diff mbox

[v4,5/6] dmaengine: pl330: Make sure microcode is privileged

Message ID 20160725191649.13414-6-mitchelh@codeaurora.org (mailing list archive)
State New, archived
Headers show

Commit Message

Mitchel Humpherys July 25, 2016, 7:16 p.m. UTC 
The PL330 performs privileged instruction fetches.  This can result in
SMMU permission faults on SMMUs that implement the ARMv8 VMSA, which
specifies that mappings that are writeable at one execution level shall
not be executable at any higher-privileged level.  Fix this by using the
DMA_ATTR_PRIVILEGED attribute, which will ensure that the microcode
IOMMU mapping is only accessible to the privileged level.

Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
---

Notes:
    v3..v4
    
      - Reworked against the new dma attrs format.

 drivers/dma/pl330.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 4fc3ffbd5ca0..8cd624fc3760 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -1854,14 +1854,16 @@  static int dmac_alloc_resources(struct pl330_dmac *pl330)
 {
 	int chans = pl330->pcfg.num_chan;
 	int ret;
+	unsigned long dma_attrs = DMA_ATTR_PRIVILEGED;
 
 	/*
 	 * Alloc MicroCode buffer for 'chans' Channel threads.
 	 * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
 	 */
-	pl330->mcode_cpu = dma_alloc_coherent(pl330->ddma.dev,
+	pl330->mcode_cpu = dma_alloc_attrs(pl330->ddma.dev,
 				chans * pl330->mcbufsz,
-				&pl330->mcode_bus, GFP_KERNEL);
+				&pl330->mcode_bus, GFP_KERNEL,
+				dma_attrs);
 	if (!pl330->mcode_cpu) {
 		dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n",
 			__func__, __LINE__);