| Message ID | 20160907213519.27340-11-stephen.boyd@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Sep 07, 2016 at 02:35:07PM -0700, Stephen Boyd wrote: > The two extcon notifiers are almost the same except for the > variable name for the cable structure and the id notifier inverts > the cable->state logic. Make it the same and replace two > functions with one to save some lines. This also makes it so that > the id cable state is true when the id pin is pulled low, so we > change the name of ->state to ->connected to properly reflect > that we're interested in the cable being connected. > > Cc: Peter Chen <peter.chen@nxp.com> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: "Ivan T. Ivanov" <iivanov.xz@gmail.com> > Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> > --- > drivers/usb/chipidea/core.c | 45 ++++++++++++-------------------------------- > drivers/usb/chipidea/otg.c | 8 ++++---- > include/linux/usb/chipidea.h | 4 ++-- > 3 files changed, 18 insertions(+), 39 deletions(-) > > diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c > index f144e1bbcc82..83bc2f2dd6a8 100644 > --- a/drivers/usb/chipidea/core.c > +++ b/drivers/usb/chipidea/core.c > @@ -577,35 +577,14 @@ static irqreturn_t ci_irq(int irq, void *data) > return ret; > } > > -static int ci_vbus_notifier(struct notifier_block *nb, unsigned long event, > - void *ptr) > +static int ci_cable_notifier(struct notifier_block *nb, unsigned long event, > + void *ptr) > { > - struct ci_hdrc_cable *vbus = container_of(nb, struct ci_hdrc_cable, nb); > - struct ci_hdrc *ci = vbus->ci; > + struct ci_hdrc_cable *cbl = container_of(nb, struct ci_hdrc_cable, nb); > + struct ci_hdrc *ci = cbl->ci; > > - if (event) > - vbus->state = true; > - else > - vbus->state = false; > - > - vbus->changed = true; > - > - ci_irq(ci->irq, ci); > - return NOTIFY_DONE; > -} > - > -static int ci_id_notifier(struct notifier_block *nb, unsigned long event, > - void *ptr) > -{ > - struct ci_hdrc_cable *id = container_of(nb, struct ci_hdrc_cable, nb); > - struct ci_hdrc *ci = id->ci; > - > - if (event) > - id->state = false; > - else > - id->state = true; > - > - id->changed = true; > + cbl->connected = event; > + cbl->changed = true; > > ci_irq(ci->irq, ci); > return NOTIFY_DONE; > @@ -714,27 +693,27 @@ static int ci_get_platdata(struct device *dev, > } > > cable = &platdata->vbus_extcon; > - cable->nb.notifier_call = ci_vbus_notifier; > + cable->nb.notifier_call = ci_cable_notifier; > cable->edev = ext_vbus; > > if (!IS_ERR(ext_vbus)) { > ret = extcon_get_cable_state_(cable->edev, EXTCON_USB); > if (ret) > - cable->state = true; > + cable->connected = true; > else > - cable->state = false; > + cable->connected = false; > } > > cable = &platdata->id_extcon; > - cable->nb.notifier_call = ci_id_notifier; > + cable->nb.notifier_call = ci_cable_notifier; > cable->edev = ext_id; > > if (!IS_ERR(ext_id)) { > ret = extcon_get_cable_state_(cable->edev, EXTCON_USB_HOST); > if (ret) > - cable->state = false; > + cable->connected = true; > else > - cable->state = true; > + cable->connected = false; > } > return 0; > } > diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c > index 0cf149edddd8..695f3fe3ae21 100644 > --- a/drivers/usb/chipidea/otg.c > +++ b/drivers/usb/chipidea/otg.c > @@ -44,7 +44,7 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask) > else > val &= ~OTGSC_BSVIS; > > - if (cable->state) > + if (cable->connected) > val |= OTGSC_BSV; > else > val &= ~OTGSC_BSV; > @@ -62,10 +62,10 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask) > else > val &= ~OTGSC_IDIS; > > - if (cable->state) > - val |= OTGSC_ID; > + if (cable->connected) > + val &= ~OTGSC_ID; /* host */ > else > - val &= ~OTGSC_ID; > + val |= OTGSC_ID; /* device */ > > if (cable->enabled) > val |= OTGSC_IDIE; > diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h > index d07b162073f7..7e3daa37cf60 100644 > --- a/include/linux/usb/chipidea.h > +++ b/include/linux/usb/chipidea.h > @@ -12,7 +12,7 @@ struct ci_hdrc; > > /** > * struct ci_hdrc_cable - structure for external connector cable state tracking > - * @state: current state of the line > + * @connected: true if cable is connected, false otherwise > * @changed: set to true when extcon event happen > * @enabled: set to true if we've enabled the vbus or id interrupt > * @edev: device which generate events > @@ -21,7 +21,7 @@ struct ci_hdrc; > * @conn: used for notification registration > */ > struct ci_hdrc_cable { > - bool state; > + bool connected; > bool changed; > bool enabled; > struct extcon_dev *edev; > -- Acked-by: Peter Chen <peter.chen@nxp.com>
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index f144e1bbcc82..83bc2f2dd6a8 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -577,35 +577,14 @@ static irqreturn_t ci_irq(int irq, void *data) return ret; } -static int ci_vbus_notifier(struct notifier_block *nb, unsigned long event, - void *ptr) +static int ci_cable_notifier(struct notifier_block *nb, unsigned long event, + void *ptr) { - struct ci_hdrc_cable *vbus = container_of(nb, struct ci_hdrc_cable, nb); - struct ci_hdrc *ci = vbus->ci; + struct ci_hdrc_cable *cbl = container_of(nb, struct ci_hdrc_cable, nb); + struct ci_hdrc *ci = cbl->ci; - if (event) - vbus->state = true; - else - vbus->state = false; - - vbus->changed = true; - - ci_irq(ci->irq, ci); - return NOTIFY_DONE; -} - -static int ci_id_notifier(struct notifier_block *nb, unsigned long event, - void *ptr) -{ - struct ci_hdrc_cable *id = container_of(nb, struct ci_hdrc_cable, nb); - struct ci_hdrc *ci = id->ci; - - if (event) - id->state = false; - else - id->state = true; - - id->changed = true; + cbl->connected = event; + cbl->changed = true; ci_irq(ci->irq, ci); return NOTIFY_DONE; @@ -714,27 +693,27 @@ static int ci_get_platdata(struct device *dev, } cable = &platdata->vbus_extcon; - cable->nb.notifier_call = ci_vbus_notifier; + cable->nb.notifier_call = ci_cable_notifier; cable->edev = ext_vbus; if (!IS_ERR(ext_vbus)) { ret = extcon_get_cable_state_(cable->edev, EXTCON_USB); if (ret) - cable->state = true; + cable->connected = true; else - cable->state = false; + cable->connected = false; } cable = &platdata->id_extcon; - cable->nb.notifier_call = ci_id_notifier; + cable->nb.notifier_call = ci_cable_notifier; cable->edev = ext_id; if (!IS_ERR(ext_id)) { ret = extcon_get_cable_state_(cable->edev, EXTCON_USB_HOST); if (ret) - cable->state = false; + cable->connected = true; else - cable->state = true; + cable->connected = false; } return 0; } diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c index 0cf149edddd8..695f3fe3ae21 100644 --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -44,7 +44,7 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask) else val &= ~OTGSC_BSVIS; - if (cable->state) + if (cable->connected) val |= OTGSC_BSV; else val &= ~OTGSC_BSV; @@ -62,10 +62,10 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask) else val &= ~OTGSC_IDIS; - if (cable->state) - val |= OTGSC_ID; + if (cable->connected) + val &= ~OTGSC_ID; /* host */ else - val &= ~OTGSC_ID; + val |= OTGSC_ID; /* device */ if (cable->enabled) val |= OTGSC_IDIE; diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index d07b162073f7..7e3daa37cf60 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -12,7 +12,7 @@ struct ci_hdrc; /** * struct ci_hdrc_cable - structure for external connector cable state tracking - * @state: current state of the line + * @connected: true if cable is connected, false otherwise * @changed: set to true when extcon event happen * @enabled: set to true if we've enabled the vbus or id interrupt * @edev: device which generate events @@ -21,7 +21,7 @@ struct ci_hdrc; * @conn: used for notification registration */ struct ci_hdrc_cable { - bool state; + bool connected; bool changed; bool enabled; struct extcon_dev *edev;
The two extcon notifiers are almost the same except for the variable name for the cable structure and the id notifier inverts the cable->state logic. Make it the same and replace two functions with one to save some lines. This also makes it so that the id cable state is true when the id pin is pulled low, so we change the name of ->state to ->connected to properly reflect that we're interested in the cable being connected. Cc: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Ivan T. Ivanov" <iivanov.xz@gmail.com> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> --- drivers/usb/chipidea/core.c | 45 ++++++++++++-------------------------------- drivers/usb/chipidea/otg.c | 8 ++++---- include/linux/usb/chipidea.h | 4 ++-- 3 files changed, 18 insertions(+), 39 deletions(-)