diff mbox

[1/3] ARM: dts: imx7d: create i.MX 7Solo base device tree

Message ID 20160608023709.32090-2-stefan@agner.ch (mailing list archive)
State New, archived
Headers show

Commit Message

Stefan Agner June 8, 2016, 2:37 a.m. UTC 
The i.MX 7 series currently consists of two SoCs: i.MX 7Solo and
7Dual. The i.MX 7Solo implements a subset of features available on
i.MX 7Dual, hence create imx7s.dtsi as the base device tree. The
i.MX 7Dual's additional features over i.MX 7Solo are:
- Second Cortex-A7 core
- Second Gigabit Ethernet controller
- EPD (Electronc Paper Display, not yet part of the device tree)
- PCIe (not yet part of the device tree)
- Additional USB2.0 OTG controller

Signed-off-by: Stefan Agner <stefan@agner.ch>
---
 arch/arm/boot/dts/imx7d.dtsi | 923 +++----------------------------------------
 arch/arm/boot/dts/imx7s.dtsi | 880 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 928 insertions(+), 875 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx7s.dtsi

Comments

Shawn Guo June 12, 2016, 1:35 a.m. UTC | #1 
On Tue, Jun 07, 2016 at 07:37:07PM -0700, Stefan Agner wrote:
> The i.MX 7 series currently consists of two SoCs: i.MX 7Solo and
> 7Dual. The i.MX 7Solo implements a subset of features available on
> i.MX 7Dual, hence create imx7s.dtsi as the base device tree. The
> i.MX 7Dual's additional features over i.MX 7Solo are:
> - Second Cortex-A7 core
> - Second Gigabit Ethernet controller
> - EPD (Electronc Paper Display, not yet part of the device tree)
> - PCIe (not yet part of the device tree)
> - Additional USB2.0 OTG controller
> 
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
>  arch/arm/boot/dts/imx7d.dtsi | 923 +++----------------------------------------
>  arch/arm/boot/dts/imx7s.dtsi | 880 +++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 928 insertions(+), 875 deletions(-)

We should probably have a beforehand patch to rename the file, so that
we can avoid this dramatic diffstat.

Shawn
Stefan Agner June 19, 2016, 4:20 a.m. UTC | #2 
On 2016-06-11 18:35, Shawn Guo wrote:
> On Tue, Jun 07, 2016 at 07:37:07PM -0700, Stefan Agner wrote:
>> The i.MX 7 series currently consists of two SoCs: i.MX 7Solo and
>> 7Dual. The i.MX 7Solo implements a subset of features available on
>> i.MX 7Dual, hence create imx7s.dtsi as the base device tree. The
>> i.MX 7Dual's additional features over i.MX 7Solo are:
>> - Second Cortex-A7 core
>> - Second Gigabit Ethernet controller
>> - EPD (Electronc Paper Display, not yet part of the device tree)
>> - PCIe (not yet part of the device tree)
>> - Additional USB2.0 OTG controller
>>
>> Signed-off-by: Stefan Agner <stefan@agner.ch>
>> ---
>>  arch/arm/boot/dts/imx7d.dtsi | 923 +++----------------------------------------
>>  arch/arm/boot/dts/imx7s.dtsi | 880 +++++++++++++++++++++++++++++++++++++++++
>>  2 files changed, 928 insertions(+), 875 deletions(-)
> 
> We should probably have a beforehand patch to rename the file, so that
> we can avoid this dramatic diffstat.

If I delete imx7d.dtsi and add imx7s.dtsi in a single commit, and then
readd imx7d.dtsi in a second commit, it would break bisect-ability. All
existing device trees which include imx7d.dtsi would fail to build.

As soon as I keep imx7d.dtsi around, even if it only includes
imx7s.dtsi, git diff stats look dramatic with git default options.

Using -B -M makes the diff stat a bit less dramatic:

 arch/arm/boot/dts/imx7d.dtsi                 | 1083
+++++++++++---------------------------------------------------------------------------
 arch/arm/boot/dts/{imx7d.dtsi => imx7s.dtsi} |   79 +------
 2 files changed, 130 insertions(+), 1032 deletions(-)

However, that is only for stats, and only when using those options...

I would rather prefer to keep it in a single commit. What do you think?

--
Stefan
Shawn Guo June 21, 2016, 3:20 a.m. UTC | #3 
On Sat, Jun 18, 2016 at 09:20:05PM -0700, Stefan Agner wrote:
> On 2016-06-11 18:35, Shawn Guo wrote:
> > On Tue, Jun 07, 2016 at 07:37:07PM -0700, Stefan Agner wrote:
> >> The i.MX 7 series currently consists of two SoCs: i.MX 7Solo and
> >> 7Dual. The i.MX 7Solo implements a subset of features available on
> >> i.MX 7Dual, hence create imx7s.dtsi as the base device tree. The
> >> i.MX 7Dual's additional features over i.MX 7Solo are:
> >> - Second Cortex-A7 core
> >> - Second Gigabit Ethernet controller
> >> - EPD (Electronc Paper Display, not yet part of the device tree)
> >> - PCIe (not yet part of the device tree)
> >> - Additional USB2.0 OTG controller
> >>
> >> Signed-off-by: Stefan Agner <stefan@agner.ch>
> >> ---
> >>  arch/arm/boot/dts/imx7d.dtsi | 923 +++----------------------------------------
> >>  arch/arm/boot/dts/imx7s.dtsi | 880 +++++++++++++++++++++++++++++++++++++++++
> >>  2 files changed, 928 insertions(+), 875 deletions(-)
> > 
> > We should probably have a beforehand patch to rename the file, so that
> > we can avoid this dramatic diffstat.
> 
> If I delete imx7d.dtsi and add imx7s.dtsi in a single commit, and then
> readd imx7d.dtsi in a second commit, it would break bisect-ability. All
> existing device trees which include imx7d.dtsi would fail to build.

I was thinking that we would patch imx7d.dtsi users to include
imx7s.dtsi in the first patch that does renaming, and then patch them
back in the second patch that adds imx7d.dtsi.  It sounds a bit silly,
but it really helps to make the history clear and diffstats nice.  It
looks like something below.

commit 49669c3630183bb1a36fcaf4bef324a7d839a5fd
Date:   Tue Jun 21 11:13:02 2016 +0800

    add imx7d.dtsi and patch users back

 arch/arm/boot/dts/imx7d-cl-som-imx7.dts |  2 +-
 arch/arm/boot/dts/imx7d-nitrogen7.dts   |  2 +-
 arch/arm/boot/dts/imx7d-sdb.dts         |  2 +-
 arch/arm/boot/dts/imx7d.dtsi            | 11 +++++++++++
 arch/arm/boot/dts/imx7s.dtsi            |  6 ------
 5 files changed, 14 insertions(+), 9 deletions(-)

commit 7e1c82e1aee3d6e694901cea3dd74e9b4ec6643e
Date:   Tue Jun 21 11:04:02 2016 +0800

    rename imx7d.dtsi to imx7s.dtsi

 arch/arm/boot/dts/imx7d-cl-som-imx7.dts      | 2 +-
 arch/arm/boot/dts/imx7d-nitrogen7.dts        | 2 +-
 arch/arm/boot/dts/imx7d-sdb.dts              | 2 +-
 arch/arm/boot/dts/{imx7d.dtsi => imx7s.dtsi} | 0
 4 files changed, 3 insertions(+), 3 deletions(-)

Shawn
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 6b3faa2..51c13cb 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -1,5 +1,6 @@ 
 /*
  * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2016 Toradex AG
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -40,54 +41,10 @@ 
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include <dt-bindings/clock/imx7d-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "imx7d-pinfunc.h"
-#include "skeleton.dtsi"
+#include "imx7s.dtsi"
 
 / {
-	aliases {
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		gpio6 = &gpio7;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		serial6 = &uart7;
-	};
-
 	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0>;
-			operating-points = <
-				/* KHz	uV */
-				996000	1075000
-				792000	975000
-			>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			clocks = <&clks IMX7D_CLK_ARM>;
-		};
-
 		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
@@ -95,221 +52,6 @@ 
 		};
 	};
 
-	intc: interrupt-controller@31001000 {
-		compatible = "arm,cortex-a7-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x31001000 0x1000>,
-		      <0x31002000 0x1000>,
-		      <0x31004000 0x2000>,
-		      <0x31006000 0x2000>;
-	};
-
-	ckil: clock-cki {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "ckil";
-	};
-
-	osc: clock-osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "osc";
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		interrupt-parent = <&intc>;
-	};
-
-	etr@30086000 {
-		compatible = "arm,coresight-tmc", "arm,primecell";
-		reg = <0x30086000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		port {
-			etr_in_port: endpoint {
-				slave-mode;
-				remote-endpoint = <&replicator_out_port1>;
-			};
-		};
-	};
-
-	tpiu@30087000 {
-		compatible = "arm,coresight-tpiu", "arm,primecell";
-		reg = <0x30087000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		port {
-			tpiu_in_port: endpoint {
-				slave-mode;
-				remote-endpoint = <&replicator_out_port1>;
-			};
-		};
-	};
-
-	replicator {
-		/*
-		 * non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell"
-		 */
-		compatible = "arm,coresight-replicator";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* replicator output ports */
-			port@0 {
-				reg = <0>;
-				replicator_out_port0: endpoint {
-					remote-endpoint = <&tpiu_in_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				replicator_out_port1: endpoint {
-					remote-endpoint = <&etr_in_port>;
-				};
-			};
-
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
-				replicator_in_port0: endpoint {
-					slave-mode;
-					remote-endpoint = <&etf_out_port>;
-				};
-			};
-		};
-	};
-
-	etf@30084000 {
-		compatible = "arm,coresight-tmc", "arm,primecell";
-		reg = <0x30084000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				etf_in_port: endpoint {
-					slave-mode;
-					remote-endpoint = <&hugo_funnel_out_port0>;
-				};
-			};
-
-			port@1 {
-				reg = <0>;
-				etf_out_port: endpoint {
-					remote-endpoint = <&replicator_in_port0>;
-				};
-			};
-		};
-	};
-
-	funnel@30083000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
-		reg = <0x30083000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel input ports */
-			port@0 {
-				reg = <0>;
-				hugo_funnel_in_port0: endpoint {
-					slave-mode;
-					remote-endpoint = <&ca_funnel_out_port0>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				hugo_funnel_in_port1: endpoint {
-					slave-mode; /* M4 input */
-				};
-			};
-
-			port@2 {
-				reg = <0>;
-				hugo_funnel_out_port0: endpoint {
-					remote-endpoint = <&etf_in_port>;
-				};
-			};
-
-			/* the other input ports are not connect to anything */
-		};
-	};
-
-	funnel@30041000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
-		reg = <0x30041000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel input ports */
-			port@0 {
-				reg = <0>;
-				ca_funnel_in_port0: endpoint {
-					slave-mode;
-					remote-endpoint = <&etm0_out_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				ca_funnel_in_port1: endpoint {
-					slave-mode;
-					remote-endpoint = <&etm1_out_port>;
-				};
-			};
-
-			/* funnel output port */
-			port@2 {
-				reg = <0>;
-				ca_funnel_out_port0: endpoint {
-					remote-endpoint = <&hugo_funnel_in_port0>;
-				};
-			};
-
-			/* the other input ports are not connect to anything */
-		};
-	};
-
-	etm@3007c000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0x3007c000 0x1000>;
-		cpu = <&cpu0>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		port {
-			etm0_out_port: endpoint {
-				remote-endpoint = <&ca_funnel_in_port0>;
-			};
-		};
-	};
-
 	etm@3007d000 {
 		compatible = "arm,coresight-etm3x", "arm,primecell";
 		reg = <0x3007d000 0x1000>;
@@ -330,626 +72,57 @@ 
 			};
 		};
 	};
+};
 
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		aips1: aips-bus@30000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30000000 0x400000>;
-			ranges;
-
-			gpio1: gpio@30200000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30200000 0x10000>;
-				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
-					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@30210000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30210000 0x10000>;
-				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio@30220000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30220000 0x10000>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio@30230000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30230000 0x10000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio5: gpio@30240000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30240000 0x10000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio6: gpio@30250000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30250000 0x10000>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio7: gpio@30260000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30260000 0x10000>;
-				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			wdog1: wdog@30280000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x30280000 0x10000>;
-				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
-			};
-
-			wdog2: wdog@30290000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x30290000 0x10000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			wdog3: wdog@302a0000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x302a0000 0x10000>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			wdog4: wdog@302b0000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x302b0000 0x10000>;
-				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			iomuxc_lpsr: iomuxc-lpsr@302c0000 {
-				compatible = "fsl,imx7d-iomuxc-lpsr";
-				reg = <0x302c0000 0x10000>;
-				fsl,input-sel = <&iomuxc>;
-			};
-
-			gpt1: gpt@302d0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302d0000 0x10000>;
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt2: gpt@302e0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302e0000 0x10000>;
-				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt3: gpt@302f0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302f0000 0x10000>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt4: gpt@30300000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x30300000 0x10000>;
-				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			iomuxc: iomuxc@30330000 {
-				compatible = "fsl,imx7d-iomuxc";
-				reg = <0x30330000 0x10000>;
-			};
-
-			gpr: iomuxc-gpr@30340000 {
-				compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
-				reg = <0x30340000 0x10000>;
-			};
-
-			ocotp: ocotp-ctrl@30350000 {
-				compatible = "syscon";
-				reg = <0x30350000 0x10000>;
-				clocks = <&clks IMX7D_CLK_DUMMY>;
-				status = "disabled";
-			};
-
-			anatop: anatop@30360000 {
-				compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
-					"syscon", "simple-bus";
-				reg = <0x30360000 0x10000>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-
-				reg_1p0d: regulator-vdd1p0d@210 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd1p0d";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1200000>;
-					anatop-reg-offset = <0x210>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <8>;
-					anatop-min-voltage = <800000>;
-					anatop-max-voltage = <1200000>;
-					anatop-enable-bit = <31>;
-				};
-			};
-
-			snvs: snvs@30370000 {
-				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
-				reg = <0x30370000 0x10000>;
-
-				snvs_rtc: snvs-rtc-lp {
-					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					regmap = <&snvs>;
-					offset = <0x34>;
-					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				snvs_poweroff: snvs-poweroff {
-					compatible = "syscon-poweroff";
-					regmap = <&snvs>;
-					offset = <0x38>;
-					mask = <0x60>;
-				};
-
-				snvs_pwrkey: snvs-powerkey {
-					compatible = "fsl,sec-v4.0-pwrkey";
-					regmap = <&snvs>;
-					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-					linux,keycode = <KEY_POWER>;
-					wakeup-source;
-				};
-			};
-
-			clks: ccm@30380000 {
-				compatible = "fsl,imx7d-ccm";
-				reg = <0x30380000 0x10000>;
-				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				#clock-cells = <1>;
-				clocks = <&ckil>, <&osc>;
-				clock-names = "ckil", "osc";
-			};
-
-			src: src@30390000 {
-				compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
-				reg = <0x30390000 0x10000>;
-				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-				#reset-cells = <1>;
-			};
-		};
-
-		aips2: aips-bus@30400000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30400000 0x400000>;
-			ranges;
-
-			adc1: adc@30610000 {
-				compatible = "fsl,imx7d-adc";
-				reg = <0x30610000 0x10000>;
-				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
-				clock-names = "adc";
-				status = "disabled";
-			};
-
-			adc2: adc@30620000 {
-				compatible = "fsl,imx7d-adc";
-				reg = <0x30620000 0x10000>;
-				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
-				clock-names = "adc";
-				status = "disabled";
-			};
-
-			pwm1: pwm@30660000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30660000 0x10000>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
-					 <&clks IMX7D_PWM1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			pwm2: pwm@30670000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30670000 0x10000>;
-				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
-					 <&clks IMX7D_PWM2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			pwm3: pwm@30680000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30680000 0x10000>;
-				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
-					 <&clks IMX7D_PWM3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			pwm4: pwm@30690000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30690000 0x10000>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
-					 <&clks IMX7D_PWM4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			lcdif: lcdif@30730000 {
-				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
-				reg = <0x30730000 0x10000>;
-				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
-					<&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>;
-				clock-names = "pix", "axi", "disp_axi";
-				status = "disabled";
-			};
-		};
-
-		aips3: aips-bus@30800000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30800000 0x400000>;
-			ranges;
-
-			uart1: serial@30860000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30860000 0x10000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART1_ROOT_CLK>,
-					<&clks IMX7D_UART1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@30890000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30890000 0x10000>;
-				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART2_ROOT_CLK>,
-					<&clks IMX7D_UART2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart3: serial@30880000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30880000 0x10000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART3_ROOT_CLK>,
-					<&clks IMX7D_UART3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			flexcan1: can@30a00000 {
-				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x30a00000 0x10000>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CAN1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			flexcan2: can@30a10000 {
-				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x30a10000 0x10000>;
-				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CAN2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c1: i2c@30a20000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a20000 0x10000>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@30a30000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a30000 0x10000>;
-				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@30a40000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a40000 0x10000>;
-				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c4: i2c@30a50000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a50000 0x10000>;
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			uart4: serial@30a60000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a60000 0x10000>;
-				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART4_ROOT_CLK>,
-					<&clks IMX7D_UART4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart5: serial@30a70000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a70000 0x10000>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART5_ROOT_CLK>,
-					<&clks IMX7D_UART5_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart6: serial@30a80000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a80000 0x10000>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART6_ROOT_CLK>,
-					<&clks IMX7D_UART6_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart7: serial@30a90000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a90000 0x10000>;
-				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART7_ROOT_CLK>,
-					<&clks IMX7D_UART7_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			usbotg1: usb@30b10000 {
-				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
-				reg = <0x30b10000 0x200>;
-				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_USB_CTRL_CLK>;
-				fsl,usbphy = <&usbphynop1>;
-				fsl,usbmisc = <&usbmisc1 0>;
-				phy-clkgate-delay-us = <400>;
-				status = "disabled";
-			};
-
-			usbotg2: usb@30b20000 {
-				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
-				reg = <0x30b20000 0x200>;
-				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_USB_CTRL_CLK>;
-				fsl,usbphy = <&usbphynop2>;
-				fsl,usbmisc = <&usbmisc2 0>;
-				phy-clkgate-delay-us = <400>;
-				status = "disabled";
-			};
-
-			usbh: usb@30b30000 {
-				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
-				reg = <0x30b30000 0x200>;
-				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_USB_CTRL_CLK>;
-				fsl,usbphy = <&usbphynop3>;
-				fsl,usbmisc = <&usbmisc3 0>;
-				phy_type = "hsic";
-				dr_mode = "host";
-				phy-clkgate-delay-us = <400>;
-				status = "disabled";
-			};
-
-			usbmisc1: usbmisc@30b10200 {
-				#index-cells = <1>;
-				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x30b10200 0x200>;
-			};
-
-			usbmisc2: usbmisc@30b20200 {
-				#index-cells = <1>;
-				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x30b20200 0x200>;
-			};
-
-			usbmisc3: usbmisc@30b30200 {
-				#index-cells = <1>;
-				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x30b30200 0x200>;
-			};
-
-			usbphynop1: usbphynop1 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks IMX7D_USB_PHY1_CLK>;
-				clock-names = "main_clk";
-			};
-
-			usbphynop2: usbphynop2 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks IMX7D_USB_PHY2_CLK>;
-				clock-names = "main_clk";
-			};
-
-			usbphynop3: usbphynop3 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
-				clock-names = "main_clk";
-			};
-
-			usdhc1: usdhc@30b40000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b40000 0x10000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_USDHC1_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
+&aips3 {
+	usbotg2: usb@30b20000 {
+		compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+		reg = <0x30b20000 0x200>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_USB_CTRL_CLK>;
+		fsl,usbphy = <&usbphynop2>;
+		fsl,usbmisc = <&usbmisc2 0>;
+		phy-clkgate-delay-us = <400>;
+		status = "disabled";
+	};
 
-			usdhc2: usdhc@30b50000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b50000 0x10000>;
-				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_USDHC2_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
+	usbmisc2: usbmisc@30b20200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+		reg = <0x30b20200 0x200>;
+	};
 
-			usdhc3: usdhc@30b60000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b60000 0x10000>;
-				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_USDHC3_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_PHY2_CLK>;
+		clock-names = "main_clk";
+	};
 
-			fec1: ethernet@30be0000 {
-				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
-				reg = <0x30be0000 0x10000>;
-				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
-					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
-					<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
-					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
-					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "ptp",
-					"enet_clk_ref", "enet_out";
-				fsl,num-tx-queues=<3>;
-				fsl,num-rx-queues=<3>;
-				status = "disabled";
-			};
+	fec2: ethernet@30bf0000 {
+		compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+		reg = <0x30bf0000 0x10000>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+			<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+			<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
+			<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+			<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+		clock-names = "ipg", "ahb", "ptp",
+			"enet_clk_ref", "enet_out";
+		fsl,num-tx-queues=<3>;
+		fsl,num-rx-queues=<3>;
+		status = "disabled";
+	};
+};
 
-			fec2: ethernet@30bf0000 {
-				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
-				reg = <0x30bf0000 0x10000>;
-				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
-					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
-					<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
-					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
-					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "ptp",
-					"enet_clk_ref", "enet_out";
-				fsl,num-tx-queues=<3>;
-				fsl,num-rx-queues=<3>;
-				status = "disabled";
-			};
+&ca_funnel_ports {
+	port@1 {
+		reg = <1>;
+		ca_funnel_in_port1: endpoint {
+			slave-mode;
+			remote-endpoint = <&etm1_out_port>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
new file mode 100644
index 0000000..a5fd2d7
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -0,0 +1,880 @@ 
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/imx7d-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx7d-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			operating-points = <
+				/* KHz	uV */
+				996000	1075000
+				792000	975000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX7D_CLK_ARM>;
+		};
+	};
+
+	intc: interrupt-controller@31001000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x31001000 0x1000>,
+		      <0x31002000 0x1000>,
+		      <0x31004000 0x2000>,
+		      <0x31006000 0x2000>;
+	};
+
+	ckil: clock-cki {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&intc>;
+	};
+
+	etr@30086000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0x30086000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		port {
+			etr_in_port: endpoint {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port1>;
+			};
+		};
+	};
+
+	tpiu@30087000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0x30087000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		port {
+			tpiu_in_port: endpoint {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port1>;
+			};
+		};
+	};
+
+	replicator {
+		/*
+		 * non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell"
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etr_in_port>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&etf_out_port>;
+				};
+			};
+		};
+	};
+
+	etf@30084000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0x30084000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				etf_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&hugo_funnel_out_port0>;
+				};
+			};
+
+			port@1 {
+				reg = <0>;
+				etf_out_port: endpoint {
+					remote-endpoint = <&replicator_in_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@30083000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0x30083000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel input ports */
+			port@0 {
+				reg = <0>;
+				hugo_funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&ca_funnel_out_port0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				hugo_funnel_in_port1: endpoint {
+					slave-mode; /* M4 input */
+				};
+			};
+
+			port@2 {
+				reg = <0>;
+				hugo_funnel_out_port0: endpoint {
+					remote-endpoint = <&etf_in_port>;
+				};
+			};
+
+			/* the other input ports are not connect to anything */
+		};
+	};
+
+	funnel@30041000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0x30041000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		ca_funnel_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel input ports */
+			port@0 {
+				reg = <0>;
+				ca_funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&etm0_out_port>;
+				};
+			};
+
+			/* funnel output port */
+			port@2 {
+				reg = <0>;
+				ca_funnel_out_port0: endpoint {
+					remote-endpoint = <&hugo_funnel_in_port0>;
+				};
+			};
+
+			/* the other input ports are not connect to anything */
+		};
+	};
+
+	etm@3007c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x3007c000 0x1000>;
+		cpu = <&cpu0>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		port {
+			etm0_out_port: endpoint {
+				remote-endpoint = <&ca_funnel_in_port0>;
+			};
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		aips1: aips-bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30000000 0x400000>;
+			ranges;
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@30250000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30250000 0x10000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio7: gpio@30260000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30260000 0x10000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			wdog1: wdog@30280000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
+			};
+
+			wdog2: wdog@30290000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			wdog3: wdog@302a0000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			wdog4: wdog@302b0000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x302b0000 0x10000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			iomuxc_lpsr: iomuxc-lpsr@302c0000 {
+				compatible = "fsl,imx7d-iomuxc-lpsr";
+				reg = <0x302c0000 0x10000>;
+				fsl,input-sel = <&iomuxc>;
+			};
+
+			gpt1: gpt@302d0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302d0000 0x10000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt2: gpt@302e0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302e0000 0x10000>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt3: gpt@302f0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302f0000 0x10000>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt4: gpt@30300000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x30300000 0x10000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@30330000 {
+				compatible = "fsl,imx7d-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: iomuxc-gpr@30340000 {
+				compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: ocotp-ctrl@30350000 {
+				compatible = "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clks IMX7D_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			anatop: anatop@30360000 {
+				compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
+					"syscon", "simple-bus";
+				reg = <0x30360000 0x10000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_1p0d: regulator-vdd1p0d@210 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p0d";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1200000>;
+					anatop-reg-offset = <0x210>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <8>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1200000>;
+					anatop-enable-bit = <31>;
+				};
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+				};
+			};
+
+			clks: ccm@30380000 {
+				compatible = "fsl,imx7d-ccm";
+				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>;
+				clock-names = "ckil", "osc";
+			};
+
+			src: src@30390000 {
+				compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+		};
+
+		aips2: aips-bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30400000 0x400000>;
+			ranges;
+
+			adc1: adc@30610000 {
+				compatible = "fsl,imx7d-adc";
+				reg = <0x30610000 0x10000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
+			adc2: adc@30620000 {
+				compatible = "fsl,imx7d-adc";
+				reg = <0x30620000 0x10000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
+					 <&clks IMX7D_PWM1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
+					 <&clks IMX7D_PWM2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
+					 <&clks IMX7D_PWM3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
+					 <&clks IMX7D_PWM4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			lcdif: lcdif@30730000 {
+				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+				reg = <0x30730000 0x10000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+		};
+
+		aips3: aips-bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30800000 0x400000>;
+			ranges;
+
+			uart1: serial@30860000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30860000 0x10000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART1_ROOT_CLK>,
+					<&clks IMX7D_UART1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@30890000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30890000 0x10000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART2_ROOT_CLK>,
+					<&clks IMX7D_UART2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@30880000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30880000 0x10000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART3_ROOT_CLK>,
+					<&clks IMX7D_UART3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			flexcan1: can@30a00000 {
+				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x30a00000 0x10000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CAN1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			flexcan2: can@30a10000 {
+				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x30a10000 0x10000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CAN2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c1: i2c@30a20000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART4_ROOT_CLK>,
+					<&clks IMX7D_UART4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart5: serial@30a70000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a70000 0x10000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART5_ROOT_CLK>,
+					<&clks IMX7D_UART5_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart6: serial@30a80000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a80000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART6_ROOT_CLK>,
+					<&clks IMX7D_UART6_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart7: serial@30a90000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a90000 0x10000>;
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART7_ROOT_CLK>,
+					<&clks IMX7D_UART7_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			usbotg1: usb@30b10000 {
+				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x30b10000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_USB_CTRL_CLK>;
+				fsl,usbphy = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				phy-clkgate-delay-us = <400>;
+				status = "disabled";
+			};
+
+			usbh: usb@30b30000 {
+				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x30b30000 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_USB_CTRL_CLK>;
+				fsl,usbphy = <&usbphynop3>;
+				fsl,usbmisc = <&usbmisc3 0>;
+				phy_type = "hsic";
+				dr_mode = "host";
+				phy-clkgate-delay-us = <400>;
+				status = "disabled";
+			};
+
+			usbmisc1: usbmisc@30b10200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x30b10200 0x200>;
+			};
+
+			usbmisc3: usbmisc@30b30200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x30b30200 0x200>;
+			};
+
+			usbphynop1: usbphynop1 {
+				compatible = "usb-nop-xceiv";
+				clocks = <&clks IMX7D_USB_PHY1_CLK>;
+				clock-names = "main_clk";
+			};
+
+			usbphynop3: usbphynop3 {
+				compatible = "usb-nop-xceiv";
+				clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
+				clock-names = "main_clk";
+			};
+
+			usdhc1: usdhc@30b40000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_USDHC1_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@30b50000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_USDHC2_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: usdhc@30b60000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_USDHC3_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "ptp",
+					"enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<3>;
+				fsl,num-rx-queues=<3>;
+				status = "disabled";
+			};
+		};
+	};
+};