struct Sc
first_instance = instance;
}
+ prepare_info(instance);
+
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(TARGET_COMMAND_REG, 0);
===================================================================
@@ -47,6 +47,7 @@
#define NCR5380_queue_command atari_scsi_queue_command
#define NCR5380_abort atari_scsi_abort
#define NCR5380_show_info atari_scsi_show_info
+#define NCR5380_info atari_scsi_info
#define NCR5380_dma_read_setup(inst,d,c) atari_scsi_dma_setup (inst, d, c, 0)
#define NCR5380_dma_write_setup(inst,d,c) atari_scsi_dma_setup (inst, d, c, 1)
#define NCR5380_dma_residual(inst) atari_scsi_dma_residual( inst )
===================================================================
@@ -131,12 +131,6 @@
* be able to coexist with appropriate changes to the high level
* SCSI code.
*
- * A NCR5380_PUBLIC_REVISION macro is provided, with the release
- * number (updated for each public release) printed by the
- * NCR5380_print_options command, which should be called from the
- * wrapper detect function, so that I know what release of the driver
- * users are using.
- *
* Issues specific to the NCR5380 :
*
* When used in a PIO or pseudo-dma mode, the NCR5380 is a braindead
@@ -234,7 +228,6 @@
* NCR5380_queue_command
* NCR5380_reset
* NCR5380_abort
- * NCR5380_proc_info
*
* to be the global entry points into the specific driver, ie
* #define NCR5380_queue_command t128_queue_command.
@@ -246,8 +239,7 @@
* The generic driver is initialized by calling NCR5380_init(instance),
* after setting the appropriate host specific fields and ID. If the
* driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance,
- * possible) function may be used. Before the specific driver initialization
- * code finishes, NCR5380_print_options should be called.
+ * possible) function may be used.
*/
static struct Scsi_Host *first_instance = NULL;
@@ -613,30 +605,50 @@ static inline void NCR5380_all_init (voi
}
}
-
-/*
- * Function : void NCR58380_print_options (struct Scsi_Host *instance)
+/**
+ * NCR58380_info - report driver and host information
+ * @instance: relevant scsi host instance
*
- * Purpose : called by probe code indicating the NCR5380 driver
- * options that were selected.
+ * For use as the host template info() handler.
*
- * Inputs : instance, pointer to this instance. Unused.
+ * Locks: none
*/
-static void __init NCR5380_print_options (struct Scsi_Host *instance)
+static const char *NCR5380_info(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ return hostdata->info;
+}
+
+static void prepare_info(struct Scsi_Host *instance)
{
- printk(" generic options"
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ snprintf(hostdata->info, sizeof(hostdata->info),
+ "%s, io_port 0x%lx, n_io_port %d, "
+ "base 0x%lx, irq %d, "
+ "can_queue %d, cmd_per_lun %d, "
+ "sg_tablesize %d, this_id %d, "
+ "options { %s} ",
+ instance->hostt->name, instance->io_port, instance->n_io_port,
+ instance->base, instance->irq,
+ instance->can_queue, instance->cmd_per_lun,
+ instance->sg_tablesize, instance->this_id,
+#ifdef DIFFERENTIAL
+ "DIFFERENTIAL "
+#endif
#ifdef REAL_DMA
- " REAL DMA"
+ "REAL_DMA "
#endif
#ifdef PARITY
- " PARITY"
+ "PARITY "
#endif
#ifdef SUPPORT_TAGS
- " SCSI-2 TAGGED QUEUING"
+ "SUPPORT_TAGS "
#endif
- );
- printk(" generic release=%d", NCR5380_PUBLIC_RELEASE);
+ "");
+ hostdata->info[sizeof(hostdata->info) - 1] = '\0';
}
/*
@@ -781,7 +793,9 @@ static int __init NCR5380_init(struct Sc
the_template = instance->hostt;
first_instance = instance;
}
-
+
+ prepare_info(instance);
+
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(TARGET_COMMAND_REG, 0);
===================================================================
@@ -74,6 +74,7 @@
#define NCR5380_bus_reset sun3scsi_bus_reset
#define NCR5380_abort sun3scsi_abort
#define NCR5380_show_info sun3scsi_show_info
+#define NCR5380_info sun3scsi_info
#define NCR5380_dma_xfer_len(i, cmd, phase) \
sun3scsi_dma_xfer_len(cmd->SCp.this_residual,cmd,((phase) & SR_IO) ? 0 : 1)
If the host->info() method is not set, then host->name is used by default. For atari_scsi, that is exactly the same text. So remove the redundant info() method. Keep sun3_scsi.c in line with atari_scsi. Some NCR5380 drivers return an empty string from the info() method (arm/cumana_1.c arm/oak.c mac_scsi.c) while other drivers use the default (dmx3191d dtc.c g_NCR5380.c pas16.c t128.c). Implement a common info() method to replace a lot of duplicated code which the various drivers use to announce the same information. This replaces most of the (deprecated) show_info() output and all of the NCR5380_print_info() output. This also eliminates a bunch of code in g_NCR5380 which just duplicates functionality in the core driver. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> --- drivers/scsi/NCR5380.c | 75 ++++++++++++++--------- drivers/scsi/NCR5380.h | 3 drivers/scsi/arm/cumana_1.c | 14 ---- drivers/scsi/arm/oak.c | 14 ---- drivers/scsi/atari_NCR5380.c | 58 +++++++++++------- drivers/scsi/atari_scsi.c | 24 ------- drivers/scsi/atari_scsi.h | 1 drivers/scsi/dmx3191d.c | 1 drivers/scsi/dtc.c | 10 --- drivers/scsi/dtc.h | 1 drivers/scsi/g_NCR5380.c | 135 ------------------------------------------- drivers/scsi/g_NCR5380.h | 2 drivers/scsi/mac_scsi.c | 14 ---- drivers/scsi/mac_scsi.h | 1 drivers/scsi/pas16.c | 12 --- drivers/scsi/pas16.h | 1 drivers/scsi/sun3_NCR5380.c | 60 +++++++++++-------- drivers/scsi/sun3_scsi.c | 18 ----- drivers/scsi/sun3_scsi.h | 1 drivers/scsi/t128.c | 11 --- drivers/scsi/t128.h | 1 21 files changed, 137 insertions(+), 320 deletions(-)