===================================================================
@@ -469,34 +469,9 @@ static void prepare_info(struct Scsi_Hos
#ifdef PARITY
"PARITY "
#endif
-#ifdef PSEUDO_DMA
- "PSEUDO_DMA "
-#endif
"");
}
-#ifdef PSEUDO_DMA
-static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance,
- char *buffer, int length)
-{
- struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
- hostdata->spin_max_r = 0;
- hostdata->spin_max_w = 0;
- return 0;
-}
-
-static int __maybe_unused NCR5380_show_info(struct seq_file *m,
- struct Scsi_Host *instance)
-{
- struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
- seq_printf(m, "Highwater I/O busy spin counts: write %d, read %d\n",
- hostdata->spin_max_w, hostdata->spin_max_r);
- return 0;
-}
-#endif
-
/**
* NCR5380_init - initialise an NCR5380
* @instance: adapter to configure
@@ -1436,7 +1411,6 @@ timeout:
return -1;
}
-#if defined(PSEUDO_DMA)
/*
* Function : int NCR5380_transfer_dma (struct Scsi_Host *instance,
* unsigned char *phase, int *count, unsigned char **data)
@@ -1592,7 +1566,6 @@ static int NCR5380_transfer_dma(struct S
*phase = NCR5380_read(STATUS_REG) & PHASE_MASK;
return foo;
}
-#endif /* PSEUDO_DMA */
/*
* Function : NCR5380_information_transfer (struct Scsi_Host *instance)
@@ -1683,7 +1656,6 @@ static void NCR5380_information_transfer
* in an unconditional loop.
*/
-#if defined(PSEUDO_DMA)
transfersize = 0;
if (!cmd->device->borken)
transfersize = NCR5380_dma_xfer_len(instance, cmd, phase);
@@ -1706,9 +1678,7 @@ static void NCR5380_information_transfer
/* XXX - need to source or sink data here, as appropriate */
} else
cmd->SCp.this_residual -= transfersize - len;
- } else
-#endif /* PSEUDO_DMA */
- {
+ } else {
/* Break up transfer into 3 ms chunks,
* presuming 6 accesses per handshake.
*/
===================================================================
@@ -257,10 +257,6 @@ struct NCR5380_hostdata {
#ifdef SUPPORT_TAGS
struct tag_alloc TagAlloc[8][8]; /* 8 targets and 8 LUNs */
#endif
-#ifdef PSEUDO_DMA
- unsigned spin_max_r;
- unsigned spin_max_w;
-#endif
struct workqueue_struct *work_q;
unsigned long accesses_per_ms; /* chip register accesses per ms */
};
===================================================================
@@ -13,8 +13,6 @@
#include <scsi/scsi_host.h>
-#define PSEUDO_DMA
-
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
#define NCR5380_read(reg) cumanascsi_read(instance, reg)
#define NCR5380_write(reg, value) cumanascsi_write(instance, reg, value)
===================================================================
@@ -14,7 +14,6 @@
#include <scsi/scsi_host.h>
-/*#define PSEUDO_DMA*/
#define DONT_USE_INTR
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
@@ -24,7 +23,7 @@
#define NCR5380_write(reg, value) \
writeb(value, priv(instance)->base + ((reg) << 2))
-#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize)
+#define NCR5380_dma_xfer_len(instance, cmd, phase) (0)
#define NCR5380_queue_command oakscsi_queue_command
#define NCR5380_info oakscsi_info
===================================================================
@@ -1,4 +1,3 @@
-#define PSEUDO_DMA
#define DONT_USE_INTR
/*
@@ -352,8 +351,6 @@ static inline int NCR5380_pread(struct S
while (!(NCR5380_read(DTC_CONTROL_REG) & D_CR_ACCESS))
++i;
rtrc(0);
- if (i > hostdata->spin_max_r)
- hostdata->spin_max_r = i;
return (0);
}
@@ -400,8 +397,6 @@ static inline int NCR5380_pwrite(struct
rtrc(7);
/* Check for parity error here. fixme. */
rtrc(0);
- if (i > hostdata->spin_max_w)
- hostdata->spin_max_w = i;
return (0);
}
@@ -440,8 +435,6 @@ static struct scsi_host_template driver_
.detect = dtc_detect,
.release = dtc_release,
.proc_name = "dtc3x80",
- .show_info = dtc_show_info,
- .write_info = dtc_write_info,
.info = dtc_info,
.queuecommand = dtc_queue_command,
.eh_abort_handler = dtc_abort,
===================================================================
@@ -57,7 +57,6 @@
*/
#define AUTOPROBE_IRQ
-#define PSEUDO_DMA
#include <asm/io.h>
#include <linux/blkdev.h>
===================================================================
@@ -28,8 +28,6 @@
/* Definitions for the core NCR5380 driver. */
-#define PSEUDO_DMA
-
#define NCR5380_implementation_fields unsigned char *pdma_base
#define NCR5380_read(reg) macscsi_read(instance, reg)
@@ -46,8 +44,6 @@
#define NCR5380_abort macscsi_abort
#define NCR5380_bus_reset macscsi_bus_reset
#define NCR5380_info macscsi_info
-#define NCR5380_show_info macscsi_show_info
-#define NCR5380_write_info macscsi_write_info
#include "NCR5380.h"
@@ -111,7 +107,6 @@ static int __init mac_scsi_setup(char *s
__setup("mac5380=", mac_scsi_setup);
#endif /* !MODULE */
-#ifdef PSEUDO_DMA
/*
Pseudo-DMA: (Ove Edlund)
The code attempts to catch bus errors that occur if one for example
@@ -303,7 +298,6 @@ static int macscsi_pwrite(struct Scsi_Ho
return 0;
}
-#endif
static int macscsi_dma_xfer_len(struct Scsi_Host *instance,
struct scsi_cmnd *cmd)
@@ -324,8 +318,6 @@ static int macscsi_dma_xfer_len(struct S
static struct scsi_host_template mac_scsi_template = {
.module = THIS_MODULE,
.proc_name = DRV_MODULE_NAME,
- .show_info = macscsi_show_info,
- .write_info = macscsi_write_info,
.name = "Macintosh NCR5380 SCSI",
.info = macscsi_info,
.queuecommand = macscsi_queue_command,
@@ -351,9 +343,7 @@ static int __init mac_scsi_probe(struct
if (!pio_mem)
return -ENODEV;
-#ifdef PSEUDO_DMA
pdma_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-#endif
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
===================================================================
@@ -1,5 +1,3 @@
-#define PSEUDO_DMA
-
/*
* This driver adapted from Drew Eckhardt's Trantor T128 driver
*
@@ -479,7 +477,6 @@ static inline int NCR5380_pread (struct
P_DATA_REG_OFFSET);
register int i = len;
int ii = 0;
- struct NCR5380_hostdata *hostdata = shost_priv(instance);
while ( !(inb(instance->io_port + P_STATUS_REG_OFFSET) & P_ST_RDY) )
++ii;
@@ -492,8 +489,6 @@ static inline int NCR5380_pread (struct
instance->host_no);
return -1;
}
- if (ii > hostdata->spin_max_r)
- hostdata->spin_max_r = ii;
return 0;
}
@@ -516,7 +511,6 @@ static inline int NCR5380_pwrite (struct
register unsigned short reg = (instance->io_port + P_DATA_REG_OFFSET);
register int i = len;
int ii = 0;
- struct NCR5380_hostdata *hostdata = shost_priv(instance);
while ( !((inb(instance->io_port + P_STATUS_REG_OFFSET)) & P_ST_RDY) )
++ii;
@@ -529,8 +523,6 @@ static inline int NCR5380_pwrite (struct
instance->host_no);
return -1;
}
- if (ii > hostdata->spin_max_w)
- hostdata->spin_max_w = ii;
return 0;
}
@@ -550,8 +542,6 @@ static struct scsi_host_template driver_
.detect = pas16_detect,
.release = pas16_release,
.proc_name = "pas16",
- .show_info = pas16_show_info,
- .write_info = pas16_write_info,
.info = pas16_info,
.queuecommand = pas16_queue_command,
.eh_abort_handler = pas16_abort,
===================================================================
@@ -1,5 +1,3 @@
-#define PSEUDO_DMA
-
/*
* Trantor T128/T128F/T228 driver
* Note : architecturally, the T100 and T130 are different and won't
@@ -394,8 +392,6 @@ static struct scsi_host_template driver_
.detect = t128_detect,
.release = t128_release,
.proc_name = "t128",
- .show_info = t128_show_info,
- .write_info = t128_write_info,
.info = t128_info,
.queuecommand = t128_queue_command,
.eh_abort_handler = t128_abort,
===================================================================
@@ -39,6 +39,10 @@
#define NCR5380_read(reg) inb(instance->io_port + reg)
#define NCR5380_write(reg, value) outb(value, instance->io_port + reg)
+#define NCR5380_dma_xfer_len(instance, cmd, phase) (0)
+#define NCR5380_pread(instance, dst, len) (0)
+#define NCR5380_pwrite(instance, src, len) (0)
+
#define NCR5380_implementation_fields /* none */
#include "NCR5380.h"
===================================================================
@@ -27,8 +27,6 @@
#define NCR5380_abort dtc_abort
#define NCR5380_bus_reset dtc_bus_reset
#define NCR5380_info dtc_info
-#define NCR5380_show_info dtc_show_info
-#define NCR5380_write_info dtc_write_info
/* 15 12 11 10
1001 1100 0000 0000 */
===================================================================
@@ -70,7 +70,6 @@
#define NCR5380_pread generic_NCR5380_pread
#define NCR5380_pwrite generic_NCR5380_pwrite
#define NCR5380_info generic_NCR5380_info
-#define NCR5380_show_info generic_NCR5380_show_info
#define BOARD_NCR5380 0
#define BOARD_NCR53C400 1
===================================================================
@@ -109,8 +109,6 @@
#define NCR5380_abort pas16_abort
#define NCR5380_bus_reset pas16_bus_reset
#define NCR5380_info pas16_info
-#define NCR5380_show_info pas16_show_info
-#define NCR5380_write_info pas16_write_info
/* 15 14 12 10 7 5 3
1101 0100 1010 1000 */
===================================================================
@@ -83,8 +83,6 @@
#define NCR5380_abort t128_abort
#define NCR5380_bus_reset t128_bus_reset
#define NCR5380_info t128_info
-#define NCR5380_show_info t128_show_info
-#define NCR5380_write_info t128_write_info
/* 15 14 12 10 7 5 3
1101 0100 1010 1000 */
For those wrapper drivers which only implement Programmed IO, have NCR5380_dma_xfer_len() evaluate to zero. That allows PDMA to be easily disabled at run-time and so the PSEUDO_DMA macro is no longer needed. Also remove the spin counters used for debugging pseudo DMA drivers. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> --- drivers/scsi/NCR5380.c | 32 +------------------------------- drivers/scsi/NCR5380.h | 4 ---- drivers/scsi/arm/cumana_1.c | 2 -- drivers/scsi/arm/oak.c | 3 +-- drivers/scsi/dmx3191d.c | 4 ++++ drivers/scsi/dtc.c | 7 ------- drivers/scsi/dtc.h | 2 -- drivers/scsi/g_NCR5380.c | 1 - drivers/scsi/g_NCR5380.h | 1 - drivers/scsi/mac_scsi.c | 10 ---------- drivers/scsi/pas16.c | 10 ---------- drivers/scsi/pas16.h | 2 -- drivers/scsi/t128.c | 4 ---- drivers/scsi/t128.h | 2 -- 14 files changed, 6 insertions(+), 78 deletions(-)