@@ -73,28 +73,6 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
- pcie-controller {
- status = "okay";
-
- /* First mini-PCIe port */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /* Second mini-PCIe port */
- pcie@2,0 {
- /* Port 0, Lane 1 */
- status = "okay";
- };
-
- /* Renesas uPD720202 USB 3.0 controller */
- pcie@3,0 {
- /* Port 0, Lane 3 */
- status = "okay";
- };
- };
-
internal-regs {
/* UART0 */
serial@12000 {
@@ -153,6 +131,28 @@
};
};
+&pciec {
+ status = "okay";
+
+ /* First mini-PCIe port */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* Second mini-PCIe port */
+ pcie@2,0 {
+ /* Port 0, Lane 1 */
+ status = "okay";
+ };
+
+ /* Renesas uPD720202 USB 3.0 controller */
+ pcie@3,0 {
+ /* Port 0, Lane 3 */
+ status = "okay";
+ };
+};
+
&pinctrl {
pinctrl-0 = <&phy_int_pin>;
pinctrl-names = "default";
@@ -80,39 +80,6 @@
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
- pcie-controller {
- status = "okay";
-
- /*
- * All 6 slots are physically present as
- * standard PCIe slots on the board.
- */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- pcie@2,0 {
- /* Port 0, Lane 1 */
- status = "okay";
- };
- pcie@3,0 {
- /* Port 0, Lane 2 */
- status = "okay";
- };
- pcie@4,0 {
- /* Port 0, Lane 3 */
- status = "okay";
- };
- pcie@9,0 {
- /* Port 2, Lane 0 */
- status = "okay";
- };
- pcie@10,0 {
- /* Port 3, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
serial@12000 {
status = "okay";
@@ -244,6 +211,39 @@
};
};
+&pciec {
+ status = "okay";
+
+ /*
+ * All 6 slots are physically present as
+ * standard PCIe slots on the board.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ pcie@2,0 {
+ /* Port 0, Lane 1 */
+ status = "okay";
+ };
+ pcie@3,0 {
+ /* Port 0, Lane 2 */
+ status = "okay";
+ };
+ pcie@4,0 {
+ /* Port 0, Lane 3 */
+ status = "okay";
+ };
+ pcie@9,0 {
+ /* Port 2, Lane 0 */
+ status = "okay";
+ };
+ pcie@10,0 {
+ /* Port 3, Lane 0 */
+ status = "okay";
+ };
+};
+
&bm_bppi {
status = "okay";
};
@@ -99,27 +99,6 @@
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
- pcie-controller {
- status = "okay";
-
- /*
- * The 3 slots are physically present as
- * standard PCIe slots on the board.
- */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- pcie@9,0 {
- /* Port 2, Lane 0 */
- status = "okay";
- };
- pcie@10,0 {
- /* Port 3, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
serial@12000 {
status = "okay";
@@ -229,6 +208,27 @@
};
};
+&pciec {
+ status = "okay";
+
+ /*
+ * The 3 slots are physically present as
+ * standard PCIe slots on the board.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ pcie@9,0 {
+ /* Port 2, Lane 0 */
+ status = "okay";
+ };
+ pcie@10,0 {
+ /* Port 3, Lane 0 */
+ status = "okay";
+ };
+};
+
&bm_bppi {
status = "okay";
};
@@ -68,22 +68,6 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
- pcie-controller {
- status = "okay";
-
- /* Quad port sata: Marvell 88SX7042 */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /* USB 3.0 xHCI controller: NEC D720200F1 */
- pcie@5,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
serial@12000 {
status = "okay";
@@ -285,6 +269,21 @@
gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
};
};
+&pciec {
+ status = "okay";
+
+ /* Quad port sata: Marvell 88SX7042 */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* USB 3.0 xHCI controller: NEC D720200F1 */
+ pcie@5,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+};
&mdio {
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
@@ -73,28 +73,6 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
- pcie-controller {
- status = "okay";
-
- /* Etron EJ168 USB 3.0 controller */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /* First mini-PCIe port */
- pcie@2,0 {
- /* Port 0, Lane 1 */
- status = "okay";
- };
-
- /* Second mini-PCIe port */
- pcie@3,0 {
- /* Port 0, Lane 3 */
- status = "okay";
- };
- };
-
internal-regs {
rtc@10300 {
@@ -369,6 +347,28 @@
};
};
+&pciec {
+ status = "okay";
+
+ /* Etron EJ168 USB 3.0 controller */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* First mini-PCIe port */
+ pcie@2,0 {
+ /* Port 0, Lane 1 */
+ status = "okay";
+ };
+
+ /* Second mini-PCIe port */
+ pcie@3,0 {
+ /* Port 0, Lane 3 */
+ status = "okay";
+ };
+};
+
&pinctrl {
keys_pin: keys-pin {
@@ -71,15 +71,6 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
serial@12000 {
status = "okay";
@@ -114,3 +105,12 @@
};
};
};
+
+&pciec {
+ status = "okay";
+
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+};
@@ -86,7 +86,7 @@
* configured as x4 or quad x1 lanes. One unit is
* x1 only.
*/
- pciec: pcie-controller {
+ pciec: pcie-controller@82000000 {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
@@ -87,7 +87,7 @@
* configured as x4 or quad x1 lanes. One unit is
* x4 only.
*/
- pciec: pcie-controller {
+ pciec: pcie-controller@82000000 {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
@@ -104,7 +104,7 @@
* configured as x4 or quad x1 lanes. Two units are
* x4/x1.
*/
- pciec: pcie-controller {
+ pciec: pcie-controller@82000000 {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
@@ -67,28 +67,6 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
- pcie-controller {
- status = "okay";
-
- /* Connected to first Marvell 88SE9170 SATA controller */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /* Connected to second Marvell 88SE9170 SATA controller */
- pcie@2,0 {
- /* Port 0, Lane 1 */
- status = "okay";
- };
-
- /* Connected to Fresco Logic FL1009 USB 3.0 controller */
- pcie@5,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
/* RTC is provided by Intersil ISL12057 I2C RTC chip */
@@ -290,6 +268,28 @@
};
};
+&pciec {
+ status = "okay";
+
+ /* Connected to first Marvell 88SE9170 SATA controller */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* Connected to second Marvell 88SE9170 SATA controller */
+ pcie@2,0 {
+ /* Port 0, Lane 1 */
+ status = "okay";
+ };
+
+ /* Connected to Fresco Logic FL1009 USB 3.0 controller */
+ pcie@5,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+};
+
&mdio {
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
reg = <0>;
@@ -70,15 +70,6 @@
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>;
- pcie-controller {
- status = "okay";
- /* Internal mini-PCIe connector */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
rtc@10300 {
/* No crystal connected to the internal RTC */
@@ -222,6 +213,15 @@
status = "okay";
};
+&pciec {
+ status = "okay";
+ /* Internal mini-PCIe connector */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+};
+
&mdio {
phy0: ethernet-phy@0 {
reg = <0>;
@@ -81,28 +81,6 @@
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
- pcie-controller {
- status = "okay";
-
- /*
- * Connected to Marvell 88SX7042 SATA-II controller
- * handling the four disks.
- */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /*
- * Connected to EtronTech EJ168A XHCI controller
- * providing the two rear USB 3.0 ports.
- */
- pcie@5,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
/* RTC is provided by Seiko S-35390A below */
@@ -230,6 +208,29 @@
};
};
+&pciec {
+ status = "okay";
+
+ /*
+ * Connected to Marvell 88SX7042 SATA-II controller
+ * handling the four disks.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /*
+ * Connected to EtronTech EJ168A XHCI controller
+ * providing the two rear USB 3.0 ports.
+ */
+ pcie@5,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+};
+
+
&mdio {
phy0: ethernet-phy@0 { /* Marvell 88E1512 */
reg = <0>;
PCIe has a range property, so the unit name should contain an address. Take the opportunity to use the node label instead of the full name. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> --- arch/arm/boot/dts/armada-xp-axpwifiap.dts | 44 ++++++++-------- arch/arm/boot/dts/armada-xp-db.dts | 66 ++++++++++++------------ arch/arm/boot/dts/armada-xp-gp.dts | 42 +++++++-------- arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 31 ++++++----- arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 44 ++++++++-------- arch/arm/boot/dts/armada-xp-matrix.dts | 18 +++---- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 2 +- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 2 +- arch/arm/boot/dts/armada-xp-mv78460.dtsi | 2 +- arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 44 ++++++++-------- arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 18 +++---- arch/arm/boot/dts/armada-xp-synology-ds414.dts | 45 ++++++++-------- 12 files changed, 179 insertions(+), 179 deletions(-)