| Message ID | 20161004125607.10569-3-mugunthanvnm@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tuesday 04 October 2016 06:26 PM, Mugunthan V N wrote: > Add support for programmable MAC impedance configuration > > Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> > --- > drivers/net/phy/dp83867.c | 28 ++++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > > diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c > index 91177a4..795ae17 100644 > --- a/drivers/net/phy/dp83867.c > +++ b/drivers/net/phy/dp83867.c > @@ -33,6 +33,7 @@ > /* Extended Registers */ > #define DP83867_RGMIICTL 0x0032 > #define DP83867_RGMIIDCTL 0x0086 > +#define DP83867_IO_MUX_CFG 0x0170 > > #define DP83867_SW_RESET BIT(15) > #define DP83867_SW_RESTART BIT(14) > @@ -62,10 +63,17 @@ > /* RGMIIDCTL bits */ > #define DP83867_RGMII_TX_CLK_DELAY_SHIFT 4 > > +/* IO_MUX_CFG bits */ > +#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL 0x1f > + > +#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0 > +#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN 0x1f > + > struct dp83867_private { > int rx_id_delay; > int tx_id_delay; > int fifo_depth; > + int io_impedance; > }; > > static int dp83867_ack_interrupt(struct phy_device *phydev) > @@ -111,6 +119,14 @@ static int dp83867_of_init(struct phy_device *phydev) > if (!of_node) > return -ENODEV; > > + dp83867->io_impedance = -EINVAL; > + > + /* Optional configuration */ > + if (of_property_read_bool(of_node, "ti,max-output-imepdance")) s/imepdance/impedance > + dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX; > + else if (of_property_read_bool(of_node, "ti,min-output-imepdance")) s/imepdance/impedance Thanks and regards, Lokesh > + dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN; > + > ret = of_property_read_u32(of_node, "ti,rx-internal-delay", > &dp83867->rx_id_delay); > if (ret) > @@ -184,6 +200,18 @@ static int dp83867_config_init(struct phy_device *phydev) > > phy_write_mmd_indirect(phydev, DP83867_RGMIIDCTL, > DP83867_DEVADDR, delay); > + > + if (dp83867->io_impedance >= 0) { > + val = phy_read_mmd_indirect(phydev, DP83867_IO_MUX_CFG, > + DP83867_DEVADDR); > + > + val &= ~DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL; > + val |= dp83867->io_impedance & > + DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL; > + > + phy_write_mmd_indirect(phydev, DP83867_IO_MUX_CFG, > + DP83867_DEVADDR, val); > + } > } > > return 0; >
> + if (of_property_read_bool(of_node, "ti,max-output-imepdance")) > + dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX; > + else if (of_property_read_bool(of_node, "ti,min-output-imepdance")) Did you really test this? Or did you make the same typos in your device tree file? Andrew
On Tuesday 04 October 2016 06:40 PM, Andrew Lunn wrote: >> + if (of_property_read_bool(of_node, "ti,max-output-imepdance")) >> + dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX; >> + else if (of_property_read_bool(of_node, "ti,min-output-imepdance")) > > Did you really test this? Or did you make the same typos in your device > tree file? > I have tested this and attached the log in cover letter. Since there is a typo error on both dts and driver it worked as expected. Will send a v3 ASAP. Regards Mugunthan V N
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 91177a4..795ae17 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -33,6 +33,7 @@ /* Extended Registers */ #define DP83867_RGMIICTL 0x0032 #define DP83867_RGMIIDCTL 0x0086 +#define DP83867_IO_MUX_CFG 0x0170 #define DP83867_SW_RESET BIT(15) #define DP83867_SW_RESTART BIT(14) @@ -62,10 +63,17 @@ /* RGMIIDCTL bits */ #define DP83867_RGMII_TX_CLK_DELAY_SHIFT 4 +/* IO_MUX_CFG bits */ +#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL 0x1f + +#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0 +#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN 0x1f + struct dp83867_private { int rx_id_delay; int tx_id_delay; int fifo_depth; + int io_impedance; }; static int dp83867_ack_interrupt(struct phy_device *phydev) @@ -111,6 +119,14 @@ static int dp83867_of_init(struct phy_device *phydev) if (!of_node) return -ENODEV; + dp83867->io_impedance = -EINVAL; + + /* Optional configuration */ + if (of_property_read_bool(of_node, "ti,max-output-imepdance")) + dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX; + else if (of_property_read_bool(of_node, "ti,min-output-imepdance")) + dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN; + ret = of_property_read_u32(of_node, "ti,rx-internal-delay", &dp83867->rx_id_delay); if (ret) @@ -184,6 +200,18 @@ static int dp83867_config_init(struct phy_device *phydev) phy_write_mmd_indirect(phydev, DP83867_RGMIIDCTL, DP83867_DEVADDR, delay); + + if (dp83867->io_impedance >= 0) { + val = phy_read_mmd_indirect(phydev, DP83867_IO_MUX_CFG, + DP83867_DEVADDR); + + val &= ~DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL; + val |= dp83867->io_impedance & + DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL; + + phy_write_mmd_indirect(phydev, DP83867_IO_MUX_CFG, + DP83867_DEVADDR, val); + } } return 0;
Add support for programmable MAC impedance configuration Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> --- drivers/net/phy/dp83867.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)