@@ -97,15 +97,6 @@
};
};
- bt_rfkill {
- compatible = "rfkill-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_bt_rfkill>;
- gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
- name = "bt_rfkill";
- type = <2>;
- };
-
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
@@ -160,7 +151,7 @@
};
};
- backlight_lcd {
+ backlight-lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -169,7 +160,7 @@
status = "okay";
};
- backlight_lvds0: backlight_lvds0 {
+ backlight_lvds0: backlight-lvds0 {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -178,7 +169,7 @@
status = "okay";
};
- panel_lvds0 {
+ panel-lvds0 {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds0>;
@@ -328,19 +319,6 @@
>;
};
- pinctrl_bt_rfkill: bt_rfkillgrp {
- fsl,pins = <
- /* BT wake */
- MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
- /* BT reset */
- MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b0
- /* BT reg en */
- MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
- /* BT host wake irq */
- MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x100b0
- >;
- };
-
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
@@ -374,7 +352,7 @@
>;
};
- pinctrl_gpio_keys: gpio_keysgrp {
+ pinctrl_gpio_keys: gpio-keysgrp {
fsl,pins = <
/* Home Button: J14 pin 5 */
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
@@ -457,7 +435,7 @@
>;
};
- pinctrl_wlan_vmmc: wlan_vmmcgrp {
+ pinctrl_wlan_vmmc: wlan-vmmcgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0
>;
Therefore aligning the panel nodes name across all platforms. Also removing the bt_rfkill node since the mainline rfkill-gpio driver doesn't support device trees. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> --- arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 32 +++++--------------------------- 1 file changed, 5 insertions(+), 27 deletions(-)