@@ -119,7 +119,12 @@
reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
};
- devbus_bootcs: devbus-bootcs {
+ /* The following unit addresses (for devbus) are composed of
+ * the target value (bit [40-47]), attributes value (bits
+ * [32-39], and the address value in the window memory: [0-31].
+ */
+
+ devbus_bootcs: devbus-bootcs@f00100010400 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -129,7 +134,7 @@
status = "disabled";
};
- devbus_cs0: devbus-cs0 {
+ devbus_cs0: devbus-cs@f00100010408 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -139,7 +144,7 @@
status = "disabled";
};
- devbus_cs1: devbus-cs1 {
+ devbus_cs1: devbus-cs@f00100010410 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -149,7 +154,7 @@
status = "disabled";
};
- devbus_cs2: devbus-cs2 {
+ devbus_cs2: devbus-cs@f00100010418 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -159,7 +164,7 @@
status = "disabled";
};
- devbus_cs3: devbus-cs3 {
+ devbus_cs3: devbus-cs@f00100010420 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
devbus has a reg property so the unit name should contain an address. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> --- arch/arm/boot/dts/armada-375.dtsi | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)