@@ -130,7 +130,7 @@
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- button@1 {
+ button {
label = "Software Button";
linux,code = <KEY_POWER>;
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
@@ -149,19 +149,19 @@
#address-cells = <1>;
#size-cells = <0>;
- button@1 {
+ power {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- button@2 {
+ backup {
label = "Backup button";
linux,code = <KEY_OPTION>;
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- button@3 {
+ reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
@@ -97,19 +97,19 @@
#address-cells = <1>;
#size-cells = <0>;
- button@1 {
+ power {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
debounce-interval = <100>;
};
- button@2 {
+ reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- button@3 {
+ button {
label = "USB VBUS error";
linux,code = <KEY_UNKNOWN>;
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
@@ -121,7 +121,7 @@
pinctrl-0 = <&keys_pin>;
pinctrl-names = "default";
- button@1 {
+ reset {
label = "Factory Reset Button";
linux,code = <KEY_SETUP>;
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -275,13 +275,13 @@
pinctrl-0 = <&keys_pin>;
pinctrl-names = "default";
- button@1 {
+ wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
- button@2 {
+ reset {
label = "Factory Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -119,7 +119,7 @@
#address-cells = <1>;
#size-cells = <0>;
- button@1 {
+ init {
label = "Init Button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
The gpio-key nodes do not have a reg property, so remove the address from the unit name. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> --- arch/arm/boot/dts/armada-370-rd.dts | 2 +- arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi | 6 +++--- arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi | 6 +++--- arch/arm/boot/dts/armada-xp-axpwifiap.dts | 2 +- arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 4 ++-- arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 2 +- 6 files changed, 11 insertions(+), 11 deletions(-)