diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 2364fc5..033fa63 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -155,20 +155,6 @@
 				status = "okay";
 			};
 
-			spi0: spi@10600 {
-				pinctrl-0 = <&spi0_pins2>;
-				pinctrl-names = "default";
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "mx25l25635e", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <50000000>;
-				};
-			};
-
 			nand@d0000 {
 				status = "okay";
 				num-cs = <1>;
@@ -274,3 +260,18 @@
 		compatible = "linux,spdif-dir";
 	};
 };
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mx25l25635e", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index 1aba08e..01cded3 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -68,26 +68,6 @@
 				phy-mode = "rgmii-id";
 			};
 
-			spi@10600 {
-				status = "okay";
-				pinctrl-0 = <&spi0_pins2>;
-				pinctrl-names = "default";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					/* MX25L8006E */
-					compatible = "mxicy,mx25l8005", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <50000000>;
-
-					partition@0 {
-						label = "u-boot";
-						reg = <0x0 0x100000>;
-					};
-				};
-			};
-
 			usb@50000 {
 				status = "okay";
 			};
@@ -176,3 +156,23 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/* MX25L8006E */
+		compatible = "mxicy,mx25l8005", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index 8ca7a43..a9cc427 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -87,62 +87,6 @@
 				status = "disabled";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "micron,n25q064", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
-
-					/*
-					 * Warning!
-					 *
-					 * Synology u-boot uses its compiled-in environment
-					 * and it seems Synology did not care to change u-boot
-					 * default configuration in order to allow saving a
-					 * modified environment at a sensible location. So,
-					 * if you do a 'saveenv' under u-boot, your modified
-					 * environment will be saved at 1MB after the start
-					 * of the flash, i.e. in the middle of the uImage.
-					 * For that reason, it is strongly advised not to
-					 * change the default environment, unless you know
-					 * what you are doing.
-					 */
-					partition@00000000 { /* u-boot */
-						label = "RedBoot";
-						reg = <0x00000000 0x000c0000>; /* 768KB */
-					};
-
-					partition@000c0000 { /* uImage */
-						label = "zImage";
-						reg = <0x000c0000 0x002d0000>; /* 2880KB */
-					};
-
-					partition@00390000 { /* uInitramfs */
-						label = "rd.gz";
-						reg = <0x00390000 0x00440000>; /* 4250KB */
-					};
-
-					partition@007d0000 { /* MAC address and serial number */
-						label = "vendor";
-						reg = <0x007d0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007e0000 {
-						label = "RedBoot config";
-						reg = <0x007e0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007f0000 {
-						label = "FIS directory";
-						reg = <0x007f0000 0x00010000>; /* 64KB */
-					};
-				};
-			};
-
 			i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				pinctrl-0 = <&i2c0_pins>;
@@ -347,3 +291,59 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+
+		/*
+		 * Warning!
+		 *
+		 * Synology u-boot uses its compiled-in environment
+		 * and it seems Synology did not care to change u-boot
+		 * default configuration in order to allow saving a
+		 * modified environment at a sensible location. So,
+		 * if you do a 'saveenv' under u-boot, your modified
+		 * environment will be saved at 1MB after the start
+		 * of the flash, i.e. in the middle of the uImage.
+		 * For that reason, it is strongly advised not to
+		 * change the default environment, unless you know
+		 * what you are doing.
+		 */
+		partition@00000000 { /* u-boot */
+			label = "RedBoot";
+			reg = <0x00000000 0x000c0000>; /* 768KB */
+		};
+
+		partition@000c0000 { /* uImage */
+			label = "zImage";
+			reg = <0x000c0000 0x002d0000>; /* 2880KB */
+		};
+
+		partition@00390000 { /* uInitramfs */
+			label = "rd.gz";
+			reg = <0x00390000 0x00440000>; /* 4250KB */
+		};
+
+		partition@007d0000 { /* MAC address and serial number */
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>; /* 64KB */
+		};
+
+		partition@007e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>; /* 64KB */
+		};
+
+		partition@007f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>; /* 64KB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index a718866..a0903cd 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -148,26 +148,6 @@
 				interrupts = <50>;
 			};
 
-			spi0: spi@10600 {
-				reg = <0x10600 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <30>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				reg = <0x10680 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <92>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				#address-cells = <1>;
@@ -320,6 +300,26 @@
 				status = "disabled";
 			};
 		};
+
+		spi0: spi@10600 {
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <30>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x28>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <92>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 3b06aa8..b425810 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -134,24 +134,6 @@
 				wt-override;
 			};
 
-			/*
-			 * Default SPI pinctrl setting, can be overwritten on
-			 * board level if a different configuration is used.
-			 */
-			spi0: spi@10600 {
-				compatible = "marvell,armada-370-spi",
-						"marvell,orion-spi";
-				pinctrl-0 = <&spi0_pins1>;
-				pinctrl-names = "default";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-370-spi",
-						"marvell,orion-spi";
-				pinctrl-0 = <&spi1_pins>;
-				pinctrl-names = "default";
-			};
-
 			i2c0: i2c@11000 {
 				reg = <0x11000 0x20>;
 			};
@@ -447,3 +429,19 @@
 		marvell,function = "ge1";
 	};
 };
+
+/*
+ * Default SPI pinctrl setting, can be overwritten on
+ * board level if a different configuration is used.
+ */
+&spi0 {
+	compatible = "marvell,armada-370-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins1>;
+	pinctrl-names = "default";
+};
+
+&spi1 {
+	compatible = "marvell,armada-370-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index 2d3fd6e..ca38200 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -65,20 +65,6 @@
 			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
-			spi1: spi@10680 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi1_pins>;
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <54000000>;
-				};
-			};
-
 			i2c0: i2c@11000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins>;
@@ -239,3 +225,17 @@
 		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <54000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index 8450944..9aa2d77 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -62,11 +62,6 @@
 			  MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
 
 		internal-regs {
-
-			spi@10600 {
-				status = "disabled";
-			};
-
 			i2c@11000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins>;
@@ -332,3 +327,7 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index c60206e..fbeaebb 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -331,30 +331,6 @@
 				status = "okay";
 			};
 
-			spi@10680 {
-				/*
-				 * We don't seem to have the W25Q32 on the
-				 * A1 Rev 2.0 boards, so disable SPI.
-				 * CS0: W25Q32 (doesn't appear to be present)
-				 * CS1:
-				 * CS2: mikrobus
-				 */
-				pinctrl-0 = <&spi1_pins
-					     &clearfog_spi1_cs_pins
-					     &mikro_spi_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "w25q32", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <3000000>;
-					status = "disabled";
-				};
-			};
-
 			usb@58000 {
 				/* CON3, nearest  power. */
 				status = "okay";
@@ -460,3 +436,27 @@
 		};
 	};
 };
+
+&spi1 {
+	/*
+	 * We don't seem to have the W25Q32 on the
+	 * A1 Rev 2.0 boards, so disable SPI.
+	 * CS0: W25Q32 (doesn't appear to be present)
+	 * CS1:
+	 * CS2: mikrobus
+	 */
+	pinctrl-0 = <&spi1_pins
+		     &clearfog_spi1_cs_pins
+		     &mikro_spi_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index ea93ed7..de26c76 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -70,18 +70,6 @@
 			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
-			spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "w25q32", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
 			i2c@11000 {
 				status = "okay";
 				clock-frequency = <100000>;
@@ -201,3 +189,16 @@
 		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index fd75e5e9..895fa6c 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -64,21 +64,6 @@
 			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
-			spi@10600 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi0_pins>;
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <50000000>;
-					m25p,fast-read;
-				};
-			};
-
 			i2c@11000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins>;
@@ -433,3 +418,18 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts
index 853f973..dd3462dd 100644
--- a/arch/arm/boot/dts/armada-388-rd.dts
+++ b/arch/arm/boot/dts/armada-388-rd.dts
@@ -70,18 +70,6 @@
 			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
 
 		internal-regs {
-			spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
 			i2c@11000 {
 				status = "okay";
 				clock-frequency = <100000>;
@@ -142,3 +130,16 @@
 		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 3312be6..c065ecd 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -170,30 +170,6 @@
 				      <0xc100 0x100>;
 			};
 
-			spi0: spi@10600 {
-				compatible = "marvell,armada-380-spi",
-						"marvell,orion-spi";
-				reg = <0x10600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-380-spi",
-						"marvell,orion-spi";
-				reg = <0x10680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
@@ -649,6 +625,30 @@
 			no-memory-wc;
 			status = "disabled";
 		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,armada-380-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			compatible = "marvell,armada-380-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts
index 788c3ba..c5f14a7 100644
--- a/arch/arm/boot/dts/armada-398-db.dts
+++ b/arch/arm/boot/dts/armada-398-db.dts
@@ -65,30 +65,6 @@
 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
 
 		internal-regs {
-			spi@10680 {
-				status = "okay";
-				pinctrl-0 = <&spi1_pins>;
-				pinctrl-names = "default";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>;
-					spi-max-frequency = <108000000>;
-
-					partition@0 {
-						label = "U-Boot";
-						reg = <0 0x400000>;
-					};
-
-					partition@400000 {
-						label = "Filesystem";
-						reg = <0x400000 0x1000000>;
-					};
-				};
-			};
-
 			i2c@11000 {
 				pinctrl-0 = <&i2c0_pins>;
 				pinctrl-names = "default";
@@ -151,3 +127,27 @@
 		};
 	};
 };
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0 0x400000>;
+		};
+
+		partition@400000 {
+			label = "Filesystem";
+			reg = <0x400000 0x1000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index dc6efd3..251a2b6 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -131,30 +131,6 @@
 				      <0xc100 0x100>;
 			};
 
-			spi0: spi@10600 {
-				compatible = "marvell,armada-390-spi",
-						"marvell,orion-spi";
-				reg = <0x10600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-390-spi",
-						"marvell,orion-spi";
-				reg = <0x10680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
@@ -501,6 +477,30 @@
 				status = "disabled";
 			};
 		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,armada-390-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			compatible = "marvell,armada-390-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 5c21b23..ce15271 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -135,18 +135,6 @@
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
 			};
-
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
 		};
 	};
 
@@ -179,3 +167,15 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 62422a9..075120b 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -231,18 +231,6 @@
 				status = "okay";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "m25p64", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
-				};
-			};
-
 			nand@d0000 {
 				status = "okay";
 				num-cs = <1>;
@@ -277,3 +265,15 @@
 		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p64", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 061f423..190e4ec 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -232,18 +232,6 @@
 				status = "okay";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
 			bm@c0000 {
 				status = "okay";
 			};
@@ -262,3 +250,15 @@
 		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 7a46154..076f27f 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -279,18 +279,6 @@
 					reg = <0x180000 0x780000>;   /* 7.5MB */
 				};
 			};
-
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "everspin,mr25h256";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <40000000>;
-				};
-			};
 		};
 	};
 
@@ -398,3 +386,15 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "everspin,mr25h256";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index d17dab0..ae28673 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -110,62 +110,6 @@
 				status = "disabled";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "micron,n25q064", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
-
-					/*
-					 * Warning!
-					 *
-					 * Synology u-boot uses its compiled-in environment
-					 * and it seems Synology did not care to change u-boot
-					 * default configuration in order to allow saving a
-					 * modified environment at a sensible location. So,
-					 * if you do a 'saveenv' under u-boot, your modified
-					 * environment will be saved at 1MB after the start
-					 * of the flash, i.e. in the middle of the uImage.
-					 * For that reason, it is strongly advised not to
-					 * change the default environment, unless you know
-					 * what you are doing.
-					 */
-					partition@00000000 { /* u-boot */
-						label = "RedBoot";
-						reg = <0x00000000 0x000d0000>; /* 832KB */
-					};
-
-					partition@000c0000 { /* uImage */
-						label = "zImage";
-						reg = <0x000d0000 0x002d0000>; /* 2880KB */
-					};
-
-					partition@003a0000 { /* uInitramfs */
-						label = "rd.gz";
-						reg = <0x003a0000 0x00430000>; /* 4250KB */
-					};
-
-					partition@007d0000 { /* MAC address and serial number */
-						label = "vendor";
-						reg = <0x007d0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007e0000 {
-						label = "RedBoot config";
-						reg = <0x007e0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007f0000 {
-						label = "FIS directory";
-						reg = <0x007f0000 0x00010000>; /* 64KB */
-					};
-				};
-			};
-
 			i2c@11000 {
 				clock-frequency = <400000>;
 				status = "okay";
@@ -362,3 +306,59 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+
+		/*
+		 * Warning!
+		 *
+		 * Synology u-boot uses its compiled-in environment
+		 * and it seems Synology did not care to change u-boot
+		 * default configuration in order to allow saving a
+		 * modified environment at a sensible location. So,
+		 * if you do a 'saveenv' under u-boot, your modified
+		 * environment will be saved at 1MB after the start
+		 * of the flash, i.e. in the middle of the uImage.
+		 * For that reason, it is strongly advised not to
+		 * change the default environment, unless you know
+		 * what you are doing.
+		 */
+		partition@00000000 { /* u-boot */
+			label = "RedBoot";
+			reg = <0x00000000 0x000d0000>; /* 832KB */
+		};
+
+		partition@000c0000 { /* uImage */
+			label = "zImage";
+			reg = <0x000d0000 0x002d0000>; /* 2880KB */
+		};
+
+		partition@003a0000 { /* uInitramfs */
+			label = "rd.gz";
+			reg = <0x003a0000 0x00430000>; /* 4250KB */
+		};
+
+		partition@007d0000 { /* MAC address and serial number */
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>; /* 64KB */
+		};
+
+		partition@007e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>; /* 64KB */
+		};
+
+		partition@007f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>; /* 64KB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 4033790..4a5f99e 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -84,21 +84,6 @@
 				wt-override;
 			};
 
-			spi0: spi@10600 {
-				compatible = "marvell,armada-xp-spi",
-						"marvell,orion-spi";
-				pinctrl-0 = <&spi0_pins>;
-				pinctrl-names = "default";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-xp-spi",
-						"marvell,orion-spi";
-				pinctrl-0 = <&spi1_pins>;
-				pinctrl-names = "default";
-			};
-
-
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x100>;
@@ -380,3 +365,15 @@
 		marvell,function = "uart3";
 	};
 };
+
+&spi0 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+};
+
+&spi1 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+};
