| Message ID | 20161108022830.29303-1-dinguyen@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Nov 07, 2016 at 08:28:30PM -0600, Dinh Nguyen wrote: > From: Dinh Nguyen <dinguyen@opensource.altera.com> > > Enable the QSPI node and add the flash chip. > > Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> > --- > v3: Use n25q00 for the compatible entry for the flash part and > tested on SoCKit > v2: Remove partition entries for the SoCKIT > --- > arch/arm/boot/dts/socfpga_cyclone5_sockit.dts | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > > diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts > index 02e22f5..d59f6f2 100644 > --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts > +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts > @@ -175,6 +175,27 @@ > status = "okay"; > }; > > +&qspi { > + status = "okay"; > + > + flash: flash@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "n25q00"; > + reg = <0>; > + spi-max-frequency = <100000000>; > + > + m25p,fast-read; > + cdns,page-size = <256>; > + cdns,block-size = <16>; > + cdns,read-delay = <4>; > + cdns,tshsl-ns = <50>; > + cdns,tsd2d-ns = <50>; > + cdns,tchsh-ns = <4>; > + cdns,tslch-ns = <4>; > + }; > +}; > + > &usb1 { > status = "okay"; > }; Looks good to me. Thanks, Steffen
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index 02e22f5..d59f6f2 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -175,6 +175,27 @@ status = "okay"; }; +&qspi { + status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q00"; + reg = <0>; + spi-max-frequency = <100000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + }; +}; + &usb1 { status = "okay"; };