@@ -1803,6 +1803,13 @@ static int only_one_child(struct pci_bus *bus)
return 0;
if (pci_pcie_type(parent) == PCI_EXP_TYPE_ROOT_PORT)
return 1;
+
+ /*
+ * PCIe downstream ports are bridges that normally lead to only a
+ * device 0, but if PCI_SCAN_ALL_PCIE_DEVS is set, scan all
+ * possible devices, not just device 0. See PCIe spec r3.0,
+ * sec 7.3.1.
+ */
if (parent->has_secondary_link &&
!pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS))
return 1;
@@ -6,69 +6,4 @@
*/
#ifndef _ASM_GENERIC_PCI_BRIDGE_H
#define _ASM_GENERIC_PCI_BRIDGE_H
-
-#ifdef __KERNEL__
-
-enum {
- /* Force re-assigning all resources (ignore firmware
- * setup completely)
- */
- PCI_REASSIGN_ALL_RSRC = 0x00000001,
-
- /* Re-assign all bus numbers */
- PCI_REASSIGN_ALL_BUS = 0x00000002,
-
- /* Do not try to assign, just use existing setup */
- PCI_PROBE_ONLY = 0x00000004,
-
- /* Don't bother with ISA alignment unless the bridge has
- * ISA forwarding enabled
- */
- PCI_CAN_SKIP_ISA_ALIGN = 0x00000008,
-
- /* Enable domain numbers in /proc */
- PCI_ENABLE_PROC_DOMAINS = 0x00000010,
- /* ... except for domain 0 */
- PCI_COMPAT_DOMAIN_0 = 0x00000020,
-
- /* PCIe downstream ports are bridges that normally lead to only a
- * device 0, but if this is set, we scan all possible devices, not
- * just device 0.
- */
- PCI_SCAN_ALL_PCIE_DEVS = 0x00000040,
-};
-
-#ifdef CONFIG_PCI
-extern unsigned int pci_flags;
-
-static inline void pci_set_flags(int flags)
-{
- pci_flags = flags;
-}
-
-static inline void pci_add_flags(int flags)
-{
- pci_flags |= flags;
-}
-
-static inline void pci_clear_flags(int flags)
-{
- pci_flags &= ~flags;
-}
-
-static inline int pci_has_flag(int flag)
-{
- return pci_flags & flag;
-}
-#else
-static inline void pci_set_flags(int flags) { }
-static inline void pci_add_flags(int flags) { }
-static inline void pci_clear_flags(int flags) { }
-static inline int pci_has_flag(int flag)
-{
- return 0;
-}
-#endif /* CONFIG_PCI */
-
-#endif /* __KERNEL__ */
#endif /* _ASM_GENERIC_PCI_BRIDGE_H */
@@ -746,9 +746,26 @@ struct pci_driver {
.vendor = PCI_VENDOR_ID_##vend, .device = (dev), \
.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0
+enum {
+ PCI_REASSIGN_ALL_RSRC = 0x00000001, /* ignore firmware setup */
+ PCI_REASSIGN_ALL_BUS = 0x00000002, /* reassign all bus numbers */
+ PCI_PROBE_ONLY = 0x00000004, /* use existing setup */
+ PCI_CAN_SKIP_ISA_ALIGN = 0x00000008, /* don't do ISA alignment */
+ PCI_ENABLE_PROC_DOMAINS = 0x00000010, /* enable domains in /proc */
+ PCI_COMPAT_DOMAIN_0 = 0x00000020, /* ... except domain 0 */
+ PCI_SCAN_ALL_PCIE_DEVS = 0x00000040, /* scan all, not just dev 0 */
+};
+
/* these external functions are only available when PCI support is enabled */
#ifdef CONFIG_PCI
+extern unsigned int pci_flags;
+
+static inline void pci_set_flags(int flags) { pci_flags = flags; }
+static inline void pci_add_flags(int flags) { pci_flags |= flags; }
+static inline void pci_clear_flags(int flags) { pci_flags &= ~flags; }
+static inline int pci_has_flag(int flag) { return pci_flags & flag; }
+
void pcie_bus_configure_settings(struct pci_bus *bus);
enum pcie_bus_config_types {
@@ -1405,6 +1422,11 @@ void pci_register_set_vga_state(arch_set_vga_state_t func);
#else /* CONFIG_PCI is not enabled */
+static inline void pci_set_flags(int flags) { }
+static inline void pci_add_flags(int flags) { }
+static inline void pci_clear_flags(int flags) { }
+static inline int pci_has_flag(int flag) { return 0; }
+
/*
* If the system does not have PCI, clearly these return errors. Define
* these as simple inline functions to avoid hair in drivers.
The PCI flag management constants and functions were previously declared in include/asm-generic/pci-bridge.h. But they are not specific to bridges, and arches did not include pci-bridge.h consistently. Move the following interfaces and related constants to include/linux/pci.h and remove pci-bridge.h: pci_set_flags() pci_add_flags() pci_clear_flags() pci_has_flag() This fixes these warnings when building for some arches: drivers/pci/host/pcie-designware.c:562:20: error: 'PCI_PROBE_ONLY' undeclared (first use in this function) drivers/pci/host/pcie-designware.c:562:7: error: implicit declaration of function 'pci_has_flag' [-Werror=implicit-function-declaration] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> --- drivers/pci/probe.c | 7 ++++ include/asm-generic/pci-bridge.h | 65 -------------------------------------- include/linux/pci.h | 22 +++++++++++++ 3 files changed, 29 insertions(+), 65 deletions(-)